well mate, the system will load the kernel, but when the ufs-boot will forceload the metadrivers from the /etc/system for the kernel initialization there will be an entry like:
rootdev:/pseudo/md@0:0,0,blk
so the kernel tries to load the next modules from a device which doesn't exist. panic --> next try --> panic --> next try -->
i would do the same, boot from CD, change the md entries in the vfstab back and delete the sds-forceloads and rootdev from the system file
by the way, just for info: a sds database default length is 8192 blocks, that would be around 4 MB on a 512b LBA disk (-l would be the option from metadb to change that if your LBA is smaller) . i would recommend to make at least 3 copies/disk to prevent block errors, so we are on 12MB. usually i make 256MB slices, so i am prepared for VxVM aswell. the recommendation from sun for slice 7 is based on a suncluster enviroment, there the metadb's must be on slice 7 on the internal disks, and if you add a external disk to a metaset the db is automaticaly created on slice 7.
I have a problem with a submirror of the root filesystem,
in the procedure in order to unmirror the FS say:
metadetach -f d0 d20
metaroot c0t0d0s0
but, in my system the metaroot cause a segmentation fault coredump. I knew that the command modify the /etc/system and
the /etc/vfstab.
I try... (3 Replies)
Dear Forum savants,
I have a problem that I am not sure how to overcome. Two years ago I had
a friend build me computer with a linux os (red hat) for learning purposes. It happens to have an oracle server on it as well... Anyway , because of personal reasons, I lost complete interest in... (5 Replies)
i forgot my password on a HP-UX 9.xx machine. is there a possible way of changing it without knowing the root passwd?
I would do it with a boot disk and chroot but I dont have a boot disk available....
any ideas?
thanks!!
Paul Tittel (1 Reply)
Hello,
Is there a way to reset the "root" unix password, pretty much like you would do in linux by going into single user mode? :confused: :confused:
Thank you in advance. (5 Replies)
hi
i have a RHEL 4 and have forgot root passwd
tried to boot in by singel user and then changing the passwd but it's not letting me do that ......throwing some weird error as .......manipulation
i also tried to make a new user from CLI but even though it's not letting me in from that user as... (12 Replies)
hello friends,
I am currently using solaris 10.
I have lost the root password.
Can you please give me a step by step procedure on how to set the password again. (11 Replies)
Dear all,
I am using RHEL5. In that machine i forgot the root passwd. But i can able to login by using my username. But performing administrative tasks it will asks the root login. Can somebody tell me reset the root passwd.
Thanks in advance.
Regards,
Prakashkumar.S (2 Replies)
hi everyone
i have forgot my root password and i have other user to login. can i get the password without restarting the server as that cant be afforded. . it is a Sparc architecture 2U blade server. it is old server mounted and functional since 2009. what should be the modus oprandee. i am novice... (5 Replies)
Discussion started by: janakors
5 Replies
LEARN ABOUT OPENSOLARIS
install-solaris
install-solaris(1M)install-solaris(1M)NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)
09-29-2005
