Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Dell Poweredge 2400 / 533
UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks Dell Poweredge 2400 / 533 Post 51833 by happy*nix on Wednesday 2nd of June 2004 11:31:40 PM
Old 06-03-2004
Gentoo 2004.1 AMD64
RIG: Nvidia Gforce3 250
AMD Athlon64 2800 (412MHz FSB)
2GB PC3200 RAM (2, 1GB DIMMS)
Hitachi 160GB SATA Drives
3ware escalade RAID controller Raid5
GENTOO 2004.1 stage2 install 64bit

CHOST="x86_64-pc-linux-gnu"
CFLAGS="-DTIME -msse -msse2 -m3dnow -m64 -O2"

Results:
Quote:
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux VES-bear 2.6.5-gentoo-r1 #2 Sat May 22 21:23:30 Local time zone must be set--see zic manu x86_64 4 GNU/Linux
Start Benchmark Run: Mon May 31 21:52:23 CDT 2004
13 interactive users.
Dhrystone 2 without register variables 5398108.6 lps (10 secs, 6 samples)
Dhrystone 2 using register variables 5360057.0 lps (10 secs, 6 samples)
Arithmetic Test (type = arithoh) 8559222.0 lps (10 secs, 6 samples)
Arithmetic Test (type = register) 384388.5 lps (10 secs, 6 samples)
Arithmetic Test (type = short) 376582.4 lps (10 secs, 6 samples)
Arithmetic Test (type = int) 384470.8 lps (10 secs, 6 samples)
Arithmetic Test (type = long) 224603.1 lps (10 secs, 6 samples)
Arithmetic Test (type = float) 976770.2 lps (10 secs, 6 samples)
Arithmetic Test (type = double) 881900.2 lps (10 secs, 6 samples)
System Call Overhead Test 1833903.8 lps (10 secs, 6 samples)
Pipe Throughput Test 1192333.6 lps (10 secs, 6 samples)
Pipe-based Context Switching Test no measured results
Process Creation Test 11411.8 lps (10 secs, 6 samples)
Execl Throughput Test no measured results
File Read (10 seconds) 4920490.0 KBps (10 secs, 6 samples)
File Write (10 seconds) 613887.0 KBps (10 secs, 6 samples)
File Copy (10 seconds) 101231.0 KBps (10 secs, 6 samples)
File Read (30 seconds) 4949798.0 KBps (30 secs, 6 samples)
File Write (30 seconds) 632218.0 KBps (30 secs, 6 samples)
File Copy (30 seconds) 45708.0 KBps (30 secs, 6 samples)
C Compiler Test 1193.7 lpm (60 secs, 3 samples)
Shell scripts (1 concurrent) 5188.3 lpm (60 secs, 3 samples)
Shell scripts (2 concurrent) 2735.7 lpm (60 secs, 3 samples)
Shell scripts (4 concurrent) 1405.3 lpm (60 secs, 3 samples)
Shell scripts (8 concurrent) 709.3 lpm (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places 160117.5 lpm (60 secs, 6 samples)
Recursion Test--Tower of Hanoi 90029.9 lps (10 secs, 6 samples)


INDEX VALUES
TEST BASELINE RESULT INDEX

Arithmetic Test (type = double) 2541.7 881900.2 347.0
Dhrystone 2 without register variables 22366.3 5398108.6 241.4
Execl Throughput Test 16.5 0.0 0.0
File Copy (30 seconds) 179.0 45708.0 255.4
Pipe-based Context Switching Test 1318.5 0.0 0.0
Shell scripts (8 concurrent) 4.0 709.3 177.3
=========
SUM of 6 items 1021.0
AVERAGE 170.2
 

8 More Discussions You Might Find Interesting

1. Linux Benchmarks

Dell Dual Xeon PowerEdge 4600

Notes: System Configuration: Dell Computer Corporation PowerEdge 4600 (4 X Intel(R) XEON(TM) CPU 2.00GHz 1988.782 MHz) hyperthreaded System clock frequency: 99.0827 MHz Memory size (approximate): 2559 Megabytes ========================= CPUs ======================== CPU # CPU... (0 Replies)
Discussion started by: tnorth
0 Replies

2. Solaris

Installing Solaris 10 on Dell PowerEdge 2800

hi, i am trying to install solaris 10 (on 4 cd's downloaded from the sun website) on my dell poweredge 2800 server. 2 xeon processors, 2GB of RAM and 2 NICS, 73 GB SCSI (maxtor ultra320, 3.5 series), i can give more details on request... the installation crashes when trying to detect the NICS... (0 Replies)
Discussion started by: xinugeek
0 Replies

3. Red Hat

Installing RedHat 8.0 onto Dell PowerEdge SC1425 - hdc: status error: status = 0x58

I have successfully installed RedHat 8.0 onto a Dell PowerEdge SC1425 today. This server has two SATA hard drives, and an IDE DVD-ROM drive. Using the following kernel parameters, i successfully installed across both hard drives from CD: ide0=0x1f0,0x3f6,14 vga=791 resolution=1024x768 expert... (5 Replies)
Discussion started by: fishsponge
5 Replies

4. Filesystems, Disks and Memory

Linux and Dell 1500sc Poweredge Server

Does anybody no how to get around the fact that the Red Hat installation does not see the SCSI hard drives. It lets you manually pick the proper device, but still fails saying no drive detected (or something to that effect). I was going to install windows 2003 Server and use VMware...but again,... (1 Reply)
Discussion started by: Fatflea
1 Replies

5. UNIX for Dummies Questions & Answers

Stange problem Dell PowerEdge 1950/ Boradcom Netextreme NIC

I have 2 Dell Poweredge 1950 servers running . I have been having intermittent performance issues with the NIC cards on one of them. The two servers are identical and are running the same operating system. The server that has the issue is on the DMZ on a a static IP and is hosting a website. ... (0 Replies)
Discussion started by: skotapal
0 Replies

6. SCO

Continueing relyability problems with SCO 6.0 on Dell Poweredge 1800 with PERC DC4.

Hello all, I'am experiencing weird relyability problems with a SCO 6.0 Openserver server that runs on a Dell Poweredge 1800 equipped with a PERC DC4 raid controller and 4 36 GB 15 K rpm hot swappable scsi harddisks. It runs a RAID 10 configuration. It uses the mega hba, Revision 8.03a Release... (1 Reply)
Discussion started by: frederik1
1 Replies

7. Programming

/dev/mem on Dell Poweredge

Hi, I have a C++ program to access /dev/mem and retrieve details like Vendor, Manufacturer details of the motherboard. This works fine on all the machines except for on Dell Poweredge 2850,1950... machines. I receive a 'EFAULT' when I try to access /dev/mem on these servers. I suspect some... (1 Reply)
Discussion started by: ragisreekanth
1 Replies

8. SCO

Dell PowerEdge 2600 tape backup

I was asked to get a Dell PowerEdge 2600 server, out of warranty, running SCO 3.2v5.06 to perform a full backup. I spent hours researching and preparing a strategy only to fail on-site. The only device names in /dev for a tape drive were /dev/xStp0 /dev/xcdt0 /dev/xct0 ... (6 Replies)
Discussion started by: ezlarry
6 Replies

LEARN ABOUT NETBSD

mfi

MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME

     mfi -- LSI Logic & Dell MegaRAID SAS RAID controller

SYNOPSIS

     mfi* at pci? dev ? function ?

DESCRIPTION

     The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including:

	   -   Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i
	   -   Intel RAID Controller SRCSAS18E, SRCSAS144E
	   -   LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID
	       SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i
	   -   IBM ServeRAID M1015, ServeRAID M5014

     These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives.

     Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers.  All RAID configuration is done
     through the controllers' BIOSes.

     mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.

EVENTS

     The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online.  The state-changed event will be sent
     to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)

HISTORY

     The mfi driver first appeared in NetBSD 4.0.

BSD
								  March 22, 2012							       BSD
All times are GMT -4. The time now is 08:50 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy