8 More Discussions You Might Find Interesting
1. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
2. AIX
Hi
I need to make some restore tapes for our old AIX systems
I have purchased some DDS2 tapes and cleaning tapes
The tape drive is rmt0
what commands can I enter to run the cleaning tape through the drive
and are the any commands I can enter to test these drives
prior to using... (2 Replies)
Discussion started by: madmacher
2 Replies
3. AIX
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
4. AIX
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Discussion started by: filosophizer
5 Replies
5. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
6. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
7. AIX
I've just landed in a situation where an old IBM RS/6000 7025 F40 running AIX 4.2.1 has had it's tape drive fail. The tape drive in question is an HP C1533A 4mm 4GB/8GB DAT drive. It repeatedly gets write failures, and my trusty techique of whacking the cleaning tape in hasn't worked. Unfortunately... (2 Replies)
Discussion started by: phaedrus
2 Replies
8. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
AMMT(8) System Manager's Manual AMMT(8)
NAME
ammt - Amanda version of mt
SYNOPSIS
ammt [ -d ] [ -f|-t device ] command [ count ]
DESCRIPTION
Ammt provides just enough of the standard mt command for the needs of Amanda. This is handy when doing a full restore and the standard mt
program has not yet been found.
Ammt also provides access to the Amanda output drivers that support various tape simulations.
See the amanda(8) man page for more details about Amanda. See the OUTPUT DRIVERS section of amanda(8) for more information on the Amanda
output drivers.
OPTIONS
-d Turn on debugging output.
-f device
Access tape device device. If not specified, the TAPE environment variable is used.
-t device
Same as -f.
command count
Which command to issue, and an optional count of operations.
COMMANDS
Each command may be abbreviated to whatever length makes it unique.
eof|weof count
Write count (default: 1) end of file marks (tapemarks).
fsf count
Skip forward count (default: 1) files.
bsf count
Skip backward count (default: 1) files.
asf count
Position to file number count (default: 0) where zero is beginning of tape. This is the same as a rewind followed by a fsf count.
rewind Rewind to beginning of tape.
offline|rewoffl
Rewind to beginning of tape and unload the tape from the drive.
status Report status information about the drive. Which data reported, and what it means, depends on the underlying operating system, and
may include:
ONLINE Indicates the drive is online and ready.
OFFLINE
Indicates the drive is offline or not ready.
BOT Indicates the drive is at beginning of tape.
EOT Indicates the drive is at end of tape.
PROTECTED
Indicates the tape is write protected.
ds Device status.
er Error register.
fileno Current tape file number.
blkno Current tape block number file.
NOTE: many systems only report good data when a tape is in the drive and ready.
AUTHOR
Marc Mengel <mengel@fnal.gov>
John R. Jackson <jrj@purdue.edu>
SEE ALSO
amanda(8)
AMMT(8)