09-19-2001
Well, I figured out the imaging part. The dd command does work, it just takes such a long time I didn't think it was working. I let it run overnight and it finished. Must have taken several hours though. So it looks like using dd for imaging hard drives is possible, just not very practicle.
Having tried a emulating a raid setup with IDE yet. I'll get to that as soon as I have the time and resources. If anyone else has tried it let me know!
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Does anyone know of any good imaging tools that can be used to create an image of a Sco-Unix box? (2 Replies)
Discussion started by: gmrfh1
2 Replies
2. UNIX for Advanced & Expert Users
Dears,
I have server has two port's(Enet0,Enet1) what I want as follows:
Make the two port's has same IP address
where, if the port Enet0 became down automaticly Enet1 become up :confused: .
Amen (4 Replies)
Discussion started by: amen00
4 Replies
3. UNIX for Advanced & Expert Users
Here we want to implement the network redundancy on UNIX with the software.
The two network interface cards are configured on the UNIX node,once one card is down or unnormal,the other can take over. Those aplications that used the tcp ,udp,multicast protocol can also been switched at the same... (2 Replies)
Discussion started by: Frank2004
2 Replies
4. UNIX for Dummies Questions & Answers
We have had some email outages in the last few months and my boss is asking is it worth going with one of those email redundancy/filtering sites. The thing is, we have a backup server on a remote location, so I am pretty sure we can set something up with what we have already.
At the moment... (1 Reply)
Discussion started by: edzillion
1 Replies
5. Red Hat
Can anyone recommend an imaging solution for RedHat Linux that would allow base imaging with the ability to do incremental updates and encryption? I know Acronis has a version available, but it is rather pricey.
Thanks. (0 Replies)
Discussion started by: here2learn
0 Replies
6. Solaris
Hello,
Yes, it's me again. Running around getting this done! My current problem is I'm trying to image one drive 0 (/dev/dsk/c1t0d0s0) to drive 1 (/dev/dsk/c1t1d0s0). I know that drive1 came out of a Sun Server and it is a Sun drive. Solaris 10 recognized drive1 after the devfsadm command. The... (8 Replies)
Discussion started by: adelsin
8 Replies
7. AIX
Hi Guys,
I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards...
... (2 Replies)
Discussion started by: kkeng808
2 Replies
8. AIX
Have been learning a lot off late and am a little unclear about the VIOS setup particularly with regards to redundancy. Would appreciate your help.
My question is very basic. Lets say I have setup a VIOS and 3 LPARs on only one hdd (non scsi). On what do I setup the second VIOS? Could I for... (7 Replies)
Discussion started by: theaixeman
7 Replies
9. AIX
I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches.
How to make this as a redundancy config?
Current is if one physical network adapter down, the seond one will go through the network. but if... (2 Replies)
Discussion started by: rainbow_bean
2 Replies
LEARN ABOUT FREEBSD
conscontrol
CONSCONTROL(8) BSD System Manager's Manual CONSCONTROL(8)
NAME
conscontrol -- control physical console devices
SYNOPSIS
conscontrol [list]
conscontrol mute on | off
conscontrol add | delete console
conscontrol set | unset console
DESCRIPTION
The conscontrol utility is used to examine and modify the physical devices which back the virtual console devices. If no arguments (or only
the list command) are specified, the current console settings are shown.
There are two types of logical consoles; a high level console which is represented by /dev/console, and a low level console. The low level
console is used for kernel printf(9) and ddb(4) debugger support, while the high level console is used by user programs like syslogd(8).
Multiple device support is implemented only for the low level console; the high level console is set to the first device in the console list.
Multiple console support may be invoked by passing the kernel the -D flag from the boot loader, or by using conscontrol to change the list of
console devices after the system has booted.
The following options are available:
add | delete console
Add or delete a physical device from the logical console. The device must support low-level console operations. Adding a device
will place it at the front of the list of console devices; the first device is used for the high level console.
The console argument is the name of a console device in /dev; the name of the directory may be omitted.
mute on | off
Change the state of console muting. All console output is suppressed when console muting is on.
set | unset console
Set or unset the virtual console. When unset, output from the system, such as the kernel printf(9), always goes out to the real main
console. When set, it goes to another. This is an interface to the tty ioctl TIOCCONS.
SEE ALSO
sio(4), syscons(4), tty(4), vt(4), boot(8), loader(8)
HISTORY
The conscontrol utility first appeared in FreeBSD 5.0.
AUTHORS
Jonathan Lemon
BSD
April 14, 2011 BSD