HP�s ProLiant DL120 G5 SATA Rack Server

3 More Discussions You Might Find Interesting

1. Hardware

Connect SATA Laptop HardDrive to Desktop SATA Slots

Hello everybody, I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors. The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my...

2. UNIX for Advanced & Expert Users

trying to setup a sata drive using a sata to scsi adaptor

trying to setup a sata drive using a sata to scsi adaptor I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't...

3. Red Hat

Installation problem in HP Proliant DL-380 G5 server

Dear Sir, I have one HP Proliant DL-380 G5 Server, i tried to install Redhat Enterprise Verison 4, when i am trying to install the linux operating system it is coming one error message your hard disk not found, we are using Serial Scsi harddisk 146 GB, array controller is p400. i would...

LEARN ABOUT NETBSD

aac

AAC(4)							   BSD Kernel Interfaces Manual 						    AAC(4)

NAME

     aac -- Adaptec AdvancedRAID Controller driver

SYNOPSIS

     aac* at pci? dev ? function ?
     ld* at aac? unit ?

DESCRIPTION

     The aac driver provides support for the Adaptec AAC family of SCSI and SATA RAID controllers.  These controllers support RAID 0, 1, 5, 10,
     and volume sets.  They have four channels in the add-in version or 1-2 channels in the motherboard integrated version, and are most often
     found rebadged by Dell, Hewlett-Packard or IBM.  Supported controllers include:

     o	 Adaptec AAC-364
     o	 Adaptec SCSI RAID 2120S
     o	 Adaptec SCSI RAID 2200S
     o	 Adaptec SATA RAID 2410SA
     o	 Adaptec SATA RAID 3405
     o	 Adaptec SCSI RAID 5400S
     o	 Dell PERC 2/Si
     o	 Dell PERC 2/QC
     o	 Dell PERC 3/Di
     o	 Dell PERC 3/Si
     o	 Dell PERC 320/DC
     o	 Dell CERC SATA RAID 1.5/6ch
     o	 HP NetRAID 4M
     o	 HP ML110 G2 (Adaptec SATA RAID 2610SA)
     o	 IBM ServeRAID 8k

     Access to RAID containers is available via the ld device driver.  Individual drives cannot be accessed unless they are part of a container or
     volume set, and non-fixed disks cannot be accessed.  Containers can be configured by using the on-board BIOS utility of the card.

DIAGNOSTICS

     The adapter can send status and alert messages asynchronously to the driver.  These messages are printed on the system console.

SEE ALSO

     intro(4), ld(4)

HISTORY

     The aac driver first appeared in NetBSD 1.6, and was based on the FreeBSD driver of the same name.

BUGS

     This driver is not compatible with controllers that have version 1.x firmware.  The firmware version is the same as the kernel version
     printed in the BIOS POST and driver attach messages.

BSD
								 February 19, 2011							       BSD

HP Server News and Podcasts RSS