So, how did you configure the IP (ent1 - 10.10.20.11)?
I assume you did
Now the question is, have you correctly feeded the subnet mask value?
Show me the subnet mask value from client and also from TSM server
You can get it by running ifconfig en1 ( if you want to grep netmask you can do so)
Value will be something like 0xffffff00 (this is an example)
Post the values from TSM server for 20.x network and also from client for 20.x network.
So, how did you configure the IP (ent1 - 10.10.20.11)?
I assume you did
Now the question is, have you correctly feeded the subnet mask value?
Show me the subnet mask value from client and also from TSM server
You can get it by running ifconfig en1 ( if you want to grep netmask you can do so)
Value will be something like 0xffffff00 (this is an example)
Post the values from TSM server for 20.x network and also from client for 20.x network.
yes I did there is nothing difficult in setting mask: 255.255.255.0
Ok,
Nothing more is coming to my mind now, at this point what I can say is
Add tsm server (20.x) to /etc/hosts file of client.
Make sure you follow the correct naming convention for both, if you go with default hostname it will try to connect using 10.10.10.x network.
Also, check what is the IP address of tsm server on client's dsm.sys file
You can find it under /usr/tivoli/tsm/client/ba/bin(64) earlier version it will be bin and later version it will be bin64
And look for TCPServeraddress in dsm.sys file
Run dsmc from client and see if it connecting to tsm server and you can do some queries q files
Some questions which might shed a bit more light on the issue:
- you said you use 2 physical NICs in your LPAR. There is an etherchannel formed of the two NICs. How are those NICs connected? Are there different switches, which VLANs are configured on the ports, etc..
- we have seen mixed data, once from a production server, once from a test server. If your procuction server is the one described in #8, having two interfaces "10.10.10.11" and "10.10.20.11" and your subnet masks are "255.255.255.0" then your routing for "en1" is definitely wrong. With a subnet mask of 24 bit your interface "10.10.20.11" is in the network range "10.10.20.0-255". In other words, your default gateway is not reachable from your second interface.
- in addition, your routing table in #8 shows two entries directing "10.10.10.11" and "10.10.20.11" over "127.0.0.1". What is that supposed to do? If these both would work (gladly they do not) you would effectively prohibiting any network traffic by directing any outgoing traffic to the loopback device.
Hello All,
I have a strange problem and I'm hoping someone can help. I honestly don't know where else to look.
I have a number of AIX boxes in my environment and for some reason I would periodically lose connectivity to all services (except ping) to one of my boxes. It happens sporadically... (2 Replies)
Hey,
would like to set udp_sendspace parameters in diferrent interface ent2 ent3 ent4 ,
no -p -o udp_sendspace=65536 just set on ent2 and
chdev -l ent3 -a udp_sendspace=65536 doesn't work
is that possible to set up this parameters by interface? (1 Reply)
Hi Al,
In course of understanding networking in Solaris, I have these doubts on Interfaces. Please clarify me. I have done fair research in this site and others but could not be clarified.
1. In the "ifconfig -a" command, I see many interfaces and their configurations. But I see many... (1 Reply)
Hi,
I have a task of setting up connectivity between Oracle 10g (AIX) and Mainframe (1 library). Went through couple of documents, forums, blogs etc. MY understanding is ODBC Generic Connectivity is free from Oracle side.
Question: (may be dumb to you)
1. Has anybody done this and would... (3 Replies)
Hi,
We have installed oracle on a AIX machine and when we try to connect to AIX machine from oracle client installed on a windows machine or do a telnet to AIX machine on 1521 port , it throws an error connection refused on port 1521 , where all the ports and firewalls are open from windows to... (2 Replies)
Hi Guys
Am new in UNIX environment I was asked by my boss to write a program that transfer files from the AIX server to the Wintel Server. I have written the program in C# windows which does almost the same thing. So how to run the C# program in UNIX? (1 Reply)
Hi Guys
Am new in UNIX environment I was asked by my boss to write a program that transfer files from the AIX server to the Wintel Server. I have written the program in C# windows which does almost the same thing. So how to run the C# program in UNIX? (1 Reply)
hi,
Can I listdown all available net interfaces on my system like SF4800 or Netra440.
I know there are 4 port physically present but I can't see or list them using either
sysdef -v
prtconf -vp
prtdiag -v
dladm
kstat
may be I'm missing switched on these or may some other command... (8 Replies)
I am having an issue while trying to run the Net::SFTP module. I have been able to install this on several machines before but have never had this problem. When I am running a simple script to test the sftp it dies but does not trigger the print statement for my error. The last line is in red.
... (0 Replies)