Does cisco 1921 router support site to site VPNs using IPSec?
Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? "
A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that package but you would want to check and be sure.
I bought a Cisco 892-k9 router and I am having in issue trying to setup the initial configuration. Does someone have a sampl configuration for a single subnet that I can use for my configuration?
Thanks. (0 Replies)
Hi @all,
I try to connect 2 LANs with IPSec/Openswan
LAN 1: 192.168.0.0/24
LAN 2: 192.168.1.0/24
This is my Config:
conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ... (1 Reply)
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)
I having problem connecting to a Cisco PIX
Log from IKE
# /usr/lib/inet/in.iked -f /etc/inet/ike/config -d
Jan 16 00:40:57: 2012 (+0800) *** in.iked started ***
Jan 16 00:40:57: Loading configuration...
Jan 16 00:40:57: Checking lifetimes in "nullrule"
Jan 16 00:40:57: Using default value... (0 Replies)
Hello all,
I have set up dhcpd on a linux box for serving subnets on multiple vlans configured on a Cisco 6500 with ip helper of the dhcp server. Servers get dhcp leases just fine, however, some machines lose their connection for reboot or what not and I can not get their lease back even though... (0 Replies)
Setup a site to site VPN between two cisco routers.
One of the site locations is unable to access ports such as https://example.com:9001
How do I let them go into port 9001?
They can ssh, ftp, telnet and everything else.
Is this a VPN issue or ACL access issue?
I put
permit ip host... (0 Replies)
Hello,
Does anyone know where I can find configuration information on setting up
a dial in VPN on Cicso IOS for a bunch of servers.
Could not seem to find anything in search engines.
Thanks (0 Replies)
Dear All,
I have worked with xDSL routers working in bridged mode, and linux behind them working as a Firewall utilizing IPTABLES. My question is, how this will change if the xDSL router is replaced with a Cisco Router?
I mean to ask that, can I assign a public ip on the linux machine, which... (0 Replies)
Hi All,
I am connected to a cisco router and I want to know the hostname of this router.
I connect as telnet <IPADDRESS>
and the prompt shows
vpnaccess-bristol>
But I want to know the full hostname of the router how can i do that.
When i type the hostname command the following... (3 Replies)
Net::CLI::Interact::Manual::Phrasebook(3pm) User Contributed Perl Documentation Net::CLI::Interact::Manual::Phrasebook(3pm)NAME
Net::CLI::Interact::Manual::Phrasebook - List of Supported CLIs
INTRODUCTION
The bundled phrasebook includes support for a variety of network device CLIs. Many were contributed by users of the module. If you set up
a new CLI dictionary, please consider contributing it back! The phrasebook specification is given in Net::CLI::Interact::Phrasebook.
For each supported CLI, there is a name which must be passed in the "personality" option to Net::CLI::Interact's "new()" method. After
that, you can call the included Macros, and the module will use the included Prompt to match the current state of the CLI. More information
is available in the Tutorial and Cookbook.
Below is a list of all current bundled CLI dictionaries. Each lists its name, the available Prompts, Macros and Continuations, and from
which other CLI dictionaries it inherits.
IOS # Cisco IOS
CatOS # for older, pre-IOS Cisco devices
PIXOS # for PIX OS-based devices
PIXOS7 # Slightly different commands from other PIXOS versions
FWSM # currently the same as 'PIXOS'
FWSM3 # for FWSM Release 3.x devices (slightly different to FWSM 2.x)
JunOS # Juniper JUNOS support
HP # HP support
Nortel # Nortel support
ExtremeOS # Extreme Networks support
Foundry # Foundry/Brocade device support
PERSONALITIES
Cisco
This personality goes by the name of "cisco" and provides a basis for many other CLI dictionaries.
Prompts are "basic", "privileged", "configure", "user", and "pass".
Macros are "begin_privileged", "end_privileged", "begin_configure", "end_configure", and "disconnect".
CatOS
This personality goes by the name of "catos" and inherits from the "cisco" dictionary.
Additionally it provides the "privileged" Prompt.
Additionally it also provides the "paging" Macro to set the terminal page size.
ExtremeOS
This personality goes by the name of "extremeos" and inherits from the "cisco" dictionary.
Additional Prompts are "basic", "privileged", "configure", "user", and "pass".
Additional Macros are "begin_privileged", "end_privileged", and "disconnect".
Foundry / Brocade
This personality goes by the name of "foundry" and inherits from the "cisco" dictionary. Before connecting to the device you probably want
to set the output separator to be:
$nci->transport->ors("
");
For users of Net::Appliance::Session this should be:
$session_obj->nci->transport->ors("
");
IOS
This personality goes by the name of "ios" and inherits from the "cisco" dictionary.
Additionally it provides the "paging" Macro to set the terminal page size.
HP
This personality goes by the name of "hp" and inherits from the "cisco" dictionary.
Additionally it provides the "basic" and "user" Prompts.
JunOS
This personality goes by the name of "junos" and inherits from the "cisco" dictionary.
Additionally it provides the "privileged", "configure", and "user" Prompts.
Additionally it also provides the "begin_configure" and "paging" Macros.
Nortel
This personality goes by the name of "nortel" and inherits from the "cisco" dictionary.
Additionally it provides the "user" Prompt.
PIXOS
This personality goes by the name of "pixos" and inherits from the "cisco" dictionary.
Additionally it provides the "paging" Macro to set the terminal page size.
It can be used in its own right for Cisco PIX firewalls, but is also used as a base for other dictionaries.
PIXOS 7
This personality goes by the name of "pixos7" and inherits from the "pixos" dictionary.
Additionally it provides the "paging" Macro to set the terminal page size.
FWSM
This personality goes by the name of "fwsm" and inherits from the "pixos" dictionary.
It provides no further functionality, as Cisco FWSM software version 1 and 2 was the same as the PIX OS.
FWSM 3
This personality goes by the name of "fwsm3" and inherits from the "pixos" dictionary.
Additionally it provides the "paging" Macro to set the terminal page size.
perl v5.14.2 2012-06-12 Net::CLI::Interact::Manual::Phrasebook(3pm)