09-30-2005
Need basic disk copy routine for AIX 3
I'm using AIX 3 on IBM PowerStation 520's in a couple of flight simulators where I work. I recently upgraded our disk systems from three 355Mb disks to single 2GB flashdisks. The disk backup utility provided by the manufacturer will only copy 355Mb disks.
I need a basic disk copy routine that will duplicate any size drives. Is there something available for AIX 3? There's no chance my employer will upgrade the OS as it would cost almost $1,000,000 per system due to the need to rewrite all the specialized utilities to work with the new OS. Can it be done using only basic commands? It would be nice if files were concatenated (defragged) during the copy process.
Any tips or help would be appreciated.
tekmeister
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi
Can some one help to understand the follwoing thing:
what is a simple mounting? for examle what the following lines says
/dev/hd2 /usr/xxx
if I have to install a software in a remote server, how i can use local cdrom to read the installation files from?
what about... (3 Replies)
Discussion started by: ajaya
3 Replies
2. AIX
Morning, All
I've been doing some work on AIX print queues, troubleshooting some underlying issues we've been having. In the process of this I've uncovered some potential gaps in our knowledge. Our typical setup is remote impact printers (In this case OKIML5520s, with NICs) and local queues... (0 Replies)
Discussion started by: alexop
0 Replies
3. AIX
how to i find out the disk usage on a server.
say in windows examples its like C:/ D:/ and checking out the disk space.
how can i find in Unix.
can i just use df -k (3 Replies)
Discussion started by: karthikosu
3 Replies
4. UNIX for Dummies Questions & Answers
Hello everybody, iam new to unix. here is a question i had.
when i run errpt -a , sample out put is as follows
LABEL: FCP_ARRAY_ERR4
IDENTIFIER: D5385D18
Date/Time: Mon Sep 25 11:15:59
Sequence Number: 182869
Machine Id: 000166784C00
Node Id: ... (0 Replies)
Discussion started by: karthikosu
0 Replies
5. UNIX for Dummies Questions & Answers
Would this be the right forum to ask basic unix administration questions relating to smitty tasks, etc? (2 Replies)
Discussion started by: NycUnxer
2 Replies
6. UNIX for Dummies Questions & Answers
I have found a question from the exercises of my study mat. The question is
"Why are there a in-core copy and a disk-copy of i-node block and super block?"
If any one know the proper answer then please send me..... (1 Reply)
Discussion started by: dearanik
1 Replies
7. AIX
Good Morning!
My p550 running AIX 5.3 TL9 SP6 is supposedly connected to its SAN. However, it's not configuring its luns or behaving like it sees any traffic at all.
"fcstat fcs0" and "fcstat fcs1" both indicate no traffic moving across the interfaces.
Does AIX have a basic command that... (4 Replies)
Discussion started by: dafydd2277
4 Replies
8. AIX
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Discussion started by: filosophizer
9 Replies
9. Solaris
Hello,
I am creating a new disk using the following command:
dd if=/dev/zero of=/export/home/ramdisk/0 bs=512 count=4096k
after creating the disk, i tool a ufsdump of a solaris 10 filesytem (disk size 512MB)
ufsdump -cvf /export/home/ufsdump/sol_orig /and then restored the dump files onto... (10 Replies)
Discussion started by: Zam_1234
10 Replies
10. Solaris
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Discussion started by: sparcman
2 Replies
LEARN ABOUT HPUX
vxsplitlines
vxsplitlines(1M) vxsplitlines(1M)
NAME
vxsplitlines - show disks with conflicting configuration copies in a cluster
SYNOPSIS
vxsplitlines [-g diskgroup] [-c daname]
DESCRIPTION
If you import portions of a disk group on different systems, this can lead to conflicting configuration copies on the disks of the disk
group.
If the configuration information in a disk group is ambiguous, it may not be possible for Veritas Volume Manager to determine which config-
uration copy is most up-to-date. (This is usually termed a serial split brain (SSB) condition when it occurs in a cluster.) You cannot
import a disk group in this state unless you specify which disk's configuration copy to use.
You can use the vxsplitlines command to see which disks in a disk group have conflicting configuration copies, and use this information
together with your knowledge of the history of the disk groups' usage to determine which configuration copy is most valid.
The output from vxsplitlines displays the vxdg commands that you can run to import the disk group using the available configuration copies.
The -o selectcp option of the vxdg import command is used to select the configuration copy to use for the import.
OPTIONS
-c daname Display the SSB IDs for each disk that are stored in the configuration copy on the disk specified by its disk access name.
Note: Although the SSB IDs for some disks may match, this does not necessarily mean that those disks' configuration copies have
recorded all the configuration changes. When viewed from some other configuration copies, the SSB IDs of the same disks may not
match.
-g diskgroup
Specifies the disk group. If a disk group is not specified, the default disk group is used as determined from the rules on the
vxdg(1M) manual page.
EXAMPLES
Display the disks on each side of the split in the disk group newdg:
vxsplitlines -g newdg
Display the SSB IDs stored in the configuration copy on disk c2t4d0:
vxsplitlines -g newdg -c c2t4d0
NOTES
The vxsplitlines is primarily intended to be used with private disk groups, but it also works with shared disk groups.
The version number of the disk group must be 110 or greater.
SEE ALSO
vxdg(1M)
Veritas Volume Manager Administrator's Guide
VxVM 5.0.31.1 24 Mar 2008 vxsplitlines(1M)