HPUX 10.20 and 11.00 commands Post: 5267

10 More Discussions You Might Find Interesting

1. HP-UX

HPUX config commands

Hi guys, Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem?

2. UNIX for Dummies Questions & Answers

New to HPUX

Hi, I am a SAP Basis admin recentely been asked to administer a HPUX server. Could someone recommend some good study material to learn with the Sap prespective. -carry

3. HP-UX

HPUX Hardware commands.

HI ALL, I am new tp HPUX and i am looking for command that will retive me the following information on HPUX: Chassis Name & Serial Number: Monitor Name BIOS Name EthernetPort Name IPEndpoint Name PointingDevice Name Keyboard NetworkPrinter Name LocalPrinter

4. Programming

code that reads commands from the standard i/p and executes the commands

Hello all, i've written a small piece of code that will read commands from standard input and executes the commands. Its working fine and is execting the commands well. Accepting arguments too. e.g #mkdir <name of the directory> The problem is that its not letting me change the directory i.e...

5. HP-UX

Need HPUX admin commands lost

Hi All Please somebody send me list of admin commands used for HPUX. Thanks Sunanda

6. Shell Programming and Scripting

Can BASH execute commands on a remote server when the commands are embedded in shell

I want to log into a remote server transfer over a new config and then backup the existing config, replace with the new config. I am not sure if I can do this with BASH scripting. I have set up password less login by adding my public key to authorized_keys file, it works. I am a little...

7. Shell Programming and Scripting

Need Script to Use CPUs on a HPUX server to simulate Workload Manager on HPUX.

I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas?

8. HP-UX

pwage-hpux-T for Trusted HPUX servers

I'm sharing this in case anybody needs it. Modified from the original solaris pwage script. This modified hpux script will check /etc/password file on hpux trusted systems search /tcb and grep the required u_succhg field. Calculate days to expiry and notify users via email. original solaris...

9. AIX

HACMP: difference between 'cl' commands and 'cli' commands

Hi all, I'm new in this forum. I'm looking for the difference between the HACMP commands with the prefix "cl" and "cli". The first type are under /usr/es/sbin/cluster/sbin directory and the second are under /usr/es/sbin/cluster/cspoc directory. I know that the first are called HACMP for AIX...

10. Shell Programming and Scripting

Hpux

Hello All Why is hpux is not much spoken in the unix/Linux platform. what is the disadvantes in HPUX Thanks, VJ

LEARN ABOUT OSF1

iptunnel

iptunnel(8)						      System Manager's Manual						       iptunnel(8)

NAME

       iptunnel - Creates, deletes, and displays configured tunnels

SYNOPSIS

       /usr/sbin/iptunnel  [operation] [args]

DESCRIPTION

       The  iptunnel  command creates configured tunnels for sending and receiving IPV6 or IPV4 packets that are encapsulated as the payload of an
       IPV4 datagram.

       The iptunnel command can perform one of the following operations: Creates a tunnel interface, which  you  must  subsequently  configure	by
       using the ifconfig command. The syntax of the create operation is as follows:

	      iptunnel create [-I int-name] [v4-dest] [v4-src]

	      Specifies  the  interface unit of the tunnel to be created. This is an optional parameter.  The int-name parameter has the following
	      form: iptx, where x is the interface unit number. By default, the interface name selected for the tunnel is iptx+1, or the value	of
	      the  interface  unit  number  of the last tunnel created plus 1.	Specifies the remote end-point to which a tunnel is to be created.
	      Sets the IPV4 source address in the encapsulating header.  The tunnel is enabled (packets are sent/received on the tunnel)  only	if
	      v4-src  is  a valid address on the system.  This is an optional parameter.  Deletes a tunnel interface.  You must disable the tunnel
	      before you can delete it by executing the following command: # ifconfig tunnel name down	delete abort Shows the	tunnel	attributes
	      (name, tunnel end points, next hop for tunneled packets).

EXAMPLES

       To create a tunnel from hobbes to calvin, enter: # iptunnel create -I ipt5 calvin  ipt5  iftype 208 src 16.140.16.86 dst 16.140.16.91

       To display the tunnel attributes, enter: # iptunnel show ipt5 interface ipt5 src 16.140.16.86 dst 16.140.16.91 gate 16.140.16.86 To config-
       uring the tunnel to encapsulate IPv6 packets, enter: # ifconfig ipt5 ipv6 up

	      IPv6 packets will be sent as payloads of IPv4 datagrams from 16.140.16.86 to 16.140.16.91.

	      The tunnel may also be used to send IPV4 packets encapsulated within IPV4 headers as follows: # ifconfig	ipt5  10.10.80.60  netmask
	      255.255.255.0

	      To verify the previous command, enter: # ifconfig ipt5 ipt5: flags=4c1<UP,RUNNING,NOARP,MULTICAST>
		   16.140.16.86 --> 16.140.16.91
		   rxmt 1000, reach time 30000, dad tries 1, mtu 1280, hops 64, token len 64
		   inet 10.10.80.60 netmask ffffff00  ipmtu 1280
		   inet6  fe80::108c:1056  To  deleting the tunnel, enter: # ifconfig ipt5 down delete abort ipt5: delete inet address 10.10.80.60
	      10.10.80.60: aborting 0 tcp connection(s)

	      Then, enter: # iptunnel delete ipt5 interface ipt5 deleted

SEE ALSO

       Commands: ifconfig(8).

       RFC 2003, IP Encapsulation within IP, Perkins, C., October 1996

																       iptunnel(8)

10 More Discussions You Might Find Interesting

1. HP-UX

HPUX config commands

Discussion started by: giriplug

2. UNIX for Dummies Questions & Answers

New to HPUX

Discussion started by: carryclare

3. HP-UX

HPUX Hardware commands.

Discussion started by: Veenak15

4. Programming

code that reads commands from the standard i/p and executes the commands

Discussion started by: Phrozen Smoke