XIRC2PS_CS(4)						     Kernel Interfaces Manual						     XIRC2PS_CS(4)

NAME

       xirc2ps_cs - Xircom CE2ps (and newer) device driver

SYNOPSIS

       insmod xirc2ps_cs.o [pc_debug=n] [full_duplex=n] [irq_list=i,j,...]  [if_port=n] [lockup_hack=n]

DESCRIPTION

       xirc2ps_cs  is  the low-level Card Services driver for the Xircom 16-bit PCMCIA ethernet adapters.  When this driver is attached to a card,
       it allocates the next available ethernet device.

PARAMETERS

       pc_debug=n
	      Selects the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.  A  non-zero
	      value enables debugging.

       if_port=n
	      Selects  the transceiver type, for some CE3B-100 cards that lack the ability to autonegotiate.  For such cards, a value of 1 selects
	      10baseT, and 4 selects 100baseT.

       full_duplex=n
	      Selects full duplex mode.  The default is 0 (half duplex).

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

       lockup_hack=n
	      Enables a hack to avoid lockups on some cards.	Use this only if you really have lockup problems with your card.

SEE ALSO

       cardmgr(8), pcmcia(5).

BUGS

       Please report to <xircom-bugs@isil.d.shuttle.de>

AUTHOR

       Werner Koch <werner.koch@guug.de>

							     1.5  1998/09/15 12:40:59						     XIRC2PS_CS(4)