Raid With Suse Linux

3 More Discussions You Might Find Interesting

1. Linux

RAID on Linux

Dear All, I have a linux Server having a single disk /dev/sda and two partitions /dev/sda1 and /dev/sda2. Up on which a Logical Volume is created for root partition. Now the task is I need to implement RAID on this machine , namely RAID 1. Kindly clarify whether i can directly go and...

2. Filesystems, Disks and Memory

RAID Problem on SUSE 11.0

I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into...

3. Filesystems, Disks and Memory

IDE controlled / RAID card issue Suse 9.2

I just built a new box to run Suse, and I guess I shoud have spent more time researching the HCL. Anyway, the Promise RAID card I have will not work, and I am unable to install the OS. The only other IDE devide in the box is a DVDOM. I can only think of 2 options, but would appreciate some...

LEARN ABOUT DEBIAN

mpt

MPT(4)							   BSD Kernel Interfaces Manual 						    MPT(4)

NAME

     mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device mpt

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   mpt_load="YES"

DESCRIPTION

     The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers.

HARDWARE

     The following controllers are supported by the mpt driver:

     o	 LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
     o	 LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
     o	 LSI Logic FC909 (1Gb/s Fibre Channel)
     o	 LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
     o	 LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
     o	 LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
     o	 LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
     o	 LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)

     The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including:

     o	 Dell PowerEdge 1750 thru 2850
     o	 IBM eServer xSeries 335

     These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports.

     The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100.  Note that this controller can drive both
     SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at
     best.

     The Fibre Channel controller chipset are supported by a broad variety of speeds and systems.  The Apple Fibre Channel HBA is in fact the
     FC949ES card.

     This driver also supports target mode for Fibre Channel cards.  This support may be enabled by setting the desired role of the core via the
     LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.

SEE ALSO

     cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8)

     LSI Logic Website, http://www.lsilogic.com/.

HISTORY

     The mpt driver first appeared in FreeBSD 4.6.

AUTHORS

     The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.

     Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements.

BUGS

BSD
								   May 13, 2010 							       BSD

Filesystems, Disks and Memory