03-23-2004
Now you want to know what, if anything, /dev/dsk/c0t8d0 does for a living. If you are using lvm, do
pvdisplay /dev/dsk/c0t8d0
and see which volume group it belongs to. And then if that is anything that count as a alt_boot.
Of course, the real test would be to boot from it. It may be intended as a alt_boot, but not set up properly.
5 More Discussions You Might Find Interesting
1. Solaris
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)
Discussion started by: waibabe
1 Replies
2. Linux
Hi,
Am doing an enhancements related to monitoring a Linux disk I/O statistics.
The /proc/diskstats file is used to get the each disk I/O statistics. But, It returns the raw value.
How to calculate the Disk Queue Length and Disk Busy time from the raw values.
Guide me. (1 Reply)
Discussion started by: maruthu
1 Replies
3. AIX
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Discussion started by: filosophizer
9 Replies
4. Filesystems, Disks and Memory
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Discussion started by: terrya
1 Replies
5. AIX
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Discussion started by: terrya
3 Replies
HP(4) Kernel Interfaces Manual HP(4)
NAME
hp - RH-11/RP04, RP05, RP06 moving-head disk
DESCRIPTION
The octal representation of the minor device number is encoded idp, where i is an interleave flag, d is a physical drive number, and p is a
pseudodrive (subsection) within a physical unit. If i is 0, the origins and sizes of the pseudodisks on each drive, counted in cylinders
of 418 512-byte blocks, are:
disk start length
0 0 23
1 23 21
2 0 0
3 0 0
4 44 386
5 430 385
6 44 367
7 44 771
If i is 1, the minor device consists of the specified pseudodisk on drives numbered 0 through the designated drive number. Successively
numbered blocks are distributed across the drives in rotation.
Systems distributed for these devices use disk 0 for the root, disk 1 for swapping, and disk 4 (RP04/5) or disk 7 (RP06) for a mounted user
file system.
The block files access the disk via the system's normal buffering mechanism and may be read and written without regard to physical disk
records.
A `raw' interface provides for direct transmission between the disk and the user's read or write buffer. A single read or write call
results in exactly one I/O operation and therefore raw I/O is considerably more efficient when many words are transmitted. The names of
the raw files conventionally begin with an extra `r.' In raw I/O the buffer must begin on a word boundary, and raw I/O to an interleaved
device is likely to have disappointing results.
FILES
/dev/rp?, /dev/rrp?
SEE ALSO
rp(4)
BUGS
In raw I/O read and write(2) truncate file offsets to 512-byte block boundaries, and write scribbles on the tail of incomplete blocks.
Thus, in programs that are likely to access raw devices, read, write and lseek(2) should always deal in 512-byte multiples.
Raw device drivers don't work on interleaved devices.
HP(4)