10-08-2001
Example config works fast for us.....
Here is our working samba conf file /etc/smb.conf
Quote:
[global]
workgroup = UNIX
encrypt passwords = yes
domain logons = yes
server string = Samba on UNIX
netbios name = ATHLON
hosts allow = 192.168.0.169 localhost
interfaces = 192.168.0.155/255.255.255.0
log level = 2
default service = data
local master = yes
wins support = yes
name resolve order = wins lmhosts hosts bcast
dns proxy = yes
security = user
os level = 34
preferred master = yes
domain master = yes
[homes]
browsable = no
writable = yes
[unix]
path = /usr/local/unix_files
valid users = unix, nobody, root
browseable = yes
comment = UNIX Disk on
WWW.UNIX.COM
volume = UNIX-Disk
guest ok = yes
writeable = yes
[data]
path = /usr/local
browseable = yes
comment = Data Disk on
WWW.UNIX.COM
volume = Data-Disk
guest ok = yes
writeable = yes
[netlogon]
comment = Domain Logon Service
path = /usr/local/samba/login
public = no
writeable = no
browsable = no
This configuration works fine (very fast).... is only one master controller (samba server) with a bunch of clients on the SAME subnet (ethernet segment). I would suggest you try something like this (without SSL) first to see if this is fast for you.
9 More Discussions You Might Find Interesting
1. Post Here to Contact Site Administrators and Moderators
The site has gone slow for quite some time...
Can you do somethin abt it (2 Replies)
Discussion started by: DPAI
2 Replies
2. UNIX for Advanced & Expert Users
I have an HP-UX server with a Network Appliance Filer attached over Gigabit Ethernet. I am noticing very slow response time when using "ls -l" on one directory on one of the several NFS mounted filesystems. The "ls" command by itself does not seem to be a problem. Typically I get a response within... (3 Replies)
Discussion started by: keelba
3 Replies
3. SCO
Hi All
We have one SCO Server here and it never gives us any trouble. Until Now!! Well its not earth shattering but we have one user who is complaining of a very slow response time when changing to his Home Directory. Other users who have similar profiles are OK. I have su'd to this user and I can... (0 Replies)
Discussion started by: JohnOB
0 Replies
4. Shell Programming and Scripting
Hi I am using a cut command in the script which is slowing down the performance of the script .can anyone suggest the other ways of doing the same cut command
Record_Type=`echo "$line" | cut -c19-20`
*******this is slowing down*********
i have 4 more cut commands
2 in one loop and 2 in inner... (3 Replies)
Discussion started by: pukars4u
3 Replies
5. IP Networking
Hi everyone, I posted this on the Solaris forums but so far no one has been able to help...
I'm new to solaris and I've installed 10, update 5. I've configured samba (very badly I believe) so that I can access my solaris box from my XP 64 computer.
Both are on a local network (connected via... (1 Reply)
Discussion started by: ciscocbee
1 Replies
6. UNIX and Linux Applications
The problem is between 2:00 and 5:00 PM.
The email (procmail) proccess load up big time. If I do a prstat at 8:00 AM
I have about 100 proccess and 30 mails in mailq.
Now at 3:50 PM, I have over 1000 proccess from prstat and 600 e-mail in mailq.
Some mail takes 2 hours to get out or in.
... (1 Reply)
Discussion started by: photon
1 Replies
7. AIX
Hello.
I am running AIX 5.2 on a 9131-52A
I am trying to run a mksysb. I ran one on a similar 9131 and it did not take long at all. But this one is taking forever. My output is as follows:
*********************************************************
AIX:/ # mksysb -i /dev/rmt0
Creating... (2 Replies)
Discussion started by: mhenryj
2 Replies
8. Solaris
Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account.
If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
Discussion started by: ideal2545
0 Replies
9. Red Hat
Hi,
I have RHEL 6.1 on VM, where Big data is installed. Every 3-4 days, its web interface become very slow and I had to reboot this VM. I was checking with "top" and that shows that free memory is less. Can this be a reason for slowness ? No big load on CPU.
# free -m
total ... (6 Replies)
Discussion started by: solaris_1977
6 Replies
LEARN ABOUT DEBIAN
oidentd_masq.conf
oidentd_masq.conf(5) File Formats Manual oidentd_masq.conf(5)
NAME
oidentd_masq.conf - oidentd IP masquerading/NAT configuration file.
DESCRIPTION
If you are using IP masquerading or NAT, oidentd can optionally return a username for connections from other machines. Support for this is
specified by calling oidentd with the -m (or --masq) flag and by creating an /etc/oidentd_masq.conf file.
oidentd can also forward requests for an IP masqueraded connection to the machine from which connection originates by way of the -f option.
This will only work if the host to which the connection is forwarded is running oidentd with the -P (proxy) flag, or if the host's ident
daemon will return a valid reply regardless of the input supplied by and the address of the host requesting the info (some ident daemons
for windows do this, maybe others).
FORMAT
<IP Address|Hostname>[/<Mask>] <Ident Response> <System Type>
The first field contains the IP address or the hostname of a machine that IP masquerades through the machine on which oidentd runs. The
mask parameter can be either a network mask or a mask in CIDR notation. A mask of 24 is equivalent to 255.255.255.0, a mask of 16 is
equivalent to 255.255.0.0, etc.
The second field specifies the reply that oidentd will return for lookups to the host matching the IP address specified in the first param-
eter.
The third field specifies the operating system the machine matching the first parameter is running.
EXAMPLES
<Host>[/<Mask>] <Ident Response> <System Type>
192.168.1.1 someone UNIX
192.168.1.2 noone WINDOWS
192.168.1.1/32 user1 UNIX
192.168.1.0/24 user3 UNIX
192.168.0.0/16 user4 UNIX
somehost user5 UNIX
192.168.1.0/255.255.255.0 user6 UNIX
AUTHOR
Ryan McCabe <ryan@numb.org>
http://dev.ojnk.net
SEE ALSO
oidentd(8) oidentd.conf(5)
version 2.0.8 13 Jul 2003 oidentd_masq.conf(5)