|
|
Sponsored Content
Special Forums
IP Networking
IP Routing
Post 92599 by jaibw on Tuesday 13th of December 2005 03:36:14 AM
12-13-2005
IP Routing
I am using RedHat Linux 9, In this box their are two lan intefaces.
eth0 ====> LAN
192.168.100.100
255.255.255.0
eth1 ====> Internet
Static IP
255.255.255.0
59.144.168.226 (Gateway)
I want to define a gateway 59.144.168.226 for my LAN machines 192.168.100.0/255.255.255.0
so
First I enable IP forward
echo "1" /proc/sys/net/ipv4/ip_forward
Second
route ..................... ???
Please Help Me
eth0 ====> LAN
192.168.100.100
255.255.255.0
eth1 ====> Internet
Static IP
255.255.255.0
59.144.168.226 (Gateway)
I want to define a gateway 59.144.168.226 for my LAN machines 192.168.100.0/255.255.255.0
so
First I enable IP forward
echo "1" /proc/sys/net/ipv4/ip_forward
Second
route ..................... ???
Please Help Me
|
|
10 More Discussions You Might Find Interesting
1. IP Networking
I have SCO Unix. I have 2 routers. as it is now, when someone telnets to UNIX and goes through router #1 everything is fine. The users who go through router #2 can not connect at all. I talked to CISCO and they said I need to set up a second Gateway on UNIX. They said what is happening is that... (1 Reply)
Discussion started by: john fli
1 Replies
2. IP Networking
ok i configured my gateway and IP address(es) using ifconfig and route.. but how can i bind unique IPs to users ? (im using FreeBSD 4.2 RELEASE #3) (9 Replies)
Discussion started by: DevilGREEN
9 Replies
3. UNIX for Dummies Questions & Answers
Can anyone help with the following;
I am working on a unix server (Apple OS X Server). We have two network cards in the server. Both cards are on different subnets i.e en1 is on 192.168.10.10/24 and the built in ethernet is on 10.10.150.10/24. From a computer plugged into en1 (and set to ip... (5 Replies)
Discussion started by: mrthrt
5 Replies
4. UNIX for Advanced & Expert Users
Hi,
in which file and how shuold be decalred a gateway and its IP adresse ?
Where and how add a gateway ?
Many thanks before. (4 Replies)
Discussion started by: big123456
4 Replies
5. Linux
Hello Friends
I have two network cards
eth0 192.168.100.1
eth1 10.0.0.1
There NIC connect with diff. LAN
I want to make my Linux machine as a Router, Please tell me
using
IPTABLES command
ROUTE command
:) (2 Replies)
Discussion started by: jaibw
2 Replies
6. UNIX for Dummies Questions & Answers
Hey guys,
I needed to add a route to my routing table and I got it to work but on reboot it gets removed. Anyone know what file I can add this route to so it stays on the machine after a reboot? (9 Replies)
Discussion started by: kingdbag
9 Replies
7. IP Networking
Hi all,
I am confusing with routing table, i use linux and iptables.
i have 1 internet gateway, and 1 router for VPN.
here is my network.
eth0=192.168.0.1
eth1=192.168.100.1
192.168.0.0/24 --- eth0(Linux Box)eth1 ---(DSL)---Internet
|
... (4 Replies)
Discussion started by: blesets
4 Replies
8. IP Networking
I have a series of new machines that are internet facing (have IP's that are accessible via the 'net) and it has internal facing interfaces. I need to be able to communicate back to the internal network to a specific server which processes monitoring and e-mail traffic. I've been told that I should... (3 Replies)
Discussion started by: BOFH
3 Replies
9. UNIX for Dummies Questions & Answers
Hey all you *Nix Gurus...I got a relatively simple one for ya.
I just cloned an AIX 5.3 server without copy over the Network info. However, now I need to update the routing table on the destination server so that it mirrors the source. Aside from painstakingly, manually updating the ODM using... (1 Reply)
Discussion started by: BlitzSonik
1 Replies
10. UNIX for Dummies Questions & Answers
#include <malloc.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
int*
allocat_array(void)
{
int *array;
int tmp;
int n_values = 0 ;
array = malloc(sizeof(int));
if(array == NULL)
return NULL;
while(scanf("%d",&tmp) != EOF)
{
... (1 Reply)
Discussion started by: vincent__tse
1 Replies
LEARN ABOUT DEBIAN
oidentd_masq.conf
oidentd_masq.conf(5) File Formats Manual oidentd_masq.conf(5) NAME
oidentd_masq.conf - oidentd IP masquerading/NAT configuration file. DESCRIPTION
If you are using IP masquerading or NAT, oidentd can optionally return a username for connections from other machines. Support for this is specified by calling oidentd with the -m (or --masq) flag and by creating an /etc/oidentd_masq.conf file. oidentd can also forward requests for an IP masqueraded connection to the machine from which connection originates by way of the -f option. This will only work if the host to which the connection is forwarded is running oidentd with the -P (proxy) flag, or if the host's ident daemon will return a valid reply regardless of the input supplied by and the address of the host requesting the info (some ident daemons for windows do this, maybe others). FORMAT
<IP Address|Hostname>[/<Mask>] <Ident Response> <System Type> The first field contains the IP address or the hostname of a machine that IP masquerades through the machine on which oidentd runs. The mask parameter can be either a network mask or a mask in CIDR notation. A mask of 24 is equivalent to 255.255.255.0, a mask of 16 is equivalent to 255.255.0.0, etc. The second field specifies the reply that oidentd will return for lookups to the host matching the IP address specified in the first param- eter. The third field specifies the operating system the machine matching the first parameter is running. EXAMPLES
<Host>[/<Mask>] <Ident Response> <System Type> 192.168.1.1 someone UNIX 192.168.1.2 noone WINDOWS 192.168.1.1/32 user1 UNIX 192.168.1.0/24 user3 UNIX 192.168.0.0/16 user4 UNIX somehost user5 UNIX 192.168.1.0/255.255.255.0 user6 UNIX AUTHOR
Ryan McCabe <ryan@numb.org> http://dev.ojnk.net SEE ALSO
oidentd(8) oidentd.conf(5) version 2.0.8 13 Jul 2003 oidentd_masq.conf(5)