REMOTE(5)							File Formats Manual							 REMOTE(5)

NAME

       remote - remote host description file

DESCRIPTION

       The  systems known by tip(1C) and their attributes are stored in an ASCII file which is structured somewhat like the termcap(5) file.  Each
       line in the file provides a description for a single system.  Fields are separated by a colon (``:'').  Lines ending in a  character  with
       an immediately following newline are continued on the next line.

       The  first entry is the name(s) of the host system.  If there is more than one name for a system, the names are separated by vertical bars.
       After the name of the system comes the fields of the description.  A field name followed by an `=' sign indicates a string  value  follows.
       A field name followed by a `#' sign indicates a following numeric value.

       Entries	named  ``tip*'' and ``cu*'' are used as default entries by tip, and the cu interface to tip, as follows.  When tip is invoked with
       only a phone number, it looks for an entry of the form ``tip300'', where 300 is the baud rate with which the  connection  is  to  be  made.
       When the cu interface is used, entries of the form ``cu300'' are used.

CAPABILITIES

       Capabilities  are either strings (str), numbers (num), or boolean flags (bool).	A string capability is specified by capability=value; e.g.
       ``dv=/dev/harris''.  A numeric capability is specified by capability#value; e.g. ``xa#99''.  A boolean capability is  specified	by  simply
       listing the capability.

       at   (str) Auto call unit type.

       br   (num)  The	baud  rate  used in establishing a connection to the remote host.  This is a decimal number.  The default baud rate is 300
	    baud.

       cm   (str) An initial connection message to be sent to the remote host.	For example, if a host is  reached  through  port  selector,  this
	    might be set to the appropriate sequence required to switch to the host.

       cu   (str) Call unit if making a phone call.  Default is the same as the `dv' field.

       di   (str) Disconnect message sent to the host when a disconnect is requested by the user.

       du   (bool) This host is on a dial-up line.

       dv   (str) UNIX device(s) to open to establish a connection.  If this file refers to a terminal line, tip(1C) attempts to perform an exclu-
	    sive open on the device to insure only one user at a time has access to the port.

       el   (str) Characters marking an end-of-line.  The default is NULL.  `~' escapes are only recognized by tip after one of the characters	in
	    `el', or after a carriage-return.

       fs   (str) Frame size for transfers.  The default frame size is equal to BUFSIZ.

       hd   (bool) The host uses half-duplex communication, local echo should be performed.

       ie   (str) Input end-of-file marks.  The default is NULL.

       oe   (str) Output end-of-file string.  The default is NULL.  When tip is transferring a file, this string is sent at end-of-file.

       pa   (str)  The	type of parity to use when sending data to the host.  This may be one of ``even'', ``odd'', ``none'', ``zero'' (always set
	    bit 8 to zero), ``one'' (always set bit 8 to 1).  The default is even parity.

       pn   (str) Telephone number(s) for this host.  If the telephone number field contains an @ sign, tip searches the file /etc/phones file for
	    a list of telephone numbers; c.f.  phones(5).

       tc   (str)  Indicates that the list of capabilities is continued in the named description.  This is used primarily to share common capabil-
	    ity information.

       Here is a short example showing the use of the capability continuation feature:

       UNIX-1200:
	    :dv=/dev/cau0:el=^D^U^C^S^Q^O@:du:at=ventel:ie=#$%:oe=^D:br#1200:
       arpavax|ax:
	    :pn=7654321%:tc=UNIX-1200

FILES

       /etc/remote

SEE ALSO

       tip(1C), phones(5)

4.2 Berkeley Distribution					   May 15, 1985 							 REMOTE(5)