Sponsored Content
Operating Systems Solaris Problem with DiskSuite replicas Post 98453 by RTM on Wednesday 8th of February 2006 09:40:52 AM
Old 02-08-2006
metadb -i
flags first blk block count
a m p luo 16 1034 /dev/dsk/c0t0d0s5
a u 16 1034 /dev/dsk/c1t9d0s3
a p luo 16 1034 /dev/dsk/c1t11d0s0

Since you did a metadb -i, you should have noted what the flags mean:

l - locator for this replica was read successfully
u - replica is up to date
o - replica active PRIOR to last mddb configuration change

Since you made a addition, it won't have the 'o' flag since it wasn't ACTIVE PRIOR to the last change. As far as the system is concerned, the replica is up to date. A reboot will put all the flags you are looking for on /dev/dsk/c1t9d0s3 - I don't believe I've ever seen any way to get them on there any other way and I found nothing on Sunsolve that was helpful.
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

SDS and replicas

Hello, We are using Solstice Disk Suite on Solaris 2.7. We want to add two striped volume with six disks. On each disk, we take a slice and we create the stripe. That I want to know : Is it necessary to add two replicas on the same slice on the new disks, as made before on the others... (1 Reply)
Discussion started by: christophe
1 Replies

2. Solaris

insufficient metadevice database replicas ERROR

First I would like to thank this forum for assisting me in setting up my 1st sunbox. Could not have done it if it had not been for you guys and google :D I have mirrored my box and have SUCCESSFULLY tested booting from the rootdisk and rootmirror successfully. I am now looking at configuring... (2 Replies)
Discussion started by: mr_manny
2 Replies

3. Solaris

Solstice DiskSuite

Has anybody every used Solstice DiskSuite? I am having trouble setting it up. I installed it without a problem, but do I really have to blow away the drives on the D1000 just to create a metastate database? (8 Replies)
Discussion started by: hshapiro
8 Replies

4. UNIX for Dummies Questions & Answers

disksuite and raidctl used together

I have a live Sunfire v440 server with 4 drives and I want to mirror drive 0 & 1 to 2 & 3. The on-board raid controller only allows for 1 live mirror. I was thinking of disksuite, but unfortunately the second disk is just one large partition with no free slices. I was thinking of using... (0 Replies)
Discussion started by: csgonan
0 Replies

5. Solaris

mirroring with disksuite

hi all, i want to mirror two disks with disksuite under solaris 9 , doses smeone can explain me Briefly the essential steps to do that plz ? (3 Replies)
Discussion started by: lid-j-one
3 Replies

6. Solaris

disksuite mirroring d0 to d2 and d1 to d3

I have a SOlaris 10 v240 server. I'm installing disksuite to mirror the root drive D0 to D2. I also have one partition on disk 1 that I want to mirror to D3. I am not using ZFS right now. Can I add that to my initial mirroring configuration or can I only mirror 1 drive to 1 drive? Can I... (2 Replies)
Discussion started by: csross
2 Replies

7. Solaris

metadevices: how to test metadb (how to corrupt replicas/understanding replicas)

Hi all, I recently started exploring Solaris 10. I am testing metadevices now. I have been reading about the state databases here: 6.State Database (Overview) (Solaris Volume Manager Administration Guide) - Sun Microsystems So I created 3 metadbs on 2 slices (6 in total; c1t1d0s3... (3 Replies)
Discussion started by: deadeyes
3 Replies

8. Solaris

Disksuite question

Hello all, I have a Solaris Disksuite question :- I will be adding 4 new drives to an E250 server and need will be configuring 2 striped volumes each consisting 2 new disks with SVM. In the end i will have 2 volumes each of 72gb. So in effect i will have 1 volume called D7 and another volume... (6 Replies)
Discussion started by: commandline
6 Replies

9. Solaris

Solaris Volume Manger - Database Replicas Question - Benefits of Increasing Default Size?

Hey all! I was hoping someone knew anything about this one... I know with Solaris Volume Manager the default Database Replica size is 8192 blocks (4MB approximately) Now I know you can increase this amount but is there any point? The reason I am asking this is that I've setup mirroring on... (2 Replies)
Discussion started by: Keepcase
2 Replies

10. Solaris

zfs raidz2 - insufficient replicas

I lost my system volume in a power outage, but fortunately I had a dual boot and I could boot into an older opensolaris version and my raidz2 7 drive pool was still fine. I even scrubbed it, no errors. However, the older os has some smb problems so I wanted to upgrade to opensolaris11. I... (3 Replies)
Discussion started by: skk
3 Replies
delete directory(1m)													      delete directory(1m)

NAME
delete directory - Deletes a directory SYNOPSIS
cdscp delete directory directory-name ARGUMENTS
The full name of the directory. DESCRIPTION
The delete directory command deletes a directory. The directory cannot contain any object entries, soft links, or child pointers. The master replica must be the only remaining replica in the cell. Use the delete replica command if you need to remove read-only replicas. Privilege Required You must have delete permission to the directory and write permission to the clearinghouse that stores the master replica of the directory. The server principal needs administer permission to the parent directory or delete permission to the child pointer that points to the directory you intend to delete. NOTE
This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE. EXAMPLE
The following command deletes the directory /.:/eng from the namespace: cdscp> delete directory /.:/eng RELATED INFORMATION
Commands: create directory(1m), delete replica(1m), list directory(1m), set directory(1m), set directory to skulk(1m), show directory(1m) delete directory(1m)
All times are GMT -4. The time now is 04:40 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy