AIX Sanboot from EMC Symmetrix with NPIV


 
Thread Tools Search this Thread
Operating Systems AIX AIX Sanboot from EMC Symmetrix with NPIV
# 1  
Old 08-09-2011
AIX Sanboot from EMC Symmetrix with NPIV

Hi All..

On to a new implementation with AIX 7.1 san boot from EMC disks (Using NPIV). Anyone played with this recently?

Wondering if we need PowerPath on the AIX clients or has native MPIO matured to replace it. Thoughts?

Thanks

Mr B
# 2  
Old 08-09-2011
currently IBM still recommends to use vscsi SAN for boot disks (with native AIX mpio for root) and EMC SAN with EMC powerpath using NPIV. Works perfectly fine on AIX 5.3, 6.1 + 7.1 and p5/p6/p7 hardware
# 3  
Old 08-10-2011
MySQL

Thanks for the Response Zxmaus.

So a mixture of vscsi and npiv. Does EMC has any recomendations? We had a complete SAN boot environment over NetApp (using NPIV + Dotpaths + MPIO) and it works fine with p6 + aix 6.1. So bad if we can't achieve the same with EMC.

Balaji
# 4  
Old 08-15-2011
I have done Power 7 with AIX 6.1 SAN booting using EMC and Powerpath on numerous occasions and works fine. What issue you having?
# 5  
Old 08-15-2011
pwright - how are you planning to ever upgrade the powerpath software when you boot from it ?
# 6  
Old 08-15-2011
You can call a command 'pprootdev fix' which basically take the root disks out of controll of powerpath and allows you to use bosboot command which is required for the upgrade:

Server name:# lspv
hdisk0 none None
hdisk1 none None
hdisk2 none None
hdisk3 none None
hdisk4 none None
hdiskpower0 00c9899e41bb43a2 pagingvg active
hdisk8 none None
hdiskpower2 00c9899e41bb40f8 appvg active
hdiskpower3 00c9899e41bc1c90 nimvg active
hdisk6 none None
hdisk7 none None
hdiskpower1 00c9899e081b0d91 rootvg active
hdisk9 none None
hdisk10 none None
Server name:# pprootdev fix

bosboot: Boot image is 49340 512 byte blocks.
You may now run bosboot.
PowerPath boot remains enabled for the next system boot.
Server name :# lspv
hdisk0 none None
hdisk1 none None
hdisk2 00c9899e081b0d91 rootvg active
hdisk3 none None
hdisk4 none None
hdiskpower0 00c9899e41bb43a2 pagingvg active
hdisk8 00c9899e081b0d91 rootvg active
hdiskpower2 00c9899e41bb40f8 appvg active
hdiskpower3 00c9899e41bc1c90 nimvg active
hdisk6 none None
hdisk7 none None
hdiskpower1 none None
hdisk9 none None
hdisk10 none None
These 2 Users Gave Thanks to pwright84 For This Post:
# 7  
Old 09-01-2011
Thank you

pwright..thanks for the response.

We are about to do a new new project with AIX 7.1 on power7 (SAN boot with NPIV/PowerPath). Was wondering if anyone has already did that already.

Also is it still required just to have single path to LUN when installing AIX?
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

AIX help -reconnect EMC lun

we have an old AIX system with important data on an EMC LUN. the AIX server crashed and we had to rebuild it with the old AIX os 5.8. how do we reconnect the EMC LUN without losing the data? (15 Replies)
Discussion started by: jhudson12
15 Replies

2. AIX

AIX Migration issue with EMC ODM sets

Hi Experts , I want to start migrating our AIX 6.1 to AIX 7.1 . I am planning to use alt_disk_migration . Chris gibson has awesome documentation in the internet. However I am running into an issue with EMC odm filesets . So my current OS is AIX 6.1. and I have this : lslpp -l | grep EMC ... (7 Replies)
Discussion started by: JME2015
7 Replies

3. AIX

AIX san boot from EMC2 & NPIV

Hi all , we're implementing a new NPIV infrastructure with AIX san boot on EMC2 VMAX 5876 , for economic reason , they don't wont to install Powerpath multipath sw , but only ODM drivers from EMC2 , this behavior is supported and can work?! in the past we implemented NPIV on DS8000 family... (2 Replies)
Discussion started by: BabylonRocker76
2 Replies

4. AIX

Anyone using NPIV?

Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information. (2 Replies)
Discussion started by: kah00na
2 Replies

5. AIX

Need EMC Symmetrix driver for AIX 5.3

Hi all, I hope I'm putting my first post at this site into the right forum. I need help finding the EMC disk driver for AIX version 5.3. I have some new EMC disk presented to a backup server of mine, and right now the EMC hdisks show up looking like this in an lsdev: hdisk495 Available... (2 Replies)
Discussion started by: C.J.Hund
2 Replies

6. AIX

Configurin EMC SAN disks on AIX

This may sound like an absolute rookie question, and it is. I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards. Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch. Can someone... (1 Reply)
Discussion started by: ronellevan
1 Replies

7. HP-UX

Adding a new set of hardisk in EMC Symmetrix

Hello everyone! Could anybody help me how to configure a set of disk? From our existing EMC storage, we still have spaces for a new set of disk. I know how to replace a deffective disk but never had experience in setting/replacing a new pair of disk (M1 and M2). My objective here is to increase... (1 Reply)
Discussion started by: Tris
1 Replies

8. UNIX for Advanced & Expert Users

AIX MPIO and EMC

We are looking at running MPIO for it's redundancy and load balancing benefits. Does anyone know what pieces of software or modules are needed on the VIO server to get load balancing to work. Remember we are using EMC's DMX3500 storage system. We no longer want to use Powerpath. :rolleyes: ... (2 Replies)
Discussion started by: vxg0wa3
2 Replies

9. HP-UX

is anybody using EMC symmetrix?

Hello, I'm looking for reference sites using HP-UX and EMC symmetrix disk. Then, May I ask you questions? (6 Replies)
Discussion started by: cooldugong
6 Replies

10. UNIX for Advanced & Expert Users

Good sites to learn EMC symmetrix

i need to learn this very quick. i'm not trying delve deep into it. just enough to do basic things. does anyone know of any good sites to visit?? (1 Reply)
Discussion started by: TRUEST
1 Replies
Login or Register to Ask a Question