Routing problem : two interfaces one gateway

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different....

2. IP Networking

Network Interfaces Problem - Monitoring equipment

Dear gurus of Linux / Unix. I have a server, which I use to monitoring traffic, the problem that I find is when I run the following command: probe:~ # sar -n DEV 1 I see that I one second appear info in some interface and in the other second no appear, I don't know what will be the...

3. AIX

Problem with multiple network interfaces

Hi .. we have two AIX 5.3 systems with a small client server app communicating over a TCP socket. Box A has a single network interface where the server app (in Java) opens a well known port and waits for connections from Box B. Box B has two network interfaces, X and Y. Interface X has the...

4. Solaris

Routing problem

Hi, I have two physical interfaces on a servers. We have connected them to differerent subnets. 1) First interface: 10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1 (It is added as default gateway) It is existing set up. It works well 2) Second interface: ...

5. IP Networking

Problem when I Open my WireShark - No Interfaces Option available

Hi gurus of unix, I haved installed my openSolaris in a HP530, Recently I use the following command beadm destry opensolaris1 beadm destry opensolaris2 After That I reboot my Laptop. Well when I go to my work I try to open my wireshark tool, but the option in GUI interface does not appear!!!...

6. Debian

/etc/network/interfaces problem

Hello i am configuring a debian lenny sever ,/etc/network/interfaces is modified so that eth1 takes a static IP address then i save it wq! then i restart the networking , /etc/init.d/networking restart . but after reboot ,the file is reset ,note that the interfaces had by defauklt IPv6 address...

7. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ...

8. Linux

Routing via several interfaces for hosted virtual machines

My setup consists of a hardware node, which hosts several virtual machines (OpenVZ, to be precise). The hardware node has two network interfaces (<ifA>, <ifB>) connected to different subnets (<networkA>, <networkB>). I want to route the traffic of certain VEs over <ifB> while routing the other VEs...

9. SCO

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully...

10. IP Networking

Network interfaces problem

LEARN ABOUT HPUX

mrinfo

mrinfo(1M)																mrinfo(1M)

NAME

       mrinfo - Multicast Routing Configuration Information Tool

SYNOPSIS

       debuglevel] retries] timeout] [ multicast-router ]

DESCRIPTION

       requests  the configuration information from the multicast-ourter, and prints the information to the standard out.  multicast-router can be
       either an IP address or a system name.  sends out the ASK_NEIGHBORS igmp  message  to  the  specified  multicast-router,  when  the  router
       receives  the request, it sends back its configuration information. If the multicast-router is not specified, the request is sent the local
       router.

       The the configuration information for each interface is printed in the following format:

       If there are multiple neighbor routers on one interface, they will all be reported on the output.  The possible values for flag are:

       Neighbors are reached via tunnel.

       The tunnel uses IP source routing.

       The interface is down.

       The interface is administratively disabled for multicast routing.

       The local router is the querier of the subnet.

       Please see mrouted(1M) for and

       The command line options are:

       Sets the level for printing out the debug message. The default is 0,
		     only error and warning messages will be printed. Debug level three prints most the messages.

       Sets the retry times to pull the routing daemon for information. The
		     default is 3.

       Specifies the timeout value in seconds for waiting the reply. The default value
		     is 4.

EXAMPLE

       The following is an example of quering the multicasting configuration from the local routing daemon.

	      127.0.0.1 (localhost) [version 3.3]:
		15.13.106.144 -> 15.13.106.145 (hpntcbs.cup.hp.com) [10/1/querier]
		193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
		15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
		15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]

   Note
       must be run as root.

AUTHOR

       was developed by Van Jacobson.

SEE ALSO

       mrouted(1M), map-mbone(1M).

																	mrinfo(1M)

IP Networking