Unix/Linux Go Back    

OpenSolaris 2009.06 - man page for sys-unconfig (opensolaris section 1m)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

sys-unconfig(1M)		  System Administration Commands		 sys-unconfig(1M)

       sys-unconfig - undo a system's configuration


       The  sys-unconfig  command  is used to restore a system's configuration to an "as-manufac-
       tured" state, ready to be reconfigured again. The system's configuration consists of host-
       name, Network Information Service (NIS) domain name, timezone, IP address, IP subnet mask,
       and root password. This operation is the inverse of those performed by  the  sysidnet(1M),
       sysidns(1M), and sysidsys(1M) programs run at boot. See sysidtool(1M).

       sys-unconfig does the following:

	   o	  Saves current /etc/inet/hosts file information in /etc/inet/hosts.saved.

	   o	  If  the  current  /etc/vfstab  file  contains  NFS  mount  entries,  saves  the
		  /etc/vfstab file to /etc/vfstab.orig.

	   o	  Restores the default /etc/inet/hosts file.

	   o	  Removes the default hostname in /etc/hostname.interface files  for  all  inter-
		  faces  configured  when  this command is run. To determine which interfaces are
		  configured, run the command  'ifconfig-a'.  The  /etc/hostname.interface  files
		  corresponding to all of the interfaces listed in the resulting output, with the
		  exception of the loopback interface (lo0), will be removed.

	   o	  Removes the default domainname in /etc/defaultdomain.

	   o	  Restores the timezone to PST8PDT in /etc/TIMEZONE.

	   o	  Disables the Network Information Service (NIS) and Network Information  Service
		  Plus (NIS+) if either NIS or NIS+ was configured.

	   o	  Removes the file /etc/inet/netmasks.

	   o	  Removes the file /etc/defaultrouter.

	   o	  Removes the password set for root in /etc/shadow.

	   o	  Removes the file /etc/.rootkey.

	   o	  Executes  all system configuration applications. These applications are defined
		  by prior executions of a sysidconfig	-a  application.  (See	sysidconfig(1M)).
		  When	sys-unconfig is run, all system configuration applications are passed one
		  argument, -u.

	   o	  Removes the file /etc/resolv.conf.

	   o	  Removes the file /etc/sysidcfg.

	   o	  Disables	 LDAP	    by	     removing	     /var/ldap/ldap_client_cache,
		  /var/ldap/ldap_client_file,		/var/ldap/ldap_client_cred,	      and

	   o	  Regenerates keys for sshd(1M).

       When sys-unconfig is finished, it performs a system shutdown.  sys-unconfig  is	a  poten-
       tially dangerous utility and can only be run by the super user.


	   process control initialization


	   determines host's domain name


	   specifies an IPv4 host's default router


	   identifies symbolic host name associated with network interface interface


	   host name database


	   network mask database


	   local source for system name


	   super-user's secret key


	   shadow password file


	   system identification configuration file for diskless booting


	   virtual file system table


	   list of NIS+ servers that serve a host's default domain


	   identifies NIS servers to which the client is allowed to bind

       See attributes(5) for descriptions of the following attributes:

       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       |Availability		     |SUNWadmap 		   |

       init(1M),  kdmconfig(1M), sshd(1M), sysidconfig(1M), sysidtool(1M), hosts(4), netmasks(4),
       shadow(4), sysidcfg(4), attributes(5)

       sys-unconfig is not available on diskless clients.

SunOS 5.11				   19 Jul 2007				 sys-unconfig(1M)
Unix & Linux Commands & Man Pages : ©2000 - 2017 Unix and Linux Forums

All times are GMT -4. The time now is 03:52 AM.