08-11-2005
Can not extend a JFS file system
Hi,
I am getting an error message when i try to increase the size of a filesystems
under AIX 4.3.3:
chfs: 0506-932 Can not extend a JFS file system with nbpi = 4096
and frag = 4096 past 134217728 (512 byte blocks).
-> Characteristics Journaled File System
[Entry Fields]
File system name /u04/db/TRAINING
NEW mount point [/u04/db/TRAINING]
SIZE of file system (in 512-byte blocks) [163840000]
Mount GROUP []
Mount AUTOMATICALLY at system restart? yes +
PERMISSIONS read/write +
Mount OPTIONS [] +
Start Disk Accounting? no +
Fragment Size (bytes) 4096
Number of bytes per inode 4096
Compression algorithm no
Large File Enabled true
Allocation Group Size (MBytes) 64
-->
* Logical volume NAME nlv_training
Logical volume TYPE [jfs]
POSITION on physical volume middle +
RANGE of physical volumes minimum +
MAXIMUM NUMBER of PHYSICAL VOLUMES [32]
to use for allocation
Allocate each logical partition copy yes +
on a SEPARATE physical volume?
RELOCATE the logical volume during yes +
reorganization?
Logical volume LABEL [/u04/db/TRAINING]
MAXIMUM NUMBER of LOGICAL PARTITIONS [4096]
SCHEDULING POLICY for reading/writing parallel +
logical partition copies
PERMISSIONS read/write +
Enable BAD BLOCK relocation? yes +
Enable WRITE VERIFY? no +
Mirror Write Consistency? yes +
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Need help,
I have read the docs but need some better understanding.
Can someone explain the reasons behind setting the values for
fragement size, i-node and allocation group size?
Thanks, (6 Replies)
Discussion started by: kburrows
6 Replies
2. AIX
hi all,
can sumbody give me a link which gives the basic layout of JFS, JFS2 and the veritas file system.
and i also want to know about the data structures used in this filsystem
thanx in advance (0 Replies)
Discussion started by: anwerreyaz
0 Replies
3. AIX
Hello all,
I'm trying to grow a file system by 500MB using SMIT on AIX 5.2 but I receive this error:
"0516-404 allocp: This system cannot fulfill the allocation request.
There are not enough free partitions or not enough physical volumes
to keep strictness and satisfy allocation requests.... (3 Replies)
Discussion started by: need2bageek
3 Replies
4. AIX
Hi all,
Can anyone define the difference between jfs and jfs2 filesystem as well as usage of jfs log files....
Thanks.... (7 Replies)
Discussion started by: sumathi.k
7 Replies
5. Solaris
Hello All,
I am using a SunOS machine. My application creates output files for the downstream systems. However output files are restricted to 2GB of file size in SunOS due to which I am forced to create multiple files which is not supported by the downstream due to some limitations.
Is... (5 Replies)
Discussion started by: pasupuleti81
5 Replies
6. AIX
how to change the filesystem from jfs to jfs2 in ibm aix6.1
please tell me command for that.
thank you,
paandu (2 Replies)
Discussion started by: paandur
2 Replies
7. HP-UX
Background:
# uname -a
HP-UX deedee B.11.23 U ia64 4294967295 unlimited-user license
deedee.rsn.hp.com:/
# bdf /opt
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol6 6553600 6394216 158144 98% /opt
/opt is almost full... (3 Replies)
Discussion started by: Rob Sandifer
3 Replies
8. Emergency UNIX and Linux Support
Hi All,
I have Solaris-10 configured with two non-global zones. All file-systems are mounted on global zone and data file-systems are mounted on non-global zone as lofs.
I have added 4 luns of 100 GB each and still not able to extend a file-system. This is production server, so I can not... (5 Replies)
Discussion started by: solaris_1977
5 Replies
9. Solaris
Hi All
I want to extend this file system to 120Gb:
df -h /xyz
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d80 98G 35G 62G 37% /xyzand the NetApp admin is going to give me an LUN with 22Gb.
This file system is mounted on:
metastat d80... (1 Reply)
Discussion started by: fretagi
1 Replies
10. AIX
Hi,
I have inherited this AIX 5.3 host. I'm unable to increase the /usr file system. It gives me this error.
What needs to be done to remove this error?
vios:/home/padmin$ chfs -a size=+128M /usr
0516-304 lquerypv: Unable to find device id 0002ef4df616f9690000000000000000 in the Device
... (14 Replies)
Discussion started by: dn888
14 Replies
LEARN ABOUT OSF1
lvdisplay
LVDISPLAY(8) System Manager's Manual LVDISPLAY(8)
NAME
lvdisplay - display attributes of a logical volume
SYNOPSIS
lvdisplay [-a|--all] [-c|--colon] [-d|--debug] [-h|-?|--help] [--ignorelockingfailure] [--maps] [--nosuffix] [-P|--partial] [--units hHbB-
sSkKmMgGtTpPeE] [-v|--verbose] [--version] [LogicalVolumePath [LogicalVolumePath...]]
lvdisplay --columns | -C [--aligned] [-a|--all] [-d|--debug] [-h|-?|--help] [--ignorelockingfailure] [--noheadings] [--nosuffix]
[-o|--options [+]Field[,Field]] [-O|--sort [+|-]Key1[,[+|-]Key2[,...]]] [-P|--partial] [--segments] [--separator Separator] [--unbuffered]
[--units hHbBsSkKmMgGtTpPeE] [-v|--verbose] [--version] [LogicalVolumePath [LogicalVolumePath...]]
DESCRIPTION
lvdisplay allows you to see the attributes of a logical volume like size, read/write status, snapshot information etc.
lvs (8) is an alternative that provides the same information in the style of ps (1). lvs is recommended over lvdisplay.
OPTIONS
See lvm for common options and lvs for options given with --columns.
--all Include information in the output about internal Logical Volumes that are components of normally-accessible Logical Volumes, such as
mirrors, but which are not independently accessible (e.g. not mountable). For example, after creating a mirror using 'lvcreate -m1
--mirrorlog disk', this option will reveal three internal Logical Volumes, with suffixes mimage_0, mimage_1, and mlog.
-c, --colon
Generate colon separated output for easier parsing in scripts or programs. N.B. lvs (8) provides considerably more control over the
output.
The values are:
* logical volume name
* volume group name
* logical volume access
* logical volume status
* internal logical volume number
* open count of logical volume
* logical volume size in sectors
* current logical extents associated to logical volume
* allocated logical extents of logical volume
* allocation policy of logical volume
* read ahead sectors of logical volume
* major device number of logical volume
* minor device number of logical volume
-m, --maps
Display the mapping of logical extents to physical volumes and physical extents. To map physical extents to logical extents use
pvs --segments -o+lv_name,seg_start_pe,segtype.
--columns | -C
Display output in columns, the equivalent of lvs. Options listed are the same as options given in lvs (8).
Examples
"lvdisplay -v /dev/vg00/lvol2" shows attributes of that logical volume. If snapshot logical volumes have been created for this original
logical volume, this command shows a list of all snapshot logical volumes and their status (active or inactive) as well.
"lvdisplay /dev/vg00/snapshot" shows the attributes of this snapshot logical volume and also which original logical volume it is associated
with.
SEE ALSO
lvm(8), lvcreate(8), lvscan(8), pvs(8)
Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVDISPLAY(8)