09-25-2001
One logical next troubleshooting step is to check with the OS vendor to see if their kernel support the SCSI host adapter you are trying to use & support the tape drive.
Let us know if you find a good link to this H/W documentation.
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk... (2 Replies)
Discussion started by: Solaris
2 Replies
2. Solaris
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
Discussion started by: Plain Person
4 Replies
3. Solaris
Okay. I admit I'm sort of a newbie in this regard.
I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing.
... (3 Replies)
Discussion started by: Plain Person
3 Replies
4. AIX
I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
11 Replies
5. SCO
I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies
6. UNIX and Linux Applications
Hey everyone.
I am trying to set up four sun servers. They all came with an adaptec storagetek raid liveCD. On the liveCD there is a utility called "Arcconf" which is supposed to be used to configure the storage arrays. The example given in their documentation uses this as an example:
ARCCONF... (2 Replies)
Discussion started by: msarro
2 Replies
7. Hardware
I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin.
There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
Do we need to set any jumpers before turning it on?
We already had... (0 Replies)
Discussion started by: orange47
0 Replies
8. SCO
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies
9. HP-UX
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
10. AIX
Hi,
We had a hardware problem with an IBM System p5 server, with AIX 5.2
We restore from a tape the last backup we had, but the server does not boot up as expected.
The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Discussion started by: trevian3969
12 Replies
mt(1) General Commands Manual mt(1)
NAME
mt - magnetic tape manipulating program
SYNOPSIS
tapename] command [count]
Obsolescent
tapename] command [count]
DESCRIPTION
is used to give commands to the tape drive. If tapename is not specified, the environment variable is used; if is not defined, the default
drive is used.
winds the tape in the requested direction (forward or backward), stopping after the specified count EOF marks or records are passed. If
count is not specified, one is assumed. Each EOF mark counts as one record. When winding backwards, the tape always stops at the BOT
marker, regardless of the number remaining in count.
accepts the following commands:
Write count EOF marks.
Forward space
count files.
Forward space
count records.
Backward space
count files.
Backward space
count records.
Rewind tape.
Rewind tape and go offline.
Seek to end of data (DDS and QIC drives only).
Write count setmarks (DDS drives only).
Forward space
count setmarks (DDS drives only).
Backward space
count setmarks (DDS drives only).
Print status information about the tape drive.
Reserve tape drive for sole use by the host issuing the
command (stape or estape driver only).
Release tape drive from sole use by the host issuing the
command (stape or estape driver only).
Spacing operations (back or forward space file or record) leave the tape positioned past the object being spaced to in the direction of
motion. That is, backspacing a file leaves the the tape positioned before the file mark, forward spacing a file leaves the tape positioned
after the file mark. This is consistent with all classical usage on tapes.
WARNINGS
Only raw, no-rewind Berkeley-type devices should be specified. This type of device will not reposition the tape upon close. An example of
such a device is or See mt(7) for more details.
It is possible to wind the tape beyond the EOT marker and off the end of the reel.
A reservation may only be cleared with a release by the host that issued the original reserve. In the event that the host that holds the
reservation is no longer available, the command may be used to reclaim the device by issuing a bus device reset. See st(1M) for more
details.
The reserve/release functionality can only be issued to drives using the or driver.
EXAMPLES
Rewind the tape associated with the device file or (if legacy DSF is disabled):
FILES
Raw magnetic tape interface (stape)
Raw magnetic tape interface (estape)
Default tape interface.
If legacy DSF is disabled, the default value is
AUTHOR
was developed by the University of California, Berkeley.
SEE ALSO
dd(1), st(1M), intro(7), mt(7).
mt(1)