I would like to ask you what would you recommend me to check if :
Code:
9:root@xxxxxxx:/root # clstat -a
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
Additional information for verifying the SNMP configuration on AIX 6
can be found in /usr/es/sbin/cluster/README5.4.1.UPDATE
9:root@xxxxxxx:/root # cldump
cldump: Waiting for the Cluster SMUX peer (clstrmgrES)
to stabilize.............
Failed retrieving cluster information.
There are a number of possible causes:
clinfoES or snmpd subsystems are not active.
snmp is unresponsive.
snmp is not configured correctly.
Cluster services are not active on any nodes.
Refer to the HACMP Administration Guide for more information.
Additional information for verifying the SNMP configuration on AIX 6
can be found in /usr/es/sbin/cluster/README5.4.1.UPDATE
The OS is :
Code:
5300-11-05-1036
The hacmp version is :
Code:
9:root@xxxxxxx:/root # lslpp -l | grep cluster
cluster.adt.es.client.include
cluster.adt.es.client.samples.clinfo
cluster.adt.es.client.samples.clstat
cluster.adt.es.client.samples.libcl
cluster.adt.es.java.demo.monitor
cluster.es.cfs.rte 5.4.1.5 COMMITTED ES Cluster File System Support
cluster.es.client.lib 5.4.1.6 COMMITTED ES Client Libraries
cluster.es.client.rte 5.4.1.7 COMMITTED ES Client Runtime
cluster.es.client.utils 5.4.1.7 COMMITTED ES Client Utilities
cluster.es.client.wsm 5.4.1.5 COMMITTED Web based Smit
cluster.es.cspoc.cmds 5.4.1.7 COMMITTED ES CSPOC Commands
cluster.es.cspoc.dsh 5.4.1.0 COMMITTED ES CSPOC dsh
cluster.es.cspoc.rte 5.4.1.4 COMMITTED ES CSPOC Runtime Commands
cluster.es.ercmf.cmds 5.4.1.1 COMMITTED ES HACMP - ERCMF Commands
cluster.es.ercmf.rte 5.4.1.0 COMMITTED ES HACMP - ERCMF PPRC Runtime
cluster.es.plugins.dhcp 5.4.1.0 COMMITTED ES Plugins - dhcp
cluster.es.plugins.dns 5.4.1.0 COMMITTED ES Plugins - Name Server
cluster.es.plugins.printserver
cluster.es.server.cfgast 5.4.1.0 COMMITTED ES Two-Node Configuration
cluster.es.server.diag 5.4.1.7 COMMITTED ES Server Diags
cluster.es.server.events 5.4.1.7 COMMITTED ES Server Events
cluster.es.server.rte 5.4.1.7 COMMITTED ES Base Server Runtime
cluster.es.server.simulator
cluster.es.server.testtool
cluster.es.server.utils 5.4.1.7 COMMITTED ES Server Utilities
cluster.license 5.4.1.1 COMMITTED HACMP Electronic License
cluster.msg.En_US.cspoc 5.4.1.0 COMMITTED HACMP CSPOC Messages - U.S.
cluster.msg.En_US.es.client
cluster.msg.En_US.es.server
cluster.msg.en_US.cspoc 5.4.1.0 COMMITTED HACMP CSPOC Messages - U.S.
cluster.msg.en_US.ercmf 5.4.0.0 COMMITTED HACMP ERCMF Messages - U.S.
cluster.msg.en_US.es.client
cluster.msg.en_US.es.server
cluster.sgn 5.4.0.0 COMMITTED Signature File for Hacmp
cluster.sng 5.4.0.0 COMMITTED Signature File for Hacmp
cluster.xd.license 5.4.1.0 COMMITTED HACMP XD Feature License
cluster.es.client.lib 5.4.1.6 COMMITTED ES Client Libraries
cluster.es.client.rte 5.4.1.7 COMMITTED ES Client Runtime
cluster.es.cspoc.rte 5.4.0.0 COMMITTED ES CSPOC Runtime Commands
cluster.es.ercmf.rte 5.4.1.0 COMMITTED ES HACMP - ERCMF PPRC Runtime
cluster.es.server.diag 5.4.1.0 COMMITTED ES Server Diags
cluster.es.server.events 5.4.1.0 COMMITTED ES Server Events
cluster.es.server.rte 5.4.1.7 COMMITTED ES Base Server Runtime
cluster.es.server.simulator
cluster.es.server.utils 5.4.1.7 COMMITTED ES Server Utilities
cluster.man.en_US.es.data 5.4.1.3 COMMITTED ES Man Pages - U.S. English
everything looks ok there.
Then I have checked /usr/es/sbin/cluster/etc/clhosts for 127.0.0.1 # HACMP/ES for AIX
and it is there.
This all I have checked on both nodes.
Do you have any idea what I could check/fix next ? Please.
Thank you.
---------- Post updated at 04:27 PM ---------- Previous update was at 04:20 PM ----------
I have noticed that in /usr/tmp/snmpdv3.log I am getting this error while starting:
Code:
11/15/10 03:38:16 PM - Dynamic configuration initialized.
11/15/10 03:38:16 PM - Using file /etc/snmpdv3.conf for configuration.
11/15/10 03:38:16 PM - Using existing file /etc/snmpd.boots for boots initialization.
11/15/10 03:38:16 PM - Tracing is set to 0.
11/15/10 03:38:16 PM - snmpd: 1473-148 Line number 175 contains an unsupported keyword : snmpd.
11/15/10 03:38:16 PM - SNMP agent: initialization complete.
I have checked that line and is this line from snmpdv3.conf:
Code:
snmpd smuxtimeout=200 #muxatmd
Do you think this could that be problem ? I can not do any testing until I am sure that it will be resolved.
11/15/10 03:38:16 PM - snmpd: 1473-148 Line number 175 contains an unsupported keyword : snmpd.
11/15/10 03:38:16 PM - SNMP agent: initialization complete.
I have checked that line and is this line from snmpdv3.conf:
Code:
snmpd smuxtimeout=200 #muxatmd
[...]
You cannot do any harm by disabling this particular entry. So just insert a # at the beginning of this line and try again. Does the cluster verification work?
I have tried to comment it out , but it didn't help.
Then I did verification on node1 and it started to work on node1.
Then I did verification on node2 and it started to work on node2 as well.
I have troubles making clstat work. All the "usual suspects" have been covered but still no luck. The topology is a two-node active/passive with only one network-interface (it is a test-setup). The application running is SAP with DB/2 as database. We do not use SmartAssists or other gadgets.
... (8 Replies)
Hi Guys,
I have two databases where I copy archivelog files from server A to server B frequently...yesterday we did the VM upgrade now...I am struggling to copy/ship the files from server A to server B...
I manually tested the file transfer but the big files, e.g 46M, stall. I can copy small... (2 Replies)
Hi everybody,
I am running a program on a supercomputer via my personal computer through a ssh connection. My program take more than a day to run, so when I left work with my PC I stop the connection with the supercomputer and the program stop.
I am wondering if someone know how I can manage... (2 Replies)
I want to run applet on AIX 6 machine.
I already have setup $DISPLAY variable for putty session by selecting X11 option.
I got below error for any X related commands (xclock, X, applet viewer )
X connection to localhost:10.0 broken (explicit kill or server shutdown). Please can anyone... (0 Replies)
It is a long time since I have used HACMP so I suppose I could be classed as a newbie! The cluster pair is running and I am trying to get the passive node to give me sensible information from the commmand above. However all I can get back is:
Can not get cluster information.
Check if clinfo... (4 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Hello
I'm facing the above problem while doing a performance run. I've a script which I'm launching from my windows desktop using mozilla. The script will invoke backend action on a Solaris host which in turn feeds the records to a driver located on a linux box(Cent OS).
What's happening is... (1 Reply)
Hi All,
We use tomcat web server and it will get terminated with below error:
connection to localhost:10.0 host broken (explicit kill or server shutdown)
Please let me know how to fix this error. (5 Replies)
Hello,
today I logged in on a remote machine via "ssh -X ..." and started a screen session. In this i started OpenOffice.org writer by writing "oowriter". After some time the connection got lost (The network here is quite unstable). Now I logged in again via "ssh -X ...". The screen session is... (1 Reply)
Ok i am running Linux, or rather was. I can not longer do anything. This was a dns server amoungst other things.
It will no longer boot.
I have used a startup disk, but how can i recover the OS?
I need help and urgently.
Please someone
thanks (3 Replies)