cfgmgr: 0514-621 WARNING


 
Thread Tools Search this Thread
Operating Systems AIX cfgmgr: 0514-621 WARNING
# 1  
Old 07-02-2011
cfgmgr: 0514-621 WARNING

Dear all
i have a sun SL500 tape library attached to my AIX box while issue the command cfgmgr i have the below issue

test>cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.fcp.changer

please advice .
# 2  
Old 07-02-2011
see here

regards
zxmaus
# 3  
Old 07-02-2011
kindly check

P690_shbnbksrv/nbkcatalog/CD1-AIX>cfgmgr -i .
FAILURES
--------
Filesets listed in this section failed pre-installation verification
and will not be installed.
Missing Filesets
----------------
The following filesets could not be found on the installation media.
If you feel these filesets really are on the media, check for typographical
errors in the name specified or, if installing from directory, check for
discrepancies between the Table of Contents file (.toc) and the images that
reside in the directory.
devices.fcp.changer
<< End of Failure Section >>
# 4  
Old 07-14-2011
I would check with your tape library vendor and see if they can provide the devices.fcp.changer fileset. Once that is installed, it will probably work.
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Post Here to Contact Site Administrators and Moderators

Cfgmgr Error

Hi, My AIX server able to detect the LUN's which is mapped from IBM v7k storage, And i allocated one more LUN from HP storage but it's appear two hdisk instead of one and it's showing incorrect LUN ID. SDDPCM driver already installed on this server. During cfgmgr, Im getting this message :... (1 Reply)
Discussion started by: xinuadmin
1 Replies

2. AIX

0514-516 Device Configuration Database Lock Service

Hello guys, on one of our AIX VIO LPARs I can not remove hdiskpower devices, which seemed to presented to the VIO in an incorrect way and behaviour (not all paths can be seen, pseudo device name is unknown etc.) Therefor I decided to deattach the hdiskpower device from PowerPath controll by: ... (5 Replies)
Discussion started by: tomek79
5 Replies

3. AIX

cfgmgr in my aix box

Hi When I run cfgmgr -v in my aix box I get the below error : cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.loopback My oslevel is 6100-06-02-1044 Please assist. Please use and tags when... (3 Replies)
Discussion started by: samsungsamsung
3 Replies

4. AIX

Dual port NIC, cfgmgr

OS: AIX 6.1 The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install: `cfgmgr -v` on 10.15.xx.xxx cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
Discussion started by: b1f30
3 Replies

5. AIX

cfgmgr: Filesets missing

Hi all, I have a System i server with a couple of AIX LPARs. One of the LPARs owns a dual-channel scsi adapter to which I connect a tape library (IBM TS3100) and a DVD Drive. I had some problems to get the Tape Library detected but finally I got it: rmt0 Available 03-08-01-4,0 IBM 3580... (1 Reply)
Discussion started by: wendelalexis
1 Replies

6. AIX

cfgmgr

Hi All, I remember my old senior mentor in AIX that cfgmgr should not be terminated on your console. Because if it's terminated in the middle, the odm might get corrupted. Is that true for AIX 5.x? Regards, itik (1 Reply)
Discussion started by: itik
1 Replies

7. AIX

cfgmgr and hdisk number allocation

Hi - can anybody tell me what the default behaviour is for cfgmgr when it allocates hdisk numbers to newly discovered disks in the ODM ? I want to add a disk from our FAStT700 SAN disk array and import it on our p-series (AIX 5.2). Problem is we import and export Flashcopy devices fror scripted... (5 Replies)
Discussion started by: fosteria
5 Replies

8. AIX

LPAR and CFGMGR

I have a P570 that for some reason is not allowing the P1-T6 NIC to be recognized. I have confirmed from the HMC that it is set for the LPAR, but when I do a cfgmgr, it won't recognize it. It though is recognizing the slot cards just fine which are P1-C3 for one shelf and P1-C3 of another shelf.... (1 Reply)
Discussion started by: LegendMan
1 Replies
Login or Register to Ask a Question