12-21-2004
Unix Sco 5.0.7 Raid Problems
Hello there guys ,
I have this problem , i have this hp smart array 641 raid card and i'm trying to install sco unix 5.0.7 and is says no root disk found right before the instalation is about to start.
I know that you have to load the driver befor the install bud i really cannot find the drivers.
I called hp to get support and they said that card will not support sco unix , i know that card will work because i have seen that card working fine with sco unix.
i went to hp website and it does not shows the drivers for unix sco. i guess that''s why the guy from hp could not helped me.
if any of you guys could let me know how to find those drivers and how to install it i will apreciate it.
thanks a lot guys.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I get the following when printing from a SCO Unix application
{ Who are you ?}
The user is printing to a printer on a network print sharing device
HP 500x.
I think this printer is shared via the Unix machine. How does
one set up printer sharing on Unix and access permissions
for them?
... (2 Replies)
Discussion started by: JoseHose
2 Replies
2. Filesystems, Disks and Memory
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than... (1 Reply)
Discussion started by: pko60
1 Replies
3. SCO
Happy new year guys.
I have a inspiron 5100 laptop "Dell"
When i'm trying to install SCO openserver 5.0.7 i get this error right after it goes thru the hardware bootup stage.
The error is (PANIC: wdsetparam: no device info for ctlr 1 drive 0
is ctlr 0 , drive 0 not... (0 Replies)
Discussion started by: josramon
0 Replies
4. UNIX for Dummies Questions & Answers
Hello there .
I have a unix box 5.0.06 , this is the error (Telnetd: All networks ports in use .
Can anyone tellme how to resolve this problem.
Thanks a lot . (2 Replies)
Discussion started by: josramon
2 Replies
5. SCO
I have several printers setup but nothing prints.
I get the following error email
Subject: Status of lp request aclj3-2297
Your request aclj3-2297 destined for aclj3
encountered an error while printing on printer aclj3.
Reason for failure:
cat: cannot open 0: No such file or... (1 Reply)
Discussion started by: Jessie Nand
1 Replies
6. UNIX for Dummies Questions & Answers
Hi,
I've got a really old system we use for call logging. The OS is SCO 3.2
uname -a output
SCO_SV bts7053 3.2 2 i386
the problem we are having is that its no longer doing its backups. The original problem was the tape drive, which has been replaced twice now. Because the company are... (1 Reply)
Discussion started by: johno12345
1 Replies
7. SCO
I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller .
how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6.
Plz help with any idea
karzon (1 Reply)
Discussion started by: karzon
1 Replies
8. SCO
Dear Team ,
how i can configure raid 1 (mirroring) using ide hdd in sco open unix 5
i have two 80gb identical hdd (same make/model)
thanx (0 Replies)
Discussion started by: sudhir69
0 Replies
9. SCO
SCO unix 5.0.5 - Suddently network lost & has to be reboot. I try to stop TCP & start TCP. but no connection. Any idea about that.
thanks (8 Replies)
Discussion started by: ajantha
8 Replies
10. SCO
Hi all,
A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password.
Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore.
I tried to boot with the CD Rom, then "Tools", then exit to... (7 Replies)
Discussion started by: thm2222
7 Replies
EX(4) BSD/i386 Kernel Interfaces Manual EX(4)
NAME
ex -- Ethernet device driver for the Intel EtherExpress Pro/10 and Pro/10+
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device ex
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_ex_load="YES"
DESCRIPTION
The ex driver provides support for Ethernet adapters based on the Intel i82595 chip.
On the ISA bus, the card will be searched for in the I/O address range 0x200 - 0x3a0. The IRQ will be read from the EEPROM on the card. For
correct operation Plug-N-Play support should be disabled.
On the PC Card bus, the card will be automatically recognized and configured.
HARDWARE
The ex driver supports the following Ethernet adapters:
o Intel EtherExpress Pro/10 ISA
o Intel EtherExpress Pro/10+ ISA
o Olicom OC2220 Ethernet PC Card
o Olicom OC2232 Ethernet/Modem PC Card
o Silicom Ethernet LAN PC Card
o Silicom EtherSerial LAN PC Card
DIAGNOSTICS
ex%d: Intel EtherExpress Pro/10, address %6D, connector %s The device probe found an installed card, and was able to correctly install the
device driver.
ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d The device probe detected that the board is configured for a different
interrupt than the one specified in the kernel configuration file.
ex%d: invalid IRQ. The device probe detected an invalid IRQ setting.
SEE ALSO
arp(4), netintro(4), ng_ether(4), ifconfig(8)
HISTORY
The ex device driver first appeared in FreeBSD 2.2.
AUTHORS
The ex device driver was written by Javier Martin Rueda. The PC Card attachment was written by Mitsuru ISAWAKI and Warner Losh. This manual
page was written by David E. O'Brien.
BUGS
Currently the driver does not support multicast.
The Silicom EtherSerial card's serial port does not currently work. The Olicom OC2232 PC Card should work with the ex driver, but is cur-
rently completely broken.
BSD
July 16, 2005 BSD