8 More Discussions You Might Find Interesting
1. AIX
Hi
My P6 server is with dual vio servers. From the below output we could see that cd devices(cd0 and cd1) has been mapped to the vio client named prdsapfi1.
When we execute "lsdev -Cc cdrom" in prdsapfi1 there are 2 cd devices named cd0 and cd1 showing up in available state.
... (1 Reply)
Discussion started by: newtoaixos
1 Replies
2. Red Hat
hello,
someone gave me a set of electronic gadgets 'Brookstone' which has mini optical mouse. This mouse label doesn't have model or etc. Mouse does not work properly i.e. pointer is moving right but left/right buttons work opposite and not always could open or close controls.
I suggest it might... (3 Replies)
Discussion started by: susja
3 Replies
3. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
4. Ubuntu
Hi to all,
I have the problem that a laptops with windows XP cannot startup even in safe mode nor using last good known configuration. I have a Ubuntu 10.10 Live CD and booting from it I can read the Hard Drive.
I need to do a backup the Hard Drive from XP laptop and I want to connect this... (5 Replies)
Discussion started by: cgkmal
5 Replies
5. Red Hat
I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable
Reboot with lan cable:
The hostname is ubunut
Unable to connect Oracle database using sqlplus some times database is not... (2 Replies)
Discussion started by: LinuxLearner
2 Replies
6. UNIX for Dummies Questions & Answers
We are trying to make duplicates of some Magneto Optical Disks that were created in Irix 6.5. The disks are 2.3 gig and the using a scsi MOD drive. Is there possbily a disk copy like in dos or some simple script to do this - any help appreciated.
Thanks (0 Replies)
Discussion started by: drew_holm
0 Replies
7. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
8. UNIX for Dummies Questions & Answers
Trying to get my unix system to recognize an optical drive, it was delivered to us, so we assumed it worked, in the 2 years since no one ever has used it, we want to now. However, even running probe-scsi-all doesn't bring up that drive. It's a scsi address of 3, at the end of the chain, all... (1 Reply)
Discussion started by: kymberm
1 Replies
LIEBERT(8) NUT Manual LIEBERT(8)
NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
