|
|
Sponsored Content
Top Forums
UNIX for Dummies Questions & Answers
finally got online but it only lasted about 30 min. why???
Post 7530 by bigalex222 on Thursday 27th of September 2001 12:51:37 PM
09-27-2001
You should try running kudzu. If you have a PnP ethernet card in your system, it should detect it. Let me know what distribution of Linux you are running, too.
It shouldn't matter that you changed fonts or background colors, or even that you rebooted into Windows. Maybe when you ran netconf it turned on a daemon that didn't previously start up at system boot. I'd try running kudzu, and if it detects your ethernet card, I'd run netconf again.
It shouldn't matter that you changed fonts or background colors, or even that you rebooted into Windows. Maybe when you ran netconf it turned on a daemon that didn't previously start up at system boot. I'd try running kudzu, and if it detects your ethernet card, I'd run netconf again.
|
|
LEARN ABOUT OPENDARWIN
liebert
LIEBERT(8) NUT Manual LIEBERT(8) NAME
liebert - Driver for Liebert contact-closure UPS equipment NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver. EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5). BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work. There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver. SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 LIEBERT(8)