Replaced pdisk not showing up in SAS Disk Array Configuration

10 More Discussions You Might Find Interesting

1. AIX

Power machine 720 SAS disk

Hello, I would like to check how many SAS disks and its size per disk for the whole power system. As per my understanding, if we assign the SAS controller to LPAR, then we can see the disk in lpar smitty command. How can we check from the Power machine(physical ones) as well? I think the...

2. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

3. Red Hat

Udev Rule TAG for identifying a local sas disk, non-scsi, non-fiber, non-iscsi

I need to add a VMware virtual disk to the 99-oracle-asmdevices.rules file but the OS is not assigning a WWID to the disk. It has been fdisk'd and a single partition created. What TAG inside the file needs to be added? the Program scsi-id does not work for some reason. latest patches...

4. Linux

Grub not loading from replaced disk

Hi, a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced. here is how I did that. 1) created identical partition table on the new disk. 2) attached the mirrors using md commands. The whole procedure is given below:...

5. Ubuntu

Linux LVM.. Grub not loading from replaced disk

6. UNIX for Dummies Questions & Answers

find physical disk type : SAS / SATA

Hi, Is there an easy way to find the disk-type from the command line or with another api ? sdparm works for SAS but not for SATA, hdparm works for SATA but not SAS. Thanks

7. Solaris

Veritas not attaching replaced disk

Hi, I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk: # vxdctl enable # vxdisk list c1t0d0s2 Device: c1t0d0s2 devicetag: c1t0d0 type: auto flags: online error private autoconfig...

8. AIX

add SSA pdisk to array to become hdisk

May I know how can I add a new SSA pdisk into array and become usable hdisk? I have inserted a 36GB SSA disk into enclosure and done the "cfgmgr" and I can see it already been regconized as pdisk47. I would like to make it a system disk in order for me to add to my volume group. Please let me...

9. Solaris

3320 Disk Array Configuration for Oracle 10

We have a dual-controller StorEdge 3320 disk array with 5 disks (each 320 MB). Four disks have been set up in a RAID-5 configuration with the remaining disk acting as a hot spare. There is a single logical drive which has been partitioned into 3 slices. The disk array is to be simultaneously...

10. Solaris

T5240 and Internal SAS RAID Configuration help

Dear Friends, I need to configure T5240 with Internal SAS RAID HBA(SG-XPCIESAS-R-INT-Z).. T5240 uses 8 hard disks... From the documents of RAID card I have found that I need to create a jump start server to include three packages SUNWaac, StorMan, SUNWgccruntime if Im using solaris10 5/08... ...

LEARN ABOUT OSF1

cfgmgr.auth

cfgmgr.auth(4)						     Kernel Interfaces Manual						    cfgmgr.auth(4)

NAME

       cfgmgr.auth - Configuration management server authorization database

SYNOPSIS

       /etc/cfgmgr.auth

DESCRIPTION

       The  cfgmgr.auth  file lists the remote systems that are authorized to modify the local system's kernel subsystem configuration.  Using the
       sysconfig command, system administrators can maintain the kernel subsystem configuration on local and remote hosts.  To	secure	access	to
       the  kernel  subsystem configuration, the local configuration management server (cfgmgr) answers requests from remote systems only when the
       remote system is listed in the cfgmgr.auth file.

       Each entry in the file has the following form:

       host-name

       Where host-name specifies the full domain name of the remote host.  You must list each remote host on a separate line and  only	the  first
       128 characters of each line are read and processed.  Lines beginning with the pound sign (#) are comments.

       If  the cfgmgr.auth file does not exist, the configuration management server assumes no remote system administrators are allowed to config-
       ure, reconfigure, or unconfigure any kernel subsystem on the local host.

EXAMPLES

       The following shows entries in the cfgmgr.auth file on a host named buster:

       salmon.zk3.dec.com
       trout.zk3.dec.com
       bluefish.zk3.dec.com

       This cfgmgr.auth file allows system administrators on the salmon, trout, and bluefish hosts to configure, reconfigure, and unconfigure sub-
       systems on buster.

RELATED INFORMATION

       Commands: cfgmgr(8), sysconfig(8), sysconfigdb(8), kloadsrv(8)

       Files:  /etc/sysconfigtab(4)

       System Administration delim off

																    cfgmgr.auth(4)

AIX