internal disk and external disk question

10 More Discussions You Might Find Interesting

1. Hardware

Unrecognized disk label on my external HD

Hi everyone, I have an external hard drive and I accidentally deleted the partition table. Can I restore my files? If I try to run the f-disk command this is what it says Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units =...

2. Red Hat

Disk in Linux machine are internal or external

How to check whether the disk in linux machine are internal or external ( from nas or san). How to identify internal(local) and external disks. Following are some details of my server. Thanks. #df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 15G 3.5G 10G...

3. Red Hat

Installation RHEL in External hard disk.

Hi all. Can i install RHEl5 in a external hard disk, work on lenovo T60 laptop. Plz reply me. Tell me the process.

4. Hardware

Unrecognized disk label of a external HD

I have a external HD that I can't seem to open. When I try to open it with gparted it says unrecognized disk. When I run gparted from the terminal this is what it says. ~ $ sudo gparted ====================== libparted : 2.2 ====================== /dev/sdb: unrecognised disk label When I...

5. Linux

External disk

Hi, I connected a external hard disk to my linux machine(Redhat 5) and shared the external hard disk by using NFS. The problem is hard disk becoming read-only file system after some time, could some one please tell me the reason for it. I created two partitions with ext3 filesystem in...

6. AIX

Remove internal disk from Veritas Control

I installed new internal disks in my p570. They will be part of a new AIX vg. Unfortunately, we have Veritas Volume Manager running on this AIX 5.2 ml 10 box. Veritas has grabbed control of the disks. I want AIX LVM to control the disks. I cannot get these disks free of Veritas: <lspv...

7. Solaris

Sunfire V880 Internal Disk Problem

Any help on this would be greatly appreciated. I have read other threads on similar subject but still not clear on what this is telling me and what action to take. Do I have a couple of disks that are slowly dying? While checking disk usage on the V880 I noticed the following: # format...

8. SuSE

External USB disk cannot be mounted

Hi, I am running Suse on a fujitsu server. The problem is that it will no fully load the usb external disk. When plugged in, dmesg shows that indeed a usb disk has been plugged in ,but gives no devpath e.g sda,sdb. lsusb shows the disk vendor (western digital) but nothing else.Whats goin on...

9. UNIX for Dummies Questions & Answers

backup disk to disk to tape question

Hi all I had started to learn how to backup disk to disk to tape method Firstly I had backup to my NAS tar czvf /MyNetworkStorge/backup.tar /home Secondly I using dd command to copy the tar to tape dd if=/MyNetworkStorge/backup.tar of=/dev/tape0 But the tape drive always hang....

10. HP-UX

Can't access external disk after reboot

Hi, I have an HP RX4640 running HP-UX 11iv3 with two internal disks and its connected to a HP disk system 2400 with fibre cable. If the storage system is online before the server is on then the server can't find the disks. And I get the following error messages: vgchange: Warning: Couldn't...

LEARN ABOUT CENTOS

mkqdisk

mkqdisk(8)						      Quorum Disk Management							mkqdisk(8)

NAME

       mkqdisk - Cluster Quorum Disk Utility

WARNING

       Use of this command can cause the cluster to malfunction.

SYNOPSIS

       mkqdisk [-?|-h] | [-L] | [-f label] [-c device  -l label] [-d [-d ...]]

DESCRIPTION

       The mkqdisk command is used to create a new quorum disk or display existing quorum disks accessible from a given cluster node.

OPTIONS

       -c device -l label
	      Initialize  a new cluster quorum disk.  This will destroy all data on the given device.  If a cluster is currently using that device
	      as a quorum disk, the entire cluster will malfunction.  Do not run this on an active cluster  when  qdiskd  is  running.	 Only  one
	      device  on  the  SAN should ever have the given label; using multiple different devices is currently not supported (it is expected a
	      RAID array is used for quorum disk redundancy).  The label can be any textual string up to 127 characters - and is therefore  enough
	      space to hold a UUID created with uuidgen(1).

       -f label
	      Find the cluster quorum disk with the given label and display information about it.

       -L     Display information on all accessible cluster quorum disks.

       -d     Increase debugging level.  Specify multiple times for more information.  Currently, specifying more than twice has no effect.

SEE ALSO

       qdisk(5), qdiskd(8), uuidgen(1)

								     July 2006								mkqdisk(8)

Filesystems, Disks and Memory