Add PCI ethernet card? Post: 61612

10 More Discussions You Might Find Interesting

1. AIX

PCI Ethernet Cards for IBM RISC 6000 - B50's

I am trying to find PCI Ethernet cards that are compatible with the IBM RISC 6000 - B50 Power PC. None of the regular NIC's seem to have AIX drivers. Does anyone know of AIX drivers for standard PCI Ethernet NIC's or a non IBM NIC that works with the Model B50 at 10/100 MB ?

2. AIX

PCI Ethernet NIC's for IBM RISC 600 Model B50

I am trying to locate a non IBM PCI Ethernet card that will work with the Model B50 RISC box. Alternatively, I need to find AIX drivers for standard PCI Ethernet NIC's ?.

3. SuSE

HCF win modem PCI card

Hey all, ive got redhat 80 and trying to install a HCF win modem. Ive intsalled the drivers from linuxant.com using the rpm - i packagename.rpm command, but i still cant use the modem any suggestions ?

4. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

5. UNIX for Dummies Questions & Answers

disable power management to a PCI card

I have a US Robotics USR5416 wireless networking card and everytime after hours of inactivity the cardseems to shutdown. I read somewhere the it does not support power management. Is there a way to disable power management to that particular PCI card?

6. IP Networking

ethernet card

What command do I use to show mw the ethernet card, I have tried ipconfig -a

7. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

8. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000...

9. Solaris

Can't ping new PCI LAN card x4270_m2

Hi, I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10). I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip...

10. AIX

AIX -How to find which NIC is on which PCI card

Hi All, How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v Any idea? Thanks.

LEARN ABOUT REDHAT

pcitweak

PCITWEAK(1)						      General Commands Manual						       PCITWEAK(1)

NAME

       pcitweak - read/write PCI config space

SYNOPSIS

       pcitweak -l
       pcitweak -r PCI-ID [-b|-h] offset
       pcitweak -w PCI-ID [-b|-h] offset value

DESCRIPTION

       Pcitweak  is  a utility that can be used to examine or change registers in the PCI configuration space.	On most platfoms pcitweak can only
       be run by the root user.

OPTIONS

       -l      Probe the PCI buses and print a line for each detected device.  Each line contains the  bus  location  (bus:device:function),  chip
	       vendor/device, card (subsystem) vendor/card, revision, class and header type.  All values printed are in hexadecimal.

       -r PCI-ID
	       Read  the PCI configuration space register at offset for the PCI device at bus location PCI-ID.	PCI-ID should be given in the form
	       bus:device:function, with each value in hexadecimal.  By default, a 32-bit register is read.

       -w PCI-ID
	       Write value to the PCI configuration space register at offset for the PCI device at bus location PCI-ID.  PCI-ID should be given in
	       the form bus:device:function, with each value in hexadecimal.  By default, a 32-bit register is written.

       -b      Read or write an 8-bit value (byte).

       -h      Read or write a 16-bit value (halfword).

SEE ALSO

       scanpci(1)

AUTHORS

       David Dawes (dawes@xfree86.org).

XFree86 						       Version Version 4.3.0						       PCITWEAK(1)