Unix Imaging for Redundancy Post: 7427

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Imaging of SCO-UNIX box

Does anyone know of any good imaging tools that can be used to create an image of a Sco-Unix box?

2. UNIX for Advanced & Expert Users

Port Redundancy

Dears, I have server has two port's(Enet0,Enet1) what I want as follows: Make the two port's has same IP address where, if the port Enet0 became down automaticly Enet1 become up :confused: . Amen

3. UNIX for Advanced & Expert Users

network redundancy with software

Here we want to implement the network redundancy on UNIX with the software. The two network interface cards are configured on the UNIX node,once one card is down or unnormal,the other can take over. Those aplications that used the tcp ,udp,multicast protocol can also been switched at the same...

4. UNIX for Dummies Questions & Answers

email redundancy between two servers

We have had some email outages in the last few months and my boss is asking is it worth going with one of those email redundancy/filtering sites. The thing is, we have a backup server on a remote location, so I am pretty sure we can set something up with what we have already. At the moment...

5. Red Hat

Imaging solution?

Can anyone recommend an imaging solution for RedHat Linux that would allow base imaging with the ability to do incremental updates and encryption? I know Acronis has a version available, but it is rather pricey. Thanks.

6. Solaris

dd - imaging drives. Oh boy!

Hello, Yes, it's me again. Running around getting this done! My current problem is I'm trying to image one drive 0 (/dev/dsk/c1t0d0s0) to drive 1 (/dev/dsk/c1t1d0s0). I know that drive1 came out of a Sun Server and it is a Sun drive. Solaris 10 recognized drive1 after the devfsadm command. The...

7. AIX

VIO Redundancy

Hi Guys, I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards... ...

8. AIX

VIOS redundancy....basics...

Have been learning a lot off late and am a little unclear about the VIOS setup particularly with regards to redundancy. Would appreciate your help. My question is very basic. Lets say I have setup a VIOS and 3 LPARs on only one hdd (non scsi). On what do I setup the second VIOS? Could I for...

9. AIX

Can EtherChannel be a redundancy config?

I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches. How to make this as a redundancy config? Current is if one physical network adapter down, the seond one will go through the network. but if...

LEARN ABOUT DEBIAN

ktoblzcheck

KTOBLZCHECK(1)						      General Commands Manual						    KTOBLZCHECK(1)

NAME

       ktoblzcheck - Check Account and BLZ (bank routing code)

SYNOPSIS

       ktoblzcheck [--returncode] [--file=<datafile>] <bank-id> <account-id>

DESCRIPTION

       This manual page documents briefly the ktoblzcheck application.

       ktoblzcheck  is	a program that will check a given account and blz for the bank being valid and the account being valid using some checksum
       calculations, if supported for that particular bank. The output is the clear-text name of the bank specified by <bank-id>, and whether  the
       given <account-id> is a valid account number at this bank.

OPTIONS

       <bank-id>
	      This is the Bankleitzahl (bank routing id), actually it is the account-id of that particular bank at the Deutsche Bundesbank.

       <account-id>
	      This  is the account number you wish to verify. If the checksum method of the bank specified by the <bank-id> is supported, you will
	      get the account-id verified, i.e. if it is a valid account-id at that particular bank.

       --returncode
	      If given, the result is returned via the returncode and no output on the	terminal.  The	following  returncodes	are  possible:	0:
	      account and bank are ok 1: unknown, e.g. checksum not implemented or such 2: account and/or bank not ok 3: bank not found

       --file=<datafile>
	      Specifies the file with the bankdata. This file can be obtained via the internet from the Deutsche Bundesbank on address
	      http://www.bundesbank.de/zahlungsverkehr/zahlungsverkehr_bankleitzahlen_download.php
	      Beware! This page is in German only.

BUGS

       No  bugs  are  known  at  this  time.  Only certain checksum algorythms are supported as of now, so please don't complain if you always get
       "unknown" as return value.

AUTHOR

       This manual page was written by Jens Gecius <jens@gecius.de> for the Debian GNU/Linux system. Authors  of  ktoblzcheck  are  Fabian  Kaiser
       <fabian@openhbci.de> and Christian Stimming <stimming@tuhh.de>.

								  August 3, 2003						    KTOBLZCHECK(1)