Quote:
Originally Posted by
kaldek
[...] So I have a pSeries "B80" in front of me running AIX 5.2 and the thing boots but won't give me a serial console. I can *see* stuff such as daemons starting, etc but at the very end of the boot process I get no console. The server has no IP address configuraion, has no video card and the guys who built it (who also know very little) from the rental company don't know what to do. [...]
AIX has login via the serial console disabled as a default. So you need both a suitable serial cable and to change some AIX settings. If you don't have an original IBM serial cable you might use a blue laplink one. Access the B80 with a VT100 Term configured at 9600-8-N-1. Start server, choose the right console by pressing the number that is displayed on your screen and then get into maintenance mode by pressing "5" after the word "keyboard" appears on the screen (if you don't see anything you got the wrong cable or chose the wrong console before). Then access a rootvg, start a shell and mount rootvg (writing from memory but these steps are being offerd by menu). When you got the root shell export TERM=vt100. Open SMIT, choose devices and then the TTY in question. Change the following parameters:
* enable LOGIN - enable (switch)
* STTY attributes for RUN time - clocal (add)
* STTY attributes for LOGIN - clocal (add)
* Apply changes to Database only - yes (set)
Exit smit and reboot. The server should come up and let you log in via the console.
One more hint: This description applies to the older workstation and standalone server Power technology. Steps for LPAR capable servers are slightly different as not every serial port of those machines may be used for login into the OS. Secondly baud rate of newer servers is higher.