IP Networking

Hello all expert network administrator, i truly new to networking. Please help me in this problem. /etc/hostname.rl1(Wired Internal interface) inet 10.0.0.1 255.255.255.0 none
/etc/hostname.ral0 : inet 10.0.1.1 255.255.255.0 and others option as well.

/etc/dhcpd.conf : share-network local { subnet 10.0.0.0 netmask 255.255.255.0 options routers 10.0.0.10; range 10.0.0.25 10.0.0.35;}}
share-network wireless { subnet 10.0.1.0 netmask 255.255.255.0 option routers 10.0.0.10 range 10.0.1.5 10.0.1.7 ;}}

output of ifconfig -a | less :
rl0 : inet: 192.168.1.3 netmask:0xffffff00 broadcast:192.168.1.255
rl1: No ip address becuase i didn't plugin cable
ral0: 10.0.1.1 netmask:0xffffff00 broadcast:10.0.1.255

Output of netstat -r | less :

Destination Gateway Flags Refs Use MTU Interface
default 219.93.218.177 UGS 11 618516 - tun0
10.0.1/24 link#3 UC 0 82 - ral0
localhost localhost UH 0 82 33224 lo0
192.168.1/24 link#1 UC 1 0 - rl0
192.168.1.1 00:30:0a:93:b0:58 UHLc 1 33 - rl0
219.93.218.177 103.17748.60 UH 1 0 1492 tun0
I really run out of idea . PLease help me. Thanks for your help. Your help is greatly appreciated by me and others.

Guy, you seriously need to parse better, that reads like a damned mess.

Cables have absolutely nothing to do with an interface having an IP address, so the problem lies not in your original assumption.

Take a look in your dmesg and see if there are IRQ or rl1 related errors for one, but also attempt to manually set the IP.

If it's any help I use a NetBSD as my gateway, I have two RealTek 8139 cards, as rtk0 and rtk1,

my rtk0 is on the same subnet as my ADSL router

my rtk1 is on my internal subnet

consider each subnet separately, what address and subnets do they need. Confirm the connectivity on each subnet separately.

Next, sort out routing, I enable IP routing and set my default gateway to point to the ADSL router.

Then, if you wish, sort out a local DNS server on the gateway.

And finally add a DHCPD server to provide local IP addresses on your internal subnet for DHCP enabled machines.

Any other advises ?

I have absolutely no idea what your problem is, I've posted a sensible step by step approach to setting up a gateway. If you follow the process then perhaps we can solve the problem by getting each stage to work, but at the moment you've just sent us a mess of unintelligable information.

Problem : My wired canot get any address from dhcpd server and my wireless connection can get address but cannot ping my gateway which is 10.0.0.10.

My wired interface even cannot get any i address from dhcp server even when i plugin the wired.

what happens if you use ifconfig to explicitly configure it as a static IP address with the appropriate netmask?

What network is your gateway on because it is not the same as your wireless if that is