bosboot: Boot image is 22995 512 byte blocks.

10 More Discussions You Might Find Interesting

1. AIX

Boot image for VIO

i've installed vios 2.2 on blade PS700 there are 2 disk, hdisk0 dan hdisk1 and i want to mirror it but blv (boot logic volume) does not appear on hdisk1 (bootlist -mode normal -ls) only on hdisk0 i've already did command (bootlist -mode normal hdisk0 hdisk1" does anyone know the command to...

2. Hardware

How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?

I have a 320 GB drive which dual boots Windows and Debian: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):...

3. Shell Programming and Scripting

how to split this file into blocks and then send these blocks as input to the tool called Yices?

Hello, I have a file like this: FILE.TXT: (define argc :: int) (assert ( > argc 1)) (assert ( = argc 1)) <check> # (define c :: float) (assert ( > c 0)) (assert ( = c 0)) <check> # now, i want to separate each block('#' is the delimeter), make them separate files, and then send them as...

4. UNIX for Dummies Questions & Answers

Convert 512-blocks to 4k blocks

I'm Unix. I'm looking at "df" on Unix now and below is an example. It's lists the filesystems out in 512-blocks, I need this in 4k blocks. Is there a way to do this in Unix or do I manually convert and how? So for container 1 there is 7,340,032 in size in 512-blocks. What would the 4k block be...

5. UNIX for Advanced & Expert Users

Making one binary image containing boot loader and linux

Hi, I want to have one binary image that contains both my boot loader as well as the OS(linux) image at pre defined offsets which i can use to program flash . Can anyone help in this direction? Regards Subrata

6. Filesystems, Disks and Memory

Boot Sequence changed After Image Restore

Hello All, I backed up my RHEL 4 as an image. Then I restored the image on my machine. Everything went fine but I dont get the normal boot sequence as it used to come when I freshly installed RHEL4. The messages that are shown when the system boots are something like- " ..... EXT3-fs:...

7. Red Hat

redhat xen will not boot winXP cdrom image

I'm running redhat linux: 2.6.18-128.1.6.el5xen #1 SMP Tue Mar 24 12:28:27 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux as my Dom0. I have several other DomU's running on this system, but for this test I've shut them down. I'm attempting to boot winXP from an image. Here is my config file: #...

8. AIX

has bosboot command changed characteristics of boot image?

hi all i just found one of my p650 server showing a warning message when i tried to run bosboot command after upgrading TL to AIX 530803. i also tried to run chpv -c hdisk0 and chpv -c hdisk1 to clear out the old boot info in hdisk0 and hdisk1 and rerun bosboot -a. it still showed...

9. AIX

mksysb and boot.image

hello i saved my system this morning, mksysb tape, and i have the message: "boot.image exceeded the size....." i have not the end because the message is disappeared. where can i find the mksysb message in a log ? the message is scary ? thank you

10. Filesystems, Disks and Memory

Boot Diskette Image

Where can I find the boot floppy disk image file(*.vfd)of SCO UNIX 5.0.5?:confused:

LEARN ABOUT DEBIAN

recovermov

RECOVERMOV(1)							   User Commands						     RECOVERMOV(1)

NAME

       recovermov - recover movies from a filesystem image

SYNOPSIS

       recovermov [options] device

DESCRIPTION

       Recovermov  tries  to  identify mov movies from a filesystem image. To achieve this goal, it scans the filesystem image and looks for a mov
       structure at blocks starting at 512 bytes boundaries.

OPTIONS

       -h     Display an help message.

       -b blocksize
	      Set the size of blocks in bytes. On most file systems, setting it to 512 (the default) will work fine as	any  large  file  will	be
	      stored  on 512 bytes boundaries. Setting it to 1 maximize the chances of finding very small files if the filesystems aggregates them
	      (UFS for example) at the expense of a much longer running time.

       -i integerindex
	      Set the initial index value for image numbering (default: 0).

       -n basename
	      Basename to use to create the salvaged files. Default is video_.

	      All the sizes may be suffixed by a k, m or g letter to indicate KiB, MiB or GiB. For  example,  6m  correspond  to  6  MiB  (6291456
	      bytes).

EXAMPLES

       Recover as many movies as possible from the memory card located in /dev/sdc:

	 recovermov /dev/sdc

       Recover	as  many  movies  as  possible from a crashed ReiserFS file system (which does not necessarily store files at block boundaries) in
       /dev/hdb1:

	 recovermov -b 1 /dev/hdb1

AUTHOR

       Recovermov has been written by Jan Funke <jan.funke@inf.tu-dresden.de>.

COPYRIGHT

       Copyright (c) 2010 Jan Funke <jan.funke@inf.tu-dresden.de>.  This is free software; see the source for copying conditions. There is NO war-
       ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SEE ALSO

       recoverjpeg(1)

recovermov							   January 2010 						     RECOVERMOV(1)

AIX