Sponsored Content
Special Forums IP Networking Alternate to RARP Solaris 5.6 & 5.8 Post 76441 by rhfrommn on Tuesday 28th of June 2005 10:52:07 AM
Old 06-28-2005
I don't think there is a solution to that. You need to have a boot server on each vlan. Where I work now our jumpstart server has an interface on every subnet which works fine. Or you can designate one machine on each vlan as the boot server for that vlan, then just that one will need to be able to talk to the rarp server.

I would probably look at the first option if I were you. See if you can create virtual interfaces for your rarp server so it is on every vlan. That is by far the easiest if you can do it that way.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Solaris & XP connection

Hi, Ok so I'm a new to Solaris (& networking) too, I have an ultra 5 and a network card weith a cross over cable going into my network card on my xp machine that has fatband going into it. I want to utlimately get the two machines talking, I have the IP address of the XP machine but am not... (1 Reply)
Discussion started by: AlanB
1 Replies

2. Solaris

Jumpstart: Rarp protocol specifics

I am having trouble locating a boot server on my subnet. I am trying to avoid installing a boot server if one exisits. Is there a way for me to broadcast a Rarp request to see if any boot servers are on my subnet and if so identify them? I think this will only work if the Rarp protocol supports... (3 Replies)
Discussion started by: mhm4
3 Replies

3. UNIX for Dummies Questions & Answers

Help with waiting for ARP/RARP packet

All, I am no UNIX guru and all of them on my project have been unable to figure out the situation regarding the "waiting for ARP/RARP packet" issue we are experiencing. Hopefull, someone here will have some much needed insight.... The workstation is crashing while no one is around, the... (1 Reply)
Discussion started by: chezmargm
1 Replies

4. Linux

VMware ESX server && Solaris 10 on same PC ??

Hi all, I tried to install Solaris 10 and then VMware ESX server v3.02 on the same PC (or hard drive). But after successfully installing Solaris 10, when I installed Vmware ESX Server on the same drive(but on different partition, boot menu is not coming. It is just booting Vmware only. Pls... (1 Reply)
Discussion started by: vikas027
1 Replies

5. Solaris

Self ssl alternate in Solaris

Instead of using an external Certification Authority CA such as Verisgn, in windows I have been told there is something called self ssl ( The server is its own Certification Authority) In Solaris is there such an alternate? In need it for apache. Much appreciate for any guidence. Thanks (2 Replies)
Discussion started by: Tirmazi
2 Replies

6. UNIX for Advanced & Expert Users

Timeout waiting for arp/rarp error

hello folks, I am trying to install solaris 10 through network using jumpstart but the thing is i am facing problem with the following message problem Timeout waiting for arp/rarp i made sure everything correct as /etc/hosts and /etc/ethers cables are connected, plz anyone help me out (7 Replies)
Discussion started by: solar10
7 Replies

7. Solaris

Solaris 9 & JetDirect

I'm working on a Solaris 9 Sun Blade and could do with some tips. I've been told JetDirect is already installed and running on this machine. There are two laser printers currently functioning off this machine and I can see entries for both in /etc/hosts with fixed IP's as netprinter1 &... (1 Reply)
Discussion started by: KenLynch
1 Replies

8. IP Networking

about RARP

Is a separate frame type field required for RARP? Could the same value be used for ARP and RARP 0x0806? thanks in advance. (1 Reply)
Discussion started by: kavitha rao
1 Replies

9. Solaris

Solaris 2.6 looking for ARP/RARP packet

Hi Everybody :) This is my first post concerning Solaris 2.6 trying to boot on a Tadpole SparcBook 3. I bought the laptop from somebody who configured it for his network. For the moment I want it as a non-networked standalone machine, or at least have that option. On trying to boot I get an... (0 Replies)
Discussion started by: JuBiLeE_50_05
0 Replies

10. Solaris

Solaris 10 alternate ways of starting legacy scripts

Scenario: I have installed a service. When I start it by running /etc/init.d/<service> start it generates a massive amount of audit data (auditd) in /var/audit. So much so that running the service for any length of time is inadvisable due to overhead. However if I reboot the system the... (6 Replies)
Discussion started by: penguinpanzer
6 Replies
RARP(8) 						     Linux Programmer's Manual							   RARP(8)

NAME
rarp - manipulate the system RARP table SYNOPSIS
rarp [-V] [--version] [-h] [--help] rarp -a rarp [-v] -d hostname ... rarp [-v] [-t type] -s hostname hw_addr NOTE
This program is obsolete. From version 2.3, the Linux kernel no longer contains RARP support. For a replacement RARP daemon, see ftp://ftp.dementia.org/pub/net-tools DESCRIPTION
Rarp manipulates the kernel's RARP table in various ways. The primary options are clearing an address mapping entry and manually setting up one. For debugging purposes, the rarp program also allows a complete dump of the RARP table. OPTIONS
-V Display the version of RARP in use. -v Tell the user what is going on by being verbose. -t type When setting or reading the RARP table, this optional parameter tells rarp which class of entries it should check for. The default value of this parameter is ether (i.e. hardware code 0x01 for IEEE 802.3 10Mbps Ethernet . Other values might include network tech- nologies such as AX.25 (ax25) and NET/ROM (netrom). -a --list Lists the entries in the RARP table. -d hostname --delete hostname Remove all RARP entries for the specified host. -s hostname hw_addr --set hostname hw_addr Create a RARP address mapping entry for host hostname with hardware address set to hw_addr class, but for most classes one can assume that the usual presentation can be used. For the Ethernet class, this is 6 bytes in hexadecimal, separated by colons. WARNING
Some systems (notably older Suns) assume that the host replying to a RARP query can also provide other remote boot services. Therefore never gratuitously add rarp entries unless you wish to meet the wrath of the network administrator. FILES
/proc/net/rarp, SEE ALSO
arp(8), route(8), ifconfig(8), netstat(8) AUTHORS
Ross D. Martin, <martin@trcsun3.eas.asu.edu> Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> Phil Blundell, <Philip.Blundell@pobox.com> net-tools 4 August 1997 RARP(8)
All times are GMT -4. The time now is 09:16 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy