Login or Register to Ask a Question and Join Our Community


HP-UX

Mounting LUN on HP 11.31

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems HP-UX Mounting LUN on HP 11.31
# 1  
Old 04-28-2011
Mounting LUN on HP 11.31
Hello,
I want monting a LUN on a RX2660
I have created a LUN of 100Go with HP StorageWorks EVA and associated to my server.
For the moment I see it with the command below but after i can't used it
Code:
[root@HPX-1 /opt]#  ioscan -fnkC disk  
Class     I  H/W Path     Driver S/W State   H/W Type     Description  
=====================================================================  
disk      0  0/1/1/0.0.0.0.0        sdisk   CLAIMED     DEVICE       HP      IR Volume  
                         /dev/dsk/c16t0d0     /dev/dsk/c16t0d0s2   /dev/rdsk/c16t0d0    /dev/rdsk/c16t0d0s2  
                         /dev/dsk/c16t0d0s1   /dev/dsk/c16t0d0s3   /dev/rdsk/c16t0d0s1  /dev/rdsk/c16t0d0s3  
disk      4  0/4/1/0.10.9.0.0.0.1   sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c5t0d1   /dev/rdsk/c5t0d1  
disk      7  0/4/1/0.10.10.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c3t0d1   /dev/rdsk/c3t0d1  
disk      6  0/4/1/0.10.12.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c1t0d1   /dev/rdsk/c1t0d1  
disk      5  0/4/1/0.10.14.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c7t0d1   /dev/rdsk/c7t0d1  
disk      8  0/4/1/1.20.9.0.0.0.1   sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c15t0d1   /dev/rdsk/c15t0d1  
disk     11  0/4/1/1.20.10.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c11t0d1   /dev/rdsk/c11t0d1  
disk     10  0/4/1/1.20.12.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c9t0d1   /dev/rdsk/c9t0d1  
disk      9  0/4/1/1.20.14.0.0.0.1  sdisk   CLAIMED     DEVICE       HP      HSV400  
                         /dev/dsk/c13t0d1   /dev/rdsk/c13t0d1  
disk      2  255/1/0.0.0  sdisk   CLAIMED     DEVICE       TEAC    DV-28E-N  
                         /dev/dsk/c17t0d0   /dev/rdsk/c17t0d0  
[root@HPX-1 /opt]#

Help please !
Last edited by Scott; 04-28-2011 at 03:33 PM.. Reason: Please use code tags
# 2  
Old 04-28-2011
For new LUN's presented to the host, loose the -k part in ioscan

Code:
          -k                Scan kernel I/O system data structures instead
                             of the actual hardware and list the results.
                             No binding or unbinding of drivers is
                             performed.  The -d, -C, -I, and -H options can
                             be used to restrict listings.  Cannot be used
                             with -u

Please check man iostat.

After that you should be able to see new LUN's and use them,
also, -k switch will now show them without rescanning of hardware.
This User Gave Thanks to Peasant For This Post:
letters
# 3  
Old 04-28-2011
I already try ioscan with -k but when i type "mount" I don't see my share

I have to pool all partitions in one HSV400 and after i think mounting le /dev/XXX for example.
Last edited by letters; 04-28-2011 at 11:18 AM..
# 4  
Old 04-28-2011
without -k, ioscan will scan to detect from new presented LUN.
Is disk is not seen and dsf not not created run
Code:
insf -e

After then you can use pvcreate etc.
Further configuration depends if you are using LVM, which, etc.

HPUX v3 it is no longer using dsf's as in v2.
Is this system upgraded from v2 ?
# 5  
Old 05-01-2011
Well, why using options? Can you please do a plain ioscan?

#ioscan
#insf -eC disk

Check if the luns are showing up. If yes, put them in LVM and start playing. If no, it means that there is some issue and the HPUX is not seeing it. Perhaps, you need to check your HBA (#fcmsutil), Zoning on Switch, and a EVA.

Just you are saying 11.31, can you also do a # ioscan -m dsf ?

That should show you the mapping as to which goes where!

-DB
# 6  
Old 05-02-2011
All is good ! thanks for all
# 7  
Old 06-06-2011
Re-Hello,

I have another problem : i want to mount the same Lun on 2 different servers and at the end I have 2 different mounted points !
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

Not getting Lun Id

Hi, I am not getiting lun id information on VIO Server. I have used the command fget_config command. just showing # prompt. I would like know wheather any other command is there equiv of fget_config which will display lun id? (4 Replies)
Discussion started by: manoj.solaris
4 Replies

2. Emergency UNIX and Linux Support

Reuse a LUN

I have a LUN (From HP-Storage VA7110) that is claimed on 2 servers, but is in used in one of the VG on Server-1 . Now I want to shut Server-1 and re-use that LUN on server-2 . Server-1 Path-1 : /dev/rdsk/c4t0d1 Path-2: /dev/rdsk/c6t0d1 Server-2 Path-1: /dev/rdsk/c5t0d1 Path-2:... (8 Replies)
Discussion started by: Shirishlnx
8 Replies

3. Red Hat

Detect the lun

Hi, Is there command to detect the newly added LUN is linux box. I tried with below commands, but that doesn't work out. fdisk -l, fdisk -l | grep Disk pvscan (5 Replies)
Discussion started by: gsiva
5 Replies

4. Red Hat

How to configure LUN

Hi ALL, what are the steps to detect and configure a new attached lun in RHEL 5.3. rgds, snj. (2 Replies)
Discussion started by: snjksh
2 Replies

5. AIX

LUN Behavior

Aix 6.1, working with a nim master and nim_altmaster both LPARS have access to the same data LUN, /nimdisk I do realize the risks of having 2 servers access the same LUN, however it serves the purpose of being able to restore mksysb's to/from our DR site if necessary, at least in theory ;) ... (3 Replies)
Discussion started by: mshilling
3 Replies

6. AIX

Expand LUN

Hello all, I have the following env: * DS4300 storage SAN * AIX 5.3 Lpar (storage through vio server) * AIX 5.3 Server Some FS are too small do I'm setting up a process to increase the size of the FS. To expand the size of the FS I plan to do the following for the physical AIX server,... (1 Reply)
Discussion started by: petervg
1 Replies

7. Solaris

I have LUN ID, how to find disk relate to that LUN ID?

I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer. thanks (4 Replies)
Discussion started by: uuontario
4 Replies

8. Solaris

LUN not ready

hey guys i got this in my logs what does this mean: (1 Reply)
Discussion started by: sbn
1 Replies

9. UNIX for Dummies Questions & Answers

LUN mapping

Hi, We recently purchased a 3 tb RAID. In the setup, it created 2 slices, one 2 tb and one 1 tb slice. Right now only the 2 tb slice is visible when booting up. I was told that the second slice needs to be mapped to a lun and a port like the first slice is. Does anyone know how I would go... (1 Reply)
Discussion started by: user23
1 Replies

10. Red Hat

How get more LUN info

Hello, I'm trying to help a guy out on a VMWARE server, running what looks like a cut down version of redhat? 2.4.9-vmnix2 ... Bascially the box serves vm clients via allocating a LUN from a SAN.. to cut a long story short, I need to find out which SAN the luns are comming from (could be 1... (0 Replies)
Discussion started by: itsupplies
0 Replies
Login or Register to Ask a Question