Hello,
I want monting a LUN on a RX2660
I have created a LUN of 100Go with HP StorageWorks EVA and associated to my server.
For the moment I see it with the command below but after i can't used it
Help please !
Last edited by Scott; 04-28-2011 at 03:33 PM..
Reason: Please use code tags
Hello,
I'm trying to help a guy out on a VMWARE server, running what looks like a cut down version of redhat? 2.4.9-vmnix2 ...
Bascially the box serves vm clients via allocating a LUN from a SAN.. to cut a long story short, I need to find out which SAN the luns are comming from (could be 1... (0 Replies)
Hi,
We recently purchased a 3 tb RAID. In the setup, it created 2 slices, one 2 tb and one 1 tb slice. Right now only the 2 tb slice is visible when booting up. I was told that the second slice needs to be mapped to a lun and a port like the first slice is.
Does anyone know how I would go... (1 Reply)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hello all,
I have the following env:
* DS4300 storage SAN
* AIX 5.3 Lpar (storage through vio server)
* AIX 5.3 Server
Some FS are too small do I'm setting up a process to increase the size of the FS.
To expand the size of the FS I plan to do the following for the physical AIX server,... (1 Reply)
Aix 6.1, working with a nim master and nim_altmaster
both LPARS have access to the same data LUN, /nimdisk
I do realize the risks of having 2 servers access the same LUN, however it serves the purpose of being able to restore mksysb's to/from our DR site if necessary, at least in theory ;)
... (3 Replies)
Hi,
Is there command to detect the newly added LUN is linux box. I tried with below commands, but that doesn't work out.
fdisk -l,
fdisk -l | grep Disk
pvscan (5 Replies)
I have a LUN (From HP-Storage VA7110) that is claimed on 2 servers, but is in used in one of the VG on Server-1 .
Now I want to shut Server-1 and re-use that LUN on server-2 .
Server-1
Path-1 : /dev/rdsk/c4t0d1
Path-2: /dev/rdsk/c6t0d1
Server-2
Path-1: /dev/rdsk/c5t0d1
Path-2:... (8 Replies)
Hi,
I am not getiting lun id information on VIO Server. I have used the command fget_config command.
just showing # prompt.
I would like know wheather any other command is there equiv of fget_config
which will display lun id? (4 Replies)
Discussion started by: manoj.solaris
4 Replies
LEARN ABOUT DEBIAN
sg_rdac
SG_RDAC(8) SG3_UTILS SG_RDAC(8)NAME
sg_rdac - Display or Modify RDAC Redundant Controller Page
SYNOPSIS
sg_rdac [-a] [-f=LUN] [-v] [-V] DEVICE
DESCRIPTION
sg_rdac displays or modifies the RDAC controller settings via the Redundant Controller Page (0x2C). When modifying the settings it allows
to transfer the ownership of individual drives to the controller the command was received on.
OPTIONS -a Transfer all (visible) devices
-f=LUN Transfer the device identified by LUN. This command will only work if the controller supports 'Dual Active Mode' (aka active/active
mode).
-v be verbose
-V print version string then exit
EXIT STATUS
The exit status of sg_rdac is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHOR
Written by Hannes Reinecke <hare at suse dot com>, based on sg_emc_trespass.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2006-2007 Hannes Reinecke, Douglas Gilbert.
This software is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
sg3_utils-1.23 January 2007 SG_RDAC(8)