|
|
configuring nic card
|
|
VDEQ(1) General Commands Manual VDEQ(1) NAME
vdeq - Virtual Distributed Ethernet wrapper for QEMU/KVM virtual machines SYNOPSIS
vdeq qemu [ --mod octalmode ] QEMU_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] QEMU_OPTIONS vdeq kvm [ --mod octalmode ] KVM_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] KVM_OPTIONS vde{qemu_name} [ --mod octalmode ] QEMU_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] QEMU_OPTIONS OLD SYNOPSIS
vdeq qemu [ --mod octalmode ] [ -sock socketpath [ ,socketpath [ ,... ] ] ] [ qemu_args ] vde{qemu_name} [ -sock socketpath [ ,socketpath [ ,... ] ] ] [ qemu_args ] DESCRIPTION
vdeq is a wrapper to start a QEMU/KVM virtual machine connected to a VDE network. It uses the qemu/kvm -tun-fd parameter to set up the connection with a vde_switch. The command vdeq qemu -b c -hda=sampledisk starts a qemu machine which boots from the sampledisk image and has a ne2000 ethernet interface connected to the standard vde_switch. The command vdeq kvm -b c -hda=sampledisk starts a kvm machine which boots from the sampledisk image and has a ne2000 ethernet interface connected to the standard vde_switch. It is also possible to create symbolic links to the vdeq executable to have a simpler command. If the link has a name that begins with vde the remaining part of the name is taken as the qemu command. For example if vdeq is linked to vdeqemu: vdeqemu -b c -hda=sampledisk starts qemu as above. If vdeq is linked to vdekvm: vdekvm -b c -hda=sampledisk starts kvm with the same parameters. The new syntax is consistent with the new Qemu 0.8.0 network parameters. Using vdeq is possible to specify a vde interface in the same way as user,tap or socket interfaces. The sock= parameter can be used to use a specific socket. Please note that what qemu names as vlan is not related to the 802.1q VLAN managed by the vde_switch. port= can be used to specify the port of the switch, otherwise the first allo- catable port is assigned. The following command run a qemu VM with two ethernet interface connected to the standard switch and to the switch with local socket "/tmp/my.ctl", port 10, respectively vde qemu -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10 vdeqemu -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10 The following command run a kvm VM with two ethernet interface connected to the standard switch and to the switch with local socket "/tmp/my.ctl", port 10, respectively vde kvm -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10 vdekvm -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10 The old syntax can be used with Qemu 0.8.0 but all the vde interfaces are assigned to vlan 0. vdeq qemu -sock /tmp/vde.ctl,/tmp/my.ctl -b c -hda=sampledisk vdeqemu -sock /tmp/vde.ctl,/tmp/my.ctl -b c -hda=sampledisk both start qemu with one ethernet interface connected both to the standard switch and to the switch with local socket "/tmp/my.ctl". OPTIONS
--mod octalmode, specify the mode for comm socket. -sock socketpath, specify the UNIX socket to be used by local programs for joining the VDE. The default value is "/tmp/vde.ctl" It is also possible to indicate several socketpath (comma separated, no blanks): in this case several interfaces are defined. The first socketpath is connected to the first ne2k interface and so on. -h, -help, --help print a Usage help. NOTE
Qemu has changed its syntax for networking (cvs Nov.15 2005). As a temporary solution use vdeoq and vdeoqemu instead of vdeq and vdeqemu if you are running a qemu with the old syntax. By default qemu uses the same MAC address for every virtual machine, so if you plan to use several instances of qemu be sure to explicitly set a different MAC address for each virtual machine. While generating your address beware to not use broadcast/multicast reserved MACs, ethernet rules say: the multicast bit is the low-order bit of the first byte, which is "the first bit on the wire". For example 34:12:de:ad:be:ef is an unicast address, 35:12:de:ad:be:ef is a multicast address (see ETHERNET MULTICAST ADDRESSES section in http://www.iana.org/assignments/ethernet-numbers for more informations). NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies"). SEE ALSO
vde_switch(1), vde_plug(1), vde_plug2tap(1), dpipe(1). AUTHOR
VDE is a project by Renzo Davoli <renzo@cs.unibo.it> Virtual Distributed Ethernet December 6, 2006 VDEQ(1)
