Unix Imaging for Redundancy Post: 7139

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Imaging of SCO-UNIX box

Does anyone know of any good imaging tools that can be used to create an image of a Sco-Unix box?

2. UNIX for Advanced & Expert Users

Port Redundancy

Dears, I have server has two port's(Enet0,Enet1) what I want as follows: Make the two port's has same IP address where, if the port Enet0 became down automaticly Enet1 become up :confused: . Amen

3. UNIX for Advanced & Expert Users

network redundancy with software

Here we want to implement the network redundancy on UNIX with the software. The two network interface cards are configured on the UNIX node,once one card is down or unnormal,the other can take over. Those aplications that used the tcp ,udp,multicast protocol can also been switched at the same...

4. UNIX for Dummies Questions & Answers

email redundancy between two servers

We have had some email outages in the last few months and my boss is asking is it worth going with one of those email redundancy/filtering sites. The thing is, we have a backup server on a remote location, so I am pretty sure we can set something up with what we have already. At the moment...

5. Red Hat

Imaging solution?

Can anyone recommend an imaging solution for RedHat Linux that would allow base imaging with the ability to do incremental updates and encryption? I know Acronis has a version available, but it is rather pricey. Thanks.

6. Solaris

dd - imaging drives. Oh boy!

Hello, Yes, it's me again. Running around getting this done! My current problem is I'm trying to image one drive 0 (/dev/dsk/c1t0d0s0) to drive 1 (/dev/dsk/c1t1d0s0). I know that drive1 came out of a Sun Server and it is a Sun drive. Solaris 10 recognized drive1 after the devfsadm command. The...

7. AIX

VIO Redundancy

Hi Guys, I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards... ...

8. AIX

VIOS redundancy....basics...

Have been learning a lot off late and am a little unclear about the VIOS setup particularly with regards to redundancy. Would appreciate your help. My question is very basic. Lets say I have setup a VIOS and 3 LPARs on only one hdd (non scsi). On what do I setup the second VIOS? Could I for...

9. AIX

Can EtherChannel be a redundancy config?

I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches. How to make this as a redundancy config? Current is if one physical network adapter down, the seond one will go through the network. but if...

LEARN ABOUT DEBIAN

remote-tty

REMOTE-TTY(1)						      General Commands Manual						     REMOTE-TTY(1)

NAME

       remote-tty - connect to a ttysrv serial console instance

SYNOPSIS

       remote-tty [-l LoginName] [-7] [-r] socket

DESCRIPTION

       remote-tty  is  the  frontend  for the remote-tty daemon. It is normally invoked using rconsole.  It connects to the backend ttysrv process
       over a Unix socket and allows the user to view what's happening on the serial console and interact with it.

OPTIONS

       socket The full path to the Unix socket for the ttysrv instance to connect to.

       -l loginname
	      Specify the login name to use. Defaults to the username if not specified.

       -r     Set restricted mode; don't allow changing of logging status, suspending of remote-tty or setting of line options.

       -7     Set 7bit mode.

SEE ALSO

       rconsole(1), remote-tty(1), ttysrv(8).

AUTHOR

       rtty was written by Paul Vixie <vixie@isc.org>. This manual page was written by Jonathan McDowell <noodles@earth.li> for the Debian project
       (but may be used by others).

								   May 23, 2006 						     REMOTE-TTY(1)