8 More Discussions You Might Find Interesting
1. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
2. Solaris
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Discussion started by: eddy_sysad
2 Replies
3. UNIX for Dummies Questions & Answers
Hi,
i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device.
I have used the hardware manager and it shows the tape is present.
Can anyone help me understand why it cannot pick up the tape as a default? (1 Reply)
Discussion started by: ryks
1 Replies
4. SCO
Hello,
I'm having some issues with installing SCSI tape drive on SCO 5.0.6
hardware config shows the following adapters
%adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto
%adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd
%adapter - 3 - ... (3 Replies)
Discussion started by: ananth_ak
3 Replies
5. AIX
Brothers, I have a question on compatible issues.
I have a p570 server running on AIX5.3.0.0 TL04.
Recently I have received a 3590 tape drive with library and I am wonder whether I can make use of this tape drive for my normal daily backup of AIX 5.3.0.0 in p570 server.
Any driver or adapter... (1 Reply)
Discussion started by: kwliew999
1 Replies
6. UNIX for Dummies Questions & Answers
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
Discussion started by: alisevA3
4 Replies
7. Solaris
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the... (2 Replies)
Discussion started by: rajendra.rait
2 Replies
8. Filesystems, Disks and Memory
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
Discussion started by: dennis
4 Replies
AMMT(8) System Manager's Manual AMMT(8)
NAME
ammt - Amanda version of mt
SYNOPSIS
ammt [ -d ] [ -f|-t device ] command [ count ]
DESCRIPTION
Ammt provides just enough of the standard mt command for the needs of Amanda. This is handy when doing a full restore and the standard mt
program has not yet been found.
Ammt also provides access to the Amanda output drivers that support various tape simulations.
See the amanda(8) man page for more details about Amanda. See the OUTPUT DRIVERS section of amanda(8) for more information on the Amanda
output drivers.
OPTIONS
-d Turn on debugging output.
-f device
Access tape device device. If not specified, the TAPE environment variable is used.
-t device
Same as -f.
command count
Which command to issue, and an optional count of operations.
COMMANDS
Each command may be abbreviated to whatever length makes it unique.
eof|weof count
Write count (default: 1) end of file marks (tapemarks).
fsf count
Skip forward count (default: 1) files.
bsf count
Skip backward count (default: 1) files.
asf count
Position to file number count (default: 0) where zero is beginning of tape. This is the same as a rewind followed by a fsf count.
rewind Rewind to beginning of tape.
offline|rewoffl
Rewind to beginning of tape and unload the tape from the drive.
status Report status information about the drive. Which data reported, and what it means, depends on the underlying operating system, and
may include:
ONLINE Indicates the drive is online and ready.
OFFLINE
Indicates the drive is offline or not ready.
BOT Indicates the drive is at beginning of tape.
EOT Indicates the drive is at end of tape.
PROTECTED
Indicates the tape is write protected.
ds Device status.
er Error register.
fileno Current tape file number.
blkno Current tape block number file.
NOTE: many systems only report good data when a tape is in the drive and ready.
AUTHOR
Marc Mengel <mengel@fnal.gov>
John R. Jackson <jrj@purdue.edu>
SEE ALSO
amanda(8)
AMMT(8)
