How to show Cisco Router Running Configuration in Third Party Application

9 More Discussions You Might Find Interesting

1. IP Networking

Need help configuring Cisco 892-k9 router

I bought a Cisco 892-k9 router and I am having in issue trying to setup the initial configuration. Does someone have a sampl configuration for a single subnet that I can use for my configuration? Thanks.

2. Hardware

How to view Cisco WS-C2960S-24TD-L OutPut/Configuration?

Recently, I want to see how to get a hold of a report showing the output/ configuration on my Catalyst 2960S 24 GigE, 2 x 10G SFP+ LAN Base switch ( basically, a report stating if all ports are functioning or not). Any help would be greatly appreciated. Thank you! Cisco WS-C2960S-24TD-L Switch...

3. Shell Programming and Scripting

Expect script to show cisco configs

I know there are better ways to do this. I prefer snmp. I do not have the proper perl modules loaded on the platorm. Snmp isnt loaded on the platform. Telnet is not an option. I need to write an expect script to pull cisco equipment configs. The following code is executed once I gain...

4. IP Networking

cisco switch + firewall configuration upgrade

Hi experts, I need to cope configuration from one switch/firewall to another switch/firewall. I have copied running configs. The question is do I have to clear the existing configuration on the dest. devices Or can I copy it(replace) directly without clearing previous config ? If...

5. IP Networking

isc dhcpd and cisco router

Hello all, I have set up dhcpd on a linux box for serving subnets on multiple vlans configured on a Cisco 6500 with ip helper of the dhcp server. Servers get dhcp leases just fine, however, some machines lose their connection for reboot or what not and I can not get their lease back even though...

6. IP Networking

Setup Dial In VPN on Cisco Router

Hello, Does anyone know where I can find configuration information on setting up a dial in VPN on Cicso IOS for a bunch of servers. Could not seem to find anything in search engines. Thanks

7. IP Networking

Linux behind a cisco router

Dear All, I have worked with xDSL routers working in bridged mode, and linux behind them working as a Firewall utilizing IPTABLES. My question is, how this will change if the xDSL router is replaced with a Cisco Router? I mean to ask that, can I assign a public ip on the linux machine, which...

8. Shell Programming and Scripting

Perl telnet to cisco router and compare the ping ms

All Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action.. if i do the telent and in perl script then .... e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip...

9. UNIX for Advanced & Expert Users

Cisco Router command to get hostname

Hi All, I am connected to a cisco router and I want to know the hostname of this router. I connect as telnet <IPADDRESS> and the prompt shows vpnaccess-bristol> But I want to know the full hostname of the router how can i do that. When i type the hostname command the following...

LEARN ABOUT HPUX

map-mbone

map-mbone(1M)															     map-mbone(1M)

NAME

       map-mbone - Multicast Router Connection Mapper

SYNOPSIS

       debuglevel] retries] timeout] [multicast-router]

DESCRIPTION

       requests  the multicast router connection information from the multicast-router, and prints the information to the standard out.  sends out
       the ASK_NEIGHBORS igmp message to the multicast-router.	When the multicast-router receives the request, it sends  back	its  configuration
       information.  multicast-router can be either an ip address or a system name.

       If  the	multicast-router is not specified, flood mode is on by default and the igmp request message is sent to all the multicast router on
       the local network. With flood mode on, when finds new neighbor routers from the replies, it will send the same  igmp  request  to  the  new
       neighbor routers. This activity continues until no new neighbor routers are reported in the replies.

       The command line options are:

	      Sets the level for printing out the debug message. The default is 0,
			    which prints only error and warning messages. Debug level three prints most the messages.

	      Sets the retry times to poll the routing daemon for information. The
			    default is 1.

	      It specifies the timeout value in seconds for waiting the reply. The
			    default value is 2 seconds.

	      Sets the	    flood mode on. It is the default value when no multicast-router is given on the command line input.

	      Generates output in GRaphEd format.

	      Disable DNS lookup for the multicast router names.

       The output contains the interface configuration information of the requested router(s).	The format for each interface output is:

       If there are multiple neighbor routers on one interface, they will all be reported.  The neighbor_name will not be printed if the option is
       specified on the command line.

       The possible values for are:

	      Neighbors are reached via tunnel.

	      The tunnel uses IP source routing.

	      The interface is down.

	      The interface is administratively disabled for multicast routing.

	      The local router is the querier of the subnet.

       The format of the GRaphEd output is:

       If there is no neighbor router on an interface, then a will be put next to the node_name. If there are multiple	neighbor  routers  on  one
       interface, all of them will be reported.  The possible values for are:

	      The neighbor is reached via tunnel.

	      The neighbor is on the same network/subnet.

	      The interface is down.

	      Please see mrouted(1M) for and

EXAMPLES

       Querying for the multicast router connection information.

       127.0.0.1 (localhost) [version 3.3]:
	 193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
	 15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
	 15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]

       Querying for multicast router connectivity with option:

       GRAPH "Multicast Router Connectivity: Wed Feb  1 17:34:59 1995"=UNDIRECTED
	 252537488 {$ NP 1440 1060 $} "hpntc1t.cup.hp.com*"
	   ;
	 252538974 {$ NP 940 1120 $} "hpntcbs.cup.hp.com"
	   252537488 "10/1E"
	   252539807 "1/1P"
	   ;
	 252539807 {$ NP 1590 1150 $} "hpntc1h.cup.hp.com*"
	   ;

   Note
       must be run as root.

AUTHOR

       was developed by Pavel Curtis.

SEE ALSO

       mrouted(1M), mrinfo(1M).

																     map-mbone(1M)

IP Networking