I've had a VXFS filesystem get corrupted and now it won't mount.
Bummer - I hate when that happens.
Quote:
Can I run a fsck -y on the raw disk device
It matters what you mean by 'raw disk device' - If this was a vertias filesystem that was mounted as a partition, fsck won't be a problem. If this was a veritas filesystem raw Sybase disk then fsck I believe would fail (since it's not a real filesystem but just a Sybase raw partition controlled by Veritas).
Quote:
or should something be done within veritas? Veritas does not see the disk at the moment.
Hopefully you had saved in the past the information needed (I don't recall all of it off the top of my head) -
If the drive failed, then there is a procedure to follow within vxdiskadm of removing and installing - but you should have the old info to know exactly which device you are dealing with.
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
I have a bogus disk that keeps showing up as failed from vxdisk list
- - disk hpdg failed was:c2t0d11s2
There isnt any c2 devices on the system:
# ls /dev/dsk/c2*
/dev/dsk/c2*: No such file or directory
# ls /dev/rdsk/c2*
/dev/rdsk/c2*: No such file or... (3 Replies)
recently this sunfire 280R (solaris 10) is having problme, it was able to boot up, then all suddent, it failed, and I can't even mount the first disk which contains root partition when I boot up from cdrom.
2 X 36G hard drive,
I scan first hard drive by "read", there is no bad block. The... (2 Replies)
I am trying to write a kornshell script that will automatically create veritas disk groups. However, the only utility that I can find that will create the diskgroup is vxdiskadd, which prompts with interactive questions. I've tried to pass the answers through to vxdiskadd, but I receive the... (0 Replies)
People i have an a storage i create two virtual disk 1 y 2.
In the virtual disk 1 i configure 8 volumes and in the Vd2 configure 5 volumes.
Now i want to create a disk group called Prod2 y Dev2 but when i go to vxdiskadm and i choose add disk o encapusalte when i press list to list the disk... (0 Replies)
Hi,
I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk:
# vxdctl enable
# vxdisk list c1t0d0s2
Device: c1t0d0s2
devicetag: c1t0d0
type: auto
flags: online error private autoconfig... (1 Reply)
Need help getting all disk devices back on node 2 the same as node 1.
Recently Veritas and/or Sun cluster got wrecked on my 2 node Sun cluster after installing the latest patch cluster. I backed out the patches and then node 2 could see only half of the devices and Veritas drives (though format... (0 Replies)
NOTICE: /: unexpected free inode 45262, run fsck(1M)
fsck: cannot open vfstab
Looks like /etc/vfstab (and a few other files has gone)
Any ideas?
Boot from cd, mount disk and recreate vfstab so that I can run fsck? (1 Reply)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT MOJAVE
quotacheck
QUOTACHECK(8) BSD System Manager's Manual QUOTACHECK(8)NAME
quotacheck -- filesystem quota consistency checker
SYNOPSIS
quotacheck [-g] [-u] [-v] filesystem ...
quotacheck [-g] [-u] [-v] -a
DESCRIPTION
Quotacheck examines each filesystem, builds a table of current disk usage, and compares this table against that recorded in the disk quota
file for the filesystem. If any inconsistencies are detected, both the quota file and the current system copy of the incorrect quotas are
updated (the latter only occurs if an active filesystem is checked). By default both user and group quotas are checked.
Available options:
-a If the -a flag is supplied in place of any filesystem names, quotacheck will check all the read-write filesystems with an existing
mount option file at its root. The mount option file specifies the types of quotas that are to be checked.
-g Only group quotas are checked. The mount option file, .quota.ops.group, must exist at the root of the filesystem.
-u Only user quotas are checked. The mount option file, .quota.ops.user, must exist at the root of the filesystem.
-v quotacheck reports discrepancies between the calculated and recorded disk quotas.
Specifying both -g and -u is equivalent to the default. Parallel passes are run on the filesystems required, in an identical fashion to
fsck(8).
Normally quotacheck operates silently.
Quotacheck expects each filesystem being checked to have quota data files named .quota.user and/or .quota.group located at the filesystem
root. If a binary data file is not present, quotacheck will create it. The default filename and root location cannot be overridden.
Quotacheck is normally run at fsck time.
Quotacheck accesses the raw device in calculating the actual disk usage for each user. Thus, the filesystems checked should be quiescent
while quotacheck is running.
FILES
Each of the following quota files is located at the root of the mounted filesystem. The mount option files are empty files whose existence
indicates that quotas are to be enabled for that filesystem. The binary data files will be created by quotacheck, if they don't already
exist.
.quota.user data file containing user quotas
.quota.group data file containing group quotas
.quota.ops.user mount option file used to enable user quotas
.quota.ops.group mount option file used to enable group quotas
SEE ALSO quota(1), quotactl(2), edquota(8), fsck(8), quotaon(8), repquota(8)HISTORY
The quotacheck command appeared in 4.2BSD.
4.2 Berkeley Distribution October 17, 2002 4.2 Berkeley Distribution