I want a LUN of 100Go shared with 2 servers (SRV-1 and SRV-2)
I used StorageWorks Command View EVA
I created a Virtual disk of 100Go (Data) and i presented this LUN to 2 servers
in Vdisk Properties -> Presentation -> I see my Vdisk for SRV-1 and SRV-2
You will run
That will show you the device special name(s) created for that LUN(S).
Now, you should use volume groups, not mount it.
Notice, if you are using multipath, it automatically discovered, so difference from v2 is that you add only one DSF, the persistent one for SAN redundancy.
Please check LVM HPUX documentation.
In specific cases you let database take care of it, since it can sometimes yield better performance.
That setup is well documented and varies from DB to DB.
You will not see data if you are not using clustered filesystem or similar i belive, but haven't personaly used or made any such setup to advise further.
Hi,
I am not getiting lun id information on VIO Server. I have used the command fget_config command.
just showing # prompt.
I would like know wheather any other command is there equiv of fget_config
which will display lun id? (4 Replies)
I have a LUN (From HP-Storage VA7110) that is claimed on 2 servers, but is in used in one of the VG on Server-1 .
Now I want to shut Server-1 and re-use that LUN on server-2 .
Server-1
Path-1 : /dev/rdsk/c4t0d1
Path-2: /dev/rdsk/c6t0d1
Server-2
Path-1: /dev/rdsk/c5t0d1
Path-2:... (8 Replies)
Hi,
Is there command to detect the newly added LUN is linux box. I tried with below commands, but that doesn't work out.
fdisk -l,
fdisk -l | grep Disk
pvscan (5 Replies)
Aix 6.1, working with a nim master and nim_altmaster
both LPARS have access to the same data LUN, /nimdisk
I do realize the risks of having 2 servers access the same LUN, however it serves the purpose of being able to restore mksysb's to/from our DR site if necessary, at least in theory ;)
... (3 Replies)
Hello all,
I have the following env:
* DS4300 storage SAN
* AIX 5.3 Lpar (storage through vio server)
* AIX 5.3 Server
Some FS are too small do I'm setting up a process to increase the size of the FS.
To expand the size of the FS I plan to do the following for the physical AIX server,... (1 Reply)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hi,
We recently purchased a 3 tb RAID. In the setup, it created 2 slices, one 2 tb and one 1 tb slice. Right now only the 2 tb slice is visible when booting up. I was told that the second slice needs to be mapped to a lun and a port like the first slice is.
Does anyone know how I would go... (1 Reply)
Hello,
I'm trying to help a guy out on a VMWARE server, running what looks like a cut down version of redhat? 2.4.9-vmnix2 ...
Bascially the box serves vm clients via allocating a LUN from a SAN.. to cut a long story short, I need to find out which SAN the luns are comming from (could be 1... (0 Replies)