bosboot: Boot image is 22995 512 byte blocks.

10 More Discussions You Might Find Interesting

1. AIX

Boot image for VIO

i've installed vios 2.2 on blade PS700 there are 2 disk, hdisk0 dan hdisk1 and i want to mirror it but blv (boot logic volume) does not appear on hdisk1 (bootlist -mode normal -ls) only on hdisk0 i've already did command (bootlist -mode normal hdisk0 hdisk1" does anyone know the command to...

2. Hardware

How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?

I have a 320 GB drive which dual boots Windows and Debian: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):...

3. Shell Programming and Scripting

how to split this file into blocks and then send these blocks as input to the tool called Yices?

Hello, I have a file like this: FILE.TXT: (define argc :: int) (assert ( > argc 1)) (assert ( = argc 1)) <check> # (define c :: float) (assert ( > c 0)) (assert ( = c 0)) <check> # now, i want to separate each block('#' is the delimeter), make them separate files, and then send them as...

4. UNIX for Dummies Questions & Answers

Convert 512-blocks to 4k blocks

I'm Unix. I'm looking at "df" on Unix now and below is an example. It's lists the filesystems out in 512-blocks, I need this in 4k blocks. Is there a way to do this in Unix or do I manually convert and how? So for container 1 there is 7,340,032 in size in 512-blocks. What would the 4k block be...

5. UNIX for Advanced & Expert Users

Making one binary image containing boot loader and linux

Hi, I want to have one binary image that contains both my boot loader as well as the OS(linux) image at pre defined offsets which i can use to program flash . Can anyone help in this direction? Regards Subrata

6. Filesystems, Disks and Memory

Boot Sequence changed After Image Restore

Hello All, I backed up my RHEL 4 as an image. Then I restored the image on my machine. Everything went fine but I dont get the normal boot sequence as it used to come when I freshly installed RHEL4. The messages that are shown when the system boots are something like- " ..... EXT3-fs:...

7. Red Hat

redhat xen will not boot winXP cdrom image

I'm running redhat linux: 2.6.18-128.1.6.el5xen #1 SMP Tue Mar 24 12:28:27 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux as my Dom0. I have several other DomU's running on this system, but for this test I've shut them down. I'm attempting to boot winXP from an image. Here is my config file: #...

8. AIX

has bosboot command changed characteristics of boot image?

hi all i just found one of my p650 server showing a warning message when i tried to run bosboot command after upgrading TL to AIX 530803. i also tried to run chpv -c hdisk0 and chpv -c hdisk1 to clear out the old boot info in hdisk0 and hdisk1 and rerun bosboot -a. it still showed...

9. AIX

mksysb and boot.image

hello i saved my system this morning, mksysb tape, and i have the message: "boot.image exceeded the size....." i have not the end because the message is disappeared. where can i find the mksysb message in a log ? the message is scary ? thank you

10. Filesystems, Disks and Memory

Boot Diskette Image

Where can I find the boot floppy disk image file(*.vfd)of SCO UNIX 5.0.5?:confused:

LEARN ABOUT DEBIAN

dds-dd

dds-dd(1)						      General Commands Manual							 dds-dd(1)

NAME

       dds-dd - tool to read a dds device.

SYNOPSIS

       dds-dd [ -f device ]

DESCRIPTION

       dds-dd  reads  a  dds  tape devices (DAT). Every block is read and written to stdout. A tape with unknown block size or blocks of different
       size can be read.

       The default device is /dev/rmt0, which may be overridden with the environment variable TAPE, which in  turn  may  be  overridden  with  the
       -f device option. The device must be a character special file.

OPTIONS

       -f device
	      Device of the tape archive (default is /dev/rmt0).  Must be a character special file connected to a dds tape device.

       -V,--version
	      Print the version number of mt-dds to stderr and exit immediately.

       --help print some screens of online help with examples through a pager and exit immediately.

EXAMPLES

       Example: Read the tape and make a listing:
		 dds-dd | tar ft -

       Example: Read the tape and make a listing:
		 dds-dd | cpio -it

ENVIRONMENT

       The environment variable TAPE overrides the default tape device /dev/rmt0.

       SEE ALSO
	      dds2tar(1), dds2index(1), mt(1), tar(1)

HISTORY

       This program was created to use it in conjunction with dds2tar.

AUTHOR

       J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409.  This software is available at ftp.uni-duesseldorf.de:/pub/unix/apollo

									2.4								 dds-dd(1)

AIX