10-22-2001
Network settings on Red Hat
HELP!! How do you change the network setting from auto-duplex to 100 Base T Full Duplex in Red HaT?
9 More Discussions You Might Find Interesting
1. Linux
I have setup a AS 2.1 server with no X running or installed. I need to know how to configure the IP and such from command line and change it from DHCP. We used DHCP at first since we didn't know the IP we were going to use and now I need to change it. Any help would be great as Redhat's site just... (2 Replies)
Discussion started by: Acleoma
2 Replies
2. Linux
Hi All,
I configured during the installation my red hat 5 ent with dhcp enable. Now I modified to static on ../ifcfg-eth0. It won't change when network is restarted with ../network restart command. I need to do ifdown eth0 and ifup eth0. And when rebooted, it will go back to dhcp.
Here's... (1 Reply)
Discussion started by: itik
1 Replies
3. Red Hat
I'm am working with a Red Hat Enterprise 3 server.
This is a dedicated server that is supposedly dedicated to one domain, but I have been tasked with trying to figure out if there are files on this system that are being accessed by other IP's.
Does anyone know if how I would go about finding... (0 Replies)
Discussion started by: chrisPlusPlus
0 Replies
4. Red Hat
Hi,
We have Red Hat Enterprise Linux 5.3 running on all our machines and planning to make one machine as a YUM repository server. Using yum utility the rest of the RHEL machines should be able to get the latest patches/ packages.
Done a POC with the packages available in RHEL 5.3 DVD –... (1 Reply)
Discussion started by: uday123
1 Replies
5. Red Hat
Hello,
How do I see what IP addresses are connected to my machine?
thanks (2 Replies)
Discussion started by: sonomao
2 Replies
6. Red Hat
How do I network a Suse installed machine with other computers, specifically Red hat Linux?
This is for a school project, and I can't find any pages that tell how to network a Suse to other computers except how to use a printer. (1 Reply)
Discussion started by: Anna Hussie
1 Replies
7. UNIX for Dummies Questions & Answers
how to know if i use "Red Hat Enterprise Linux" or "Red Hat Desktop" ? (2 Replies)
Discussion started by: ahmedamer12
2 Replies
8. Red Hat
Dear Expert,
I 've installed Redhat linux AS3, My machine having Inbuild network card (Intel(R) 82566DM-2 Gigabit Network Connection).
I've downloaded e1000e-2.3.2 from Intel site, but its not working for my machine. I'm unable to configure the Network.
ifconfig eth0 xx.xx.xx.xx netmask... (0 Replies)
Discussion started by: Mohammed Faiz
0 Replies
9. Red Hat
Dear all,
I have around 7 servers which are running under RHEL 5.x Version. I have supported the server for nearly 3 years. Till now I have not contacted RHEL Network Support from Redhat for any services.
Now a thought came to my mind , that in any case if there is some issue with the OS or... (3 Replies)
Discussion started by: jegaraman
3 Replies
TXP(4) BSD Kernel Interfaces Manual TXP(4)
NAME
txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device txp
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_txp_load="YES"
DESCRIPTION
The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the 3Com Typhoon/Sidewinder chipset.
Basic Ethernet functions are provided as well as support for vlan(4) tag removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
checksum offloading, and transmit ip(4) checksum offloading. There is currently no support for transmit tcp(4) or udp(4) checksum offload-
ing, tcp(4) segmentation, nor ipsec(4) acceleration.
Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl(2). The txp interface employs the address resolu-
tion protocol described in arp(4) to dynamically map between Internet and Ethernet addresses on the local network.
When a txp interface is brought up, by default, it will attempt to auto-negotiate the link speed and duplex mode. The speeds, in order of
attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and 10 Mb/s Half Duplex.
The txp supports several media types, which are selected via the ifconfig(8) command. The supported media types are:
media autoselect
Attempt to autoselect the media type (default)
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex
HARDWARE
The txp driver supports the following cards:
o 3Com 3CR990-TX-95
o 3Com 3CR990-TX-97
o 3Com 3cR990B-TXM
o 3Com 3CR990SVR95
o 3Com 3CR990SVR97
o 3Com 3cR990B-SRV
SEE ALSO
altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4), vlan(4), ifconfig(8)
HISTORY
The txp driver first appeared in OpenBSD 2.9.
BSD
March 12, 2009 BSD