9 More Discussions You Might Find Interesting
1. IP Networking
Hello All,
I have one requirement in which, i have 3 connections one ADSL and two 4G dongle (Jio/Airtel).
Where i need to configure ADSL and 4G connections, which i have configured and able to connect internet throught them,
Now i need to create set-up for failover and fall back between them,... (0 Replies)
Discussion started by: linux.amrit
0 Replies
2. Shell Programming and Scripting
Hello,
First of all, congratulations on this forum! Very mice material!
This is my fist thread and it has to do with connecting to an adsl modem and executing some commands.
Heres what I do:
$username = 'admin';
$passwd = 'admin';
$telnet = new Net::Telnet ( Timeout=>10,... (2 Replies)
Discussion started by: Ravendark
2 Replies
3. Solaris
Hello all,
granted that I am an absolute beginner with Solaris, I'd like to use my adsl modem, t's a Zyxel prestige 630.
I managed to install and configure it under Ubuntu using the drivers from Conexant AccessRunner ADSL USB modems with Linux ; is there a chance to do the same under Solaris 10... (0 Replies)
Discussion started by: clalfa
0 Replies
4. IP Networking
I have RedHat 9.0 installed on three of my servers (PIII - 233MHz) and want that they share a common IP address so that any request made reaches each of the servers.
Can anyone suggest how should I setup my LAN. I'm new to networking in Linux so please elaborate and would be thankful for a timely... (2 Replies)
Discussion started by: Rakesh Ranjan
2 Replies
5. Solaris
Hi,
I have USB Siemens Santis 100 ADSL modem.I need driver for this modem on Solaris 10.Please help me with some info.Platform is x86.Thanks. (2 Replies)
Discussion started by: Upravnik
2 Replies
6. UNIX for Dummies Questions & Answers
Hello, everyone. I have a little favor to ask. Me and my friends decided sharing an ADSL line with four PCs.
PC no.1: Desktop, two netcard (2000 and 8139), Mandrake 9.0
PC no.2: Acer notebook, PC Card, RTL-8139C/8139C+, MS 98 + Win 2000 Pro
PC no.3: Desktop, net card 8139, WindowME + Win 2000... (1 Reply)
Discussion started by: HOUSCOUS
1 Replies
7. UNIX for Dummies Questions & Answers
Hey everyone, just to let you all know "I'm an uber n00b"
I'm connected to Telstra Bigpond's (Australian ISP) ADSL network, now I;m running Darwin 1.41 on an Apple Macintosh PPC computer.
I don't know how to set up ADSL on this system, can someone please guide me. (3 Replies)
Discussion started by: Syphor
3 Replies
8. UNIX for Dummies Questions & Answers
Hi everyone,
This is basically my problem. I setup freebsd, and wanted to get my adsl connection up which uses pppoe to connect. I followed the steps in this (http://free.mine.nu/~squirrel/PPPoE/FreeBSD%20PPPoE%20Howto.htm) manual and configured everything successfully. The problem begins when i... (7 Replies)
Discussion started by: Luftwaffe
7 Replies
9. IP Networking
Is ADSL support available for Unix/Linux? If I want to set up a internet server, will it have to be Windows with a seperate unix box? Or can it be a clean unix server? (2 Replies)
Discussion started by: vannie
2 Replies
CIDR(7) Miscellaneous Information Manual CIDR(7)
NAME
CIDR, cidr - Classless Inter-Domain Routing
DESCRIPTION
Classless Inter-Domain Routing, also known as CIDR, is an Internet addressing architecture designed to solve two problems: the growth in
the size of the routing tables in the top-level routers and the exhaustion of Class B address space. To solve these problems, CIDR relies
on a new means of distributing the allocation of Internet address space and on a concept known as route aggregation.
For an up-to-date list of Frequently Asked Questions (FAQ) about CIDR, retrieve the CIDR FAQ from either of the following locations:
http://www.rain.net/faqs/cidr.faq.html
http://www.ibm.net.il/~hank/cidr.html
Address Space Allocation
The traditional 32-bit Internet address is divided into a network part and a host part. The size of each part depends on the network class
to which the address belongs. The following table shows the sizes of each part for Class A, Class B, and Class C networks.
-----------------------------------------------------------------------
Network Size of Network Part (in bits) Size of Host Part (in bits)
-----------------------------------------------------------------------
Class A 8 24
Class B 16 16
Class C 24 8
-----------------------------------------------------------------------
In this scenario, each physical network or LAN uses a single network number. While the idea seems sound, most organizations seldom create
a single network containing thousands of hosts, choosing instead to divide their networks using routers. For organizations with Class B
addresses, this wastes valuable addresses.
To cope with the various network topologies, the concept of subnetworks or subnetting emerged. In a subnet, the network part of the
address consists of the network part and a portion of the host part. The bitmask convering these two parts is called the subnet mask. The
area of the host part that is covered by the subnet mask identifies the subnet. This process allows you to identify individual LANS by
their subnet number within the larger network number. The only way to communicate between two or more subnets is through a router.
Currently, routers make routing decisions by extracting the network portion of an IP address and looking it up in their routing table. This
forces some IP routers to store each network number connected to the Internet in their routing table.
For many organizations, a Class C network (254 hosts) is too small, whereas a Class B network (65534 hosts) is too large, resulting in poor
address space utilization.
Route Aggregation
The Internet Advisory Board (IAB) and Internet Engineering Task Force (IETF) have decided to eliminate the notion of IP address classes and
to direct routers to make routing decisions based on a variable-length, contiguous IP address prefix. This is what is meant by classless
routing. Under this scenario, an Internet Service Provider (ISP) that had previously announced 256 contiguous Class C networks to the
Internet, now only has to announce a single prefix, with 16 significant bits, for all these networks. This prefix is referred to as an
aggregate, and the network is referred to as a supernet. If the ISP needed to add additional customers to its network, it could do so
without modifying the routing announcements to the rest of the Internet.
Aggregating networks reduces the number of routers in a network and enables you to make optimum use of bridges and high-speed switches.
EXAMPLES
This section describes one example of a Class C supernet. If organization A requires 1000 addresses, it might have the following Class C
networks: 212.221.32.0, 212.221.33.0, 212.221.34.0, and 212.221.35.0. Using current Class C addressing specifications, organization A's
network mask and network numbers are as follows: /------------24 bits----------- 1111 1111 1111 1111 1111 1111 0000 0000 = mask
255.255.255.0 1101 0100 1101 1101 0010 0000 0000 0000 = network 212.221.32.0 1101 0100 1101 1101 0010 0001 0000 0000 = network
212.221.33.0 1101 0100 1101 1101 0010 0010 0000 0000 = network 212.221.34.0 1101 0100 1101 1101 0010 0011 0000 0000 = network
212.221.35.0 --------network address-------/ --host--/
address Typically, software compares all network address bits that are covered by the network mask (1
bits) to determine the effective network address. Because the network addresses covered by the 24-bit network mask are different, traffic
from one network to another requires a router. In addition, routes to each of the four networks are advertised to the rest of the Inter-
net, and occupy space in the routers' routing tables.
Under CIDR rules, organization A could shorten their network mask from 24 bits under current rules to 22 bits. The result is a network mask
of 255.255.252.0, as follows: /-----------22 bits---------- 1111 1111 1111 1111 1111 1100 0000 0000 = mask 255.255.252.0 1101 0100
1101 1101 0010 0000 0000 0000 = network 212.221.32.0 1101 0100 1101 1101 0010 0001 0000 0000 = network 212.221.33.0 1101 0100 1101
1101 0010 0010 0000 0000 = network 212.221.34.0 1101 0100 1101 1101 0010 0011 0000 0000 = network 212.221.35.0 1101 0100 1101 1101
0010 0011 0000 0000 = network 212.221.35.0 -------network address------/----host----/
address Because the network addresses covered by the 22-bit network mask are the same, traffic from one
network to another does not require a router. Instead, the software uses Address Resolution Protocol (ARP) to acquire direct connection to
the network.
The address 212.221.32.0 with the mask 255.255.252.0 identifies all networks belonging to organization A. Expressed in CIDR format, orga-
nization A's network address is 212.221.32.0/22. This effectively aggregates all routes under one network address. This also means that
only one route is advertised to the rest of the Internet. If a router sees traffic addressed to 212.221.33.5 with the netmask of
255.255.252.0, the traffic is addressed to network 212.221.32.0.
Using a network mask of 255.255.252.0, organization A can have a single bridged network of 1022 hosts (hosts 0 and 1024 are reserved for
the broadcast address). Using a network mask of 255.255.254.0, organization A can have two bridged networks of 510 hosts (host 0 and 512
are reserved for the broadcast address).
These techniques are not currently implemented in all host software, and should be implemented in networks with great care. However, the
IETF suggests that host software be modified to allow for classless routing.
RELATED INFORMATION
Commands: netstat(1), ifconfig(8), route(8).
RFC1517, Applicability Statement for the Implementation of Classless Inter-Domain Routing (CIDR)
RFC1518, An Architecture for IP Address Allocation with CIDR
RFC1519, CIDR Address Strategy
RFC1520, Exchanging Routing Information Across Provider Boundaries in the CIDR Environment delim off
CIDR(7)