Login or Register to Ask a Question and Join Our Community


Hardware

3ware RAID server

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums Hardware 3ware RAID server
# 1  
Old 05-08-2012
3ware RAID server
We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the primary OS drive has me concerned. The raw_read_error_rate is currently at 65537, whereas the rest of the drives have a value of 0.

The OS has 2 400GB drives in RAID-1, and the rest of the drives are RAID-5.

A couple of questions I have are:
1. Should the drive be replaced, even though the last 21 test have returned no error?
2. Can the server be booted from the mirror drive in order to rebuild the primary drive?

Many thanks
Last edited by Krendoshazin; 05-08-2012 at 09:38 AM.. Reason: Forum screwed up post
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. SCO

Backup/RAID of HD on Old UNIX Server

I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company. I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could... (21 Replies)
Discussion started by: chrishouse
21 Replies

2. Debian

Best RAID settings for Debian Server? Help!! (1+0 or 5 or NAS)

I am installing a Debian Server on a: HP Proliant DL380 G4 Dual CPU's 3.20 ghz / 800 mhz / 1MB L2 5120 MB RAM 6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each) I will be using this server to capture VHS video, encode, compress, cut, edit, make DVD's, rip... (0 Replies)
Discussion started by: Marcus Aurelius
0 Replies

3. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

4. Linux

Help Setting up Linux Raid Server

I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it. The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically. I installed Windows first to see if... (2 Replies)
Discussion started by: lorewap3
2 Replies

5. Hardware

Raid 0 on database server

Hi guys. if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies

6. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies

7. UNIX for Dummies Questions & Answers

efficient raid file server

I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years. I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd... (2 Replies)
Discussion started by: pcmacd
2 Replies

8. Red Hat

linux server with raid controller card

I am planning on building a fedora box with raid controller (database server). Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Discussion started by: amir07
1 Replies

9. Filesystems, Disks and Memory

Adding RAID to server

Hi, I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690. When the RAID is attached, it boots up and says the following: Controller Bus #00, Device#1F, Function#02: 00 Ports No device found AHCI BIOS not... (0 Replies)
Discussion started by: user23
0 Replies

10. Filesystems, Disks and Memory

2-Ch RAID Problem in SCO Open Server

Help, if possible. In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than... (1 Reply)
Discussion started by: pko60
1 Replies
Login or Register to Ask a Question

LEARN ABOUT NETBSD

aac

AAC(4)							   BSD Kernel Interfaces Manual 						    AAC(4)

NAME

     aac -- Adaptec AdvancedRAID Controller driver

SYNOPSIS

     aac* at pci? dev ? function ?
     ld* at aac? unit ?

DESCRIPTION

     The aac driver provides support for the Adaptec AAC family of SCSI and SATA RAID controllers.  These controllers support RAID 0, 1, 5, 10,
     and volume sets.  They have four channels in the add-in version or 1-2 channels in the motherboard integrated version, and are most often
     found rebadged by Dell, Hewlett-Packard or IBM.  Supported controllers include:

     o	 Adaptec AAC-364
     o	 Adaptec SCSI RAID 2120S
     o	 Adaptec SCSI RAID 2200S
     o	 Adaptec SATA RAID 2410SA
     o	 Adaptec SATA RAID 3405
     o	 Adaptec SCSI RAID 5400S
     o	 Dell PERC 2/Si
     o	 Dell PERC 2/QC
     o	 Dell PERC 3/Di
     o	 Dell PERC 3/Si
     o	 Dell PERC 320/DC
     o	 Dell CERC SATA RAID 1.5/6ch
     o	 HP NetRAID 4M
     o	 HP ML110 G2 (Adaptec SATA RAID 2610SA)
     o	 IBM ServeRAID 8k

     Access to RAID containers is available via the ld device driver.  Individual drives cannot be accessed unless they are part of a container or
     volume set, and non-fixed disks cannot be accessed.  Containers can be configured by using the on-board BIOS utility of the card.

DIAGNOSTICS

     The adapter can send status and alert messages asynchronously to the driver.  These messages are printed on the system console.

SEE ALSO

     intro(4), ld(4)

HISTORY

     The aac driver first appeared in NetBSD 1.6, and was based on the FreeBSD driver of the same name.

BUGS

     This driver is not compatible with controllers that have version 1.x firmware.  The firmware version is the same as the kernel version
     printed in the BIOS POST and driver attach messages.

BSD
								 February 19, 2011							       BSD