IPTables question


 
Thread Tools Search this Thread
Special Forums IP Networking IPTables question
# 1  
Old 02-20-2011
IPTables question

Hope someone can help cus m really stuck.
Im pretty good at making basic IPTables rules to get what i need done, but this one has me beat.

I have only 1 Nic in my linux box , and its setup as a trunk to my switch.
I have 5 vlans setup on it:

eth0.1000
eth0.1001
eth0.1002
eth0.1003
eth0.1004

I can get it to route between the vlans without trouble using a simple
-A INPUT -i eth0.1000 -j ALLOW
-A INPUT -i eth0.1001 -j ALLOW
-A INPUT -i eth0.1002 -j ALLOW
......ect
With forward, input and output set to accept.

Now if I ssh to any machine on any Vlan it routes between them perfectly.

PROBLEM IS:

Reversing the accept to drop and lock down the routes to just allow SSH.
If tried things like -A FORWARD -i eth0.1000 -o eth0.1001 ect and I cant get it to allow ssh from and to my separate vlans.

Can anyone help, all i want is a basic iptables to allow ssh from any machine on any vlan to any machine on any vlan, but block everything else.

Thanks for ANY advice.

Steve
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Multi-table iptables Question

I have a question regarding IPTables packet flow, that I am hoping I can get an answer to. We have a fairly advanced implementation of IPTables that I am trying to convert into a third party product and I am not quite certain on the packet flow in the current IPTables implementation. We are... (2 Replies)
Discussion started by: knightfirefx
2 Replies

2. IP Networking

iptables question

I have two programs, a datagram socket based sender and a datagram socket based receiver. The sender emits a short UDP message to 192.168.0.100:33333 every second. The receiver creates a datagram socket with a default port number (let's say it is 44444), clears the iptables adds the following rule:... (4 Replies)
Discussion started by: michaelrusse
4 Replies

3. Cybersecurity

iptables question.

I am setting up a new squid daemon to run on my server. I want to make sure that everyone inside my network can access squid but I want to make sure everyone on the internet is blocked. eth0 is connected to my internal LAN via: 192.168.0.5/255.255.255.0 eth1 is connected to the internet via:... (1 Reply)
Discussion started by: nondescriptciti
1 Replies

4. UNIX for Dummies Questions & Answers

help with iptables

Hi, On the IPTABLES, I did iptables --flush. I want to start fresh. Now I only want two things. Allow one ip address to this server. Allow port 443 as incoming from every where. Please advice how to do this. This is what I did so for. iptables -I INPUT -i eth0 -s 1.2.3.4 -j ACCEPT... (5 Replies)
Discussion started by: samnyc
5 Replies

5. IP Networking

Iptables

What should be the iptables rule so that only the subnet 64.61.11.224/255.255.255.248 may access the mysql port 3306 (1 Reply)
Discussion started by: proactiveaditya
1 Replies

6. IP Networking

Need help with iptables

Trying to create a whitelist to limit bandwidth. My sync speed is 1536/256 kbps. Simple rules in order: 1. Do not limit (or set to 1536/256) MAC 00:00:00:00:00 (computer is in 192.168.1.0/24). 2. Do not limit (or set to 1536/256) MAC 00:00:00:00:01 (computer is in 192.168.1.0/24). 3. Do not... (1 Reply)
Discussion started by: kripz
1 Replies

7. Linux

iptables question need help

Description i used iptables firewall is a month,running is favorable.it is failed when i connecting to my server on time.the servers' web service and all ports did not connect.i remote login the other server and through intranet address login this server then i restart iptables .but through... (0 Replies)
Discussion started by: proceed
0 Replies

8. IP Networking

IPtables

Hey guys, I have just started using IP tables and was wondering if anyone could direct me to any good online resources as I am totally new to this. Thanks. (1 Reply)
Discussion started by: 182x
1 Replies
Login or Register to Ask a Question
merge(1)						      General Commands Manual							  merge(1)

NAME
merge - three-way file merge SYNOPSIS
file1 file2 file3 DESCRIPTION
combines two files that are revisions of a single original file. The original file is file2, and the revised files are file1 and file3. identifies all changes that lead from file2 to file3 and from file2 to file1, then deposits the merged text into file1. If the option is used, the result goes to standard output instead of file1. An overlap occurs if both file1 and file3 have changes in the same place. prints how many overlaps occurred, and includes both alterna- tives in the result. The alternatives are delimited as follows: lines in file1 lines in file3 If there are overlaps, edit the result in file1 and delete one of the alternatives. This command is particularly useful for revision control, especially if file1 and file3 are the ends of two branches that have file2 as a common ancestor. EXAMPLES
A typical use for is as follows: 1. To merge an RCS branch into the trunk, first check out the three different versions from RCS (see co(1)) and rename them for their revision numbers: 5.2, 5.11, and 5.2.3.3. File 5.2.3.3 is the end of an RCS branch that split off the trunk at file 5.2. 2. For this example, assume file 5.11 is the latest version on the trunk, and is also a revision of the "original" file, 5.2. Merge the branch into the trunk with the command: 3. File 5.11 now contains all changes made on the branch and the trunk, and has markings in the file to show all overlapping changes. 4. Edit file 5.11 to correct the overlaps, then use the command to check the file back in (see ci(1)). WARNINGS
uses the ed(1) system editor. Therefore, the file size limits of ed(1) apply to AUTHOR
was developed by Walter F. Tichy. SEE ALSO
diff3(1), diff(1), rcsmerge(1), co(1). merge(1)