We have AIX 6.1 system attached to SAN disks (DS4700 and DS8100) thru SVC.
Initially when the system was I forgot to install sddpcm drivers. and wanted to know how can i go with the installation of the sddpcm drivers.
My understandin going thru the manual
http://publib.boulder.ibm.com/infoce...c/f2bsdu03.pdf
is
1. Unmount all the FS related to the VG.
2. varyoff VG
3. Export VG
4. rmdev -Rdl hdiskxx
5. install sddpcm drivers
6. import vg
Does this look correct.
$ lsdev -Cc disk
hdisk0 Available 00-08-00 SAS Disk Drive
hdisk1 Available 00-08-00 SAS Disk Drive
hdisk2 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk3 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk4 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk5 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk6 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk7 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk8 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk9 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk10 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk11 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk12 Available 05-00-02 MPIO IBM 2145 FC Disk
hdisk13 Available 05-00-02 MPIO IBM 2145 FC Disk
$ lslpp -l | grep devices.fcp.*
devices.fcp.disk.array.diag
devices.fcp.disk.array.rte
devices.fcp.disk.rte 6.1.4.6 COMMITTED FC SCSI CD-ROM, Disk,
devices.fcp.tape.rte 6.1.4.2 COMMITTED FC SCSI Tape Device Software
devices.fcp.disk.array.rte
devices.fcp.disk.rte 6.1.4.6 COMMITTED FC SCSI CD-ROM, Disk,
devices.fcp.tape.rte 6.1.4.2 COMMITTED FC SCSI Tape Device Software
I did look at the sddpcm manual
http://publib.boulder.ibm.com/infoce...c/f2bsdu03.pdf
and I think this is what I need to kn