HPUX Hardware commands. Post: 94058

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Hello, i have to activate a network interface. for HPUX1100 i can command ifconfig lanx plumb. Why doesent it works under HPUX10.20? How can i realise it? thanks for your help!:)

2. HP-UX

Hi guys, Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem?

3. AIX

AIX Hardware commands

Hi All, Needed commands to find Monitor , chassis & keyboard related information on AIX. Please please please help. Thanks VK

4. HP-UX

Need HPUX admin commands lost

Hi All Please somebody send me list of admin commands used for HPUX. Thanks Sunanda

5. Solaris

commands hanging when querying hardware

Hi all Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :- iostat -en sysdef - ( stops at the devices part ) format cfgadm -al Anything that searches the devices, then the command hangs. ...

6. HP-UX

minimum hardware requirement for HPUX 11i V3

I am new for HPUX OS and want to pursue my career in HPUX Administration. I could not able to get following information from HP.com site, that why I need an assistance to know that - can I install HPUX 11i V3 OS on old HP B2000 & B1000 workstations (these workstation are 4 to 5 year old) or not,...

7. Solaris

Which company's hardware is more stable, in case of IBM (AIX), HP (HPUX) & Sun (Solaris)

Hi guru I want to know which company's hardware is more stable means in term of H/W faults or replacement, in case of IBM (AIX), HP (HPUX) & SUN MICROSYSTEM (Solaris) & which order also, if we go through more stable to less stable system. Regards

8. Hardware

Useful Hardware commands

Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands? cat /proc/cpuinfo cat /proc/meminfo dmesg lspci sudo dmidecode cpuid | more lspci -v | grep VGA sudo lspci -v -s 00:02.0 sudo lspci -vvv...

9. HP-UX

Status of hardware in HpUx

We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute lanscan ioscan -fnC lan The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &...

10. HP-UX

HPUX 10.20 SCSI Hardware Drivers

I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system. I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd...

LEARN ABOUT NETBSD

bt3c

BT3C(4) 						   BSD Kernel Interfaces Manual 						   BT3C(4)

NAME

     bt3c -- 3Com Bluetooth PC Card driver

SYNOPSIS

     bt3c* at pcmcia? function ?

DESCRIPTION

     The bt3c driver provides support for the 3Com Bluetooth PC Card, model 3CRWB6096, to the Bluetooth protocol stack.

FIRMWARE

     This card needs firmware loaded before it will work. Due to copyright restrictions we cannot distribute the firmware with NetBSD, but if you
     have the card then you should have received a CD with the drivers on, or you may download the latest version from the 3Com website. Create a
     directory named bt3c in the search path of the firmload(9) kernel subsystem. Now, extract the driver archive and find the firmware file
     called BT3CPCC.bin, and place this file in the newly created directory. The firmware will be loaded automatically as needed.

DIAGNOSTICS

     bt3c%d: Cannot open firmware
	  This will be printed to the console if the device cannot open the firmware file as described above.

     bt3c%d: Antenna In
     bt3c%d: Antenna Out
	  If the kernel is compiled with the DIAGNOSTIC option, these messages will be produced on the console when the card antenna position is
	  changed.

     bt3c%d: sleeping
     bt3c%d: waking up
	  These messages will be produced when the card is enabled or disabled due to power change events.

SEE ALSO

     bluetooth(4), pcmcia(4), firmload(9)

HISTORY

     This bt3c device driver was written by Iain Hibbert using FreeBSD and BlueZ drivers as a reference.  It first appeared in NetBSD 4.0.

BUGS

BSD
								 January 14, 2006							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HPUX 10.20 and 11.00 commands

Discussion started by: ortsvorsteher

2. HP-UX

HPUX config commands

Discussion started by: giriplug