1. IP Networking

anyone available to help me config sgi octane to netscape and networking mac os X? i have three macs and one sgi. setup on a dsl netopia router. all 4 computers can ping each other by addresses and by names. all the macs can ping the router, but the sgi cannot ping the router, "network is... (0 Replies)

2. IP Networking

I have a linksys router BEFSR41. I am trying to connect two network.. one device has to route from one network of IP address 192.168.10.12 to go to a device on separate network with IP address 192.168.25.95. In the configuration LAN ip address by default it 192.168.1.1 If I define LAN IP to... (0 Replies)

3. Shell Programming and Scripting

All Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action.. if i do the telent and in perl script then .... e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip... (4 Replies)

4. IP Networking

I have an SGI running Irix 6.5 and I am trying to connect it to my home network that consists of two Windows PC's (Win 98SE and Win 2000) plus the SGI all connected to a Linksys router which is connected to my DSL modem. My ISP is Verizon DSL (Dynamic IP addressing.) All network lights are... (3 Replies)

5. IP Networking

I just sys-unconfigged my ultra sparc which is on my home network where I have 2 PCs attached. When I go to install Solaris 8, it asks various things re: networking. Specifically, when it asks for the IP addy for the DNS server, I input the info, but it barfs back "IP addy info not found". I... (10 Replies)

6. IP Networking

please help! I have a sun blade with 2 x nics configured, both on different subnets. The eri0 interface (192.168.0.100) is connected to my router (192.168.0.1), but if i try to ping the router, it times out. any suggestions are welcome - i noticed the 2 mac addresses are the same, i've set... (7 Replies)

7. Shell Programming and Scripting

I'm trying to use wget to submit a form. I have tried to dig out what is actually being "posted" and where, using tamperdata (see below). http://ubuntuforums.org/attachment.php?attachmentid=109123&d=1239224127 Here is my wget command: wget --http-user=xyz --http-password=xyz... (1 Reply)

8. IP Networking

Does anyone know if this router can restrict incoming traffic to specific IP addresses. There does not seem to be any information on Cisco's web site any more. ie Only 209.123.123.123 is allowed access to port 9100, which is redirected to 192.168.1.100 (1 Reply)

9. Cybersecurity

Hi I have very basic network settings in my home. Cable connected to my Linksys Wireless G router. My wife and I connect to that using our laptop. Yes. I did enable encryption to connect. Also my wireless printer is connected to that. For some reason, last night around 12:30 AM, the... (4 Replies)

10. UNIX for Dummies Questions & Answers

I configured my linux server with Static IP address out of the range of the DHCP linksys router, but cannot get on the internet. When I switch back to "Automatically obtain IP address" ..then I can get on the internet. Can comeone help with this. (2 Replies)